FIAT Spider Ignition Pickup Testing | Auto Ricambi FIAT Spider Ignition Pickup Testing | ...

Classic FIAT 124 Spider Ignition Pickup Testing


How to properly test a FIAT Spider ignition pickup.

Having electronic ignition problems and trying to determine which component needs to be replaced? Testing the pickup is quick and easy.

Find the lead coming from the distributor and follow it over to the module mounted behind the coil. Unplug the lead from the module.

Using a multi-meter insert probes, one in each connector from the pickup. 

Be sure your meter is set on ohms. If you have a reading of 700 to 800 ohms your pickup is good.

If you need a replacement, use one of these replacement ignition pickups listed below from Auto Ricambi.

SKU #:  


Previous Post Next Post

  • