Engine

Aluminum flywheel - 1979-88

Aluminum flywheelFIAT and Bertone X1/9 - 1979-1988 (1498cc) Reduces rotating mass - Total weight 7.95 lbs (3.6kg)

Aluminum flywheel - 1974-78

Aluminum flywheelFIAT X1/9 - 1974-1978 (1290cc) Special order item, allow 6 to 8 weeks for delivery  

Bell Housing to Block Dowel

      Bell housing to block alignment dowel FIAT 124 Spider, Spider 2000 and Pininfarina 1966-1985 FIAT 124 Sport Coupe FIAT and Bertone X1/9 2 required per motor Sold each

Timing Belt - 1974-78

Premium Dayco timing beltFIAT X1/9 - 1974-1978 (1290cc) Premium Dayco timing belt - Don't trust your motor to "no name" belts sold elsewhere A good timing belt is very important to the life of an engine - Don't take a chance on an old belt or one that...

Timing Belt - 1979-88

Premium timing beltFIAT X1/9 and Bertone - 1979-1988 (1498cc) Premium Dayco or Gates timing belt - Don't trust your motor to "no name" belts sold elsewhere A good timing belt is very important to the life of an engine - Don't take a chance on an old belt...

Main Bearing Set - 1438, 1608 and 1290, 1498cc

Main bearing set FIAT 124 Spider - 1966-1973 (1438 and 1608cc)FIAT 124 Sport Coupe - 1967-1973 (1438 and 1608cc)FIAT and Bertone X1/9 - 1974-1988 (1290 and 1498cc) Select desired size

Thrust Washer Set - Early

Thrust washer pairFIAT 124 Spider - 1966-1973 (1438 and 1608cc)FIAT 124 Sport Coupe - 1967-1973 (1438 and 1608cc)FIAT and Bertone X1/9 - 1974-1988   Choose Standard or Oversized option

Piston Pin

Piston or wrist pinFIAT 124 Spider, Spider 2000 and Pininfarina 1971-1985FIAT 124 Sport Coupe - 1971-1975FIAT and Bertone X1/9 - 1974-1988    

Piston Ring Set - 1498cc

Premium piston ring setFIAT X1/9 and Bertone - 1979-1988 (1498cc)   Premium rings manufactured in the USA   Note: The oil rings are an improved design which does not require sizing or grinding   Select the desired ring size above  

Crankshaft Timing Belt Gear - 3mm flange

Crankshaft timing belt gear with a 3mm flange FIAT 124 Spider, Spider 2000 and Pininfarina - 1977 (from engine # 0430996) to 1985 FIAT X1/9 - 1974-1978   Replace if you see any signs of wear   Steel gear, as original  

Exhaust Valve - SOHC 1290cc

Exhaust valve FIAT X1/9 - 1974-1978 (1290cc)   31mm diameter head  

Exhaust Valve - SOHC 1498cc

Exhaust valve FIAT and Bertone X1/9 - 1979-1988 (1498cc)   33mm diameter head    

Intake Valve - SOHC

Intake valve FIAT and Bertone X1/9 - 1974-1988 (1290 and 1498cc)   36mm head diameter  

Steel Valve Guide - 1290cc - 15mm OD

Steel valve guide - 15mm OD FIAT X1/9 - 1974-1978 (1290cc)   15mm outside diameter, 46.5mm total length  

Adjustable Cam Gear - 1974-78

High-performance adjustable aluminum cam pulleys Allison PerformanceFIAT X1/9 - 1974-1978 (1290cc)   Allows cam timing to be dialed in perfectly Includes a degree scale for precise adjustment Features rear timing belt guard Lightweight...

Adjustable Cam Gear - 1979-88

High-performance adjustable aluminum cam pulleys Allison Performance FIAT and Bertone X1/9 - 1979-1988 (1498cc)   Allows cam timing to be dialed in perfectly Includes a degree scale for precise adjustment Lightweight design

Valve Shim Kit

Valve shim set FIAT 124 Spider, Spider 2000 and Pininfarina - 1966-1985FIAT 124 Sport Coupe - 1967-1975FIAT and Bertone X1/9 - 1974-1988   Our Italian manufactured valve clearance adjusting shim kit comes complete with: Hard plastic case with...

Valve Shims

Valve shim - Choose sizes neededFIAT 124 Spider, Spider 2000 and Pininfarina - 1966-1985FIAT 124 Sport Coupe - 1967-1975FIAT and Bertone X1/9 - 1974-1988 Keep your 124 Spider running smoothly by regularly checking the valve adjustments   Please...

Top Hat Shim or Lash Cap

Top hat shim FIAT 124 Spider, Spider 2000 and Pininfarina - 1966-1985FIAT 124 Sport Coupe - 1967-1975FIAT and Bertone X1/9 - 1974-1988   This shim is used when valve clearance is too large to take up with the regular shims, which usually occurs when...

Tappet - Cam Follower

Shim bucket (Tappet or cam follower) FIAT 124 Spider, Spider 2000 and Pininfarina - 1966-1985FIAT 124 Sport Coupe - 1967-1975FIAT and Bertone X1/9 - 1974-1988  

Valve Spring Keeper

Valve spring keeperFIAT 124 Spider, Spider 2000 and Pininfarina - 1966-1985FIAT 124 Sport Coupe - 1967-1975FIAT and Bertone X1/9 - 1974-1988   2 required per valve or 16 per engine   Sold individually  

Non Magnetic Oil Drain Plug

Non-magnetic oil drain plugFIAT 124 Spider, Spider 2000 and Pininfarina - 1966-1985FIAT 124 Sport Coupe - 1967-1975FIAT and Bertone X1/9 - 1974-1988 (Transmission only) Requires a 12mm allen wrench - our part number LU0-001 Also fits transmission and...

Magnetic Oil Drain Plug

Magnetic oil drain plugFIAT 124 Spider, Spider 2000 and Pininfarina - 1966-1985FIAT 124 Sport Coupe - 1967-1975FIAT and Bertone X1/9 - 1974-1988 (Transmission only) Requires a 17mm wrench Also fits transmissions and differentials Does not fit the new...

Oil Drain Plug Bolt Allen Wrench

Oil drain plug allen wrenchFIAT 124 Spider, Spider 2000 and Pininfarina - 1966-1985FIAT 124 Sport Coupe - 1967-1975 FIAT and Bertone X1/9 - 1974-1988   Tool handle length may vary Note: this tool does not work on the drain plugs installed in the new...

Oil Pump

Oil pumpFIAT X1/9 and Bertone - 1974-1988

Oil Pump Drive Gear Bushing

Oil pump drive gear bushingFIAT 124 Spider, Spider 2000 and Pininfarina - 1966-1985FIAT Sport Coupe - 1967-1975FIAT and Bertone X1/9 - 1974-1988 Presses into the engine block and holds the oil pump drive gear

High Performance Oil Sending Unit Adaptor

  Oil sender T bolt and banjo doublerFIAT 124 Spider, Spider 2000 and Pininfarina - 1966-1985 FIAT 124 Sport Coupe - 1967-1975 FIAT and Bertone X1/9 - 1974-1988   Allows the use of 2 senders when only one port is available

Flame Trap

Flame trap or spark arrestorFIAT 124 Spider, Spider 2000 and Pininfarina - 1966-1985FIAT 124 Sport Coupe - 1967-1975FIAT and Bertone X1/9 - 1974-1988 Goes in the air cleaner end of the long crankcase breather / ventilation hose

Oil Filler Cap

Oil filler capFIAT 124 Spider, Spider 2000 and Pininfarina - 1966-1985FIAT 124 Sport Coupe - 1967-1975FIAT and Bertone X1/9 - 1974-1988 Supplied complete with new seal

Billet Oil Filler Cap

Billet oil filler cap - FIAT or Scorpion styleFIAT 124 Spider, Spider 2000 and Pininfarina - 1966-1985FIAT 124 Sport Coupe - 1967-1975FIAT and Bertone X1/9 - 1974-1988Lancia Scorpion - 1976-1977   Supplied with new seal - an excellent engine bay...

Oil Pressure Light Sending Unit

Oil pressure light sending unit (switch)FIAT 124 Spider, Spider 2000 and Pininfarina - 1966-1985FIAT 124 Sport Coupe - 1967-1975FIAT and Bertone X1/9 - 1974-1988 Controls the low pressure warning light For the gauge level sending unit, use LU8-047

Oil Pressure Gauge Sending Unit Boot

Oil pressure gauge sending unit bootFIAT 124 Spider, Spider 2000 and Pininfarina - 1966-1985FIAT 124 Sport Coupe - 1967-1975FIAT and Bertone X1/9 - 1974-1988   Fits the oil pressure senders   Correct color    

Oil Gauge Sending Unit

Oil pressure gauge sending unitFIAT 124 Spider, Spider 2000 and Pininfarina - 1966-1985 FIAT 124 Sport Coupe - 1967-1975 FIAT and Bertone X1/9 - 1974-1978   Controls the gauge level indicator   For the light sending unit LU8-007

Crank Shaft Galley Plug - 10mm

Engine crank shaft oil galley plugFIAT 124 Spider, Spider 2000 and Pininfarina - 1966-1985FIAT 124 Sport Coupe - 1967-1975FIAT and Bertone X1/9 - 1974-1988 10mm   Four required per crankshaft

Isky High Performance Valve Springs

High performance Iskenderian valve spring setFIAT 124 Spider, Spider 2000 and Pininfarina - 1966-1985FIAT 124 Sport Coupe - 1967-1975FIAT and Bertone X1/9 - 1974-1988 Specially engineered for high RPM street or race motors to avoid coil bind and...

14-Bolt Head Gasket

14-Bolt head gasket FIAT and Bertone X1/9 - 1974-1988   87.2mm bore diameter   1.85mm thick  

10-Bolt Head Gasket

10-Bolt head gasket FIAT X1/9 - 1974-1982   87.2mm bore diameter   1.5mm thick  

Valve Guide Seal

Valve guide sealFIAT 124 Spider, Spider 2000 and Pininfarina - 1966-1985FIAT 124 Sport Coupe - 1967-1975FIAT and Bertone X1/9 - 1974-1988 Sold individually

Crankshaft Front Seal

Front crank shaft oil sealFIAT 124 Spider, Spider 2000 and Pininfarina - 1966-1985FIAT 124 Sport Coupe - 1967-1975FIAT and Bertone X1/9 - 1974-1988  

Lower Transaxle Mount

Lower transmission or transaxle mountFIAT X1/9 - 1975-1980   Intended for 1975-80 models but can be used on later X1/9s and Bertone - For later models there is no provision for attachement of the exhaust system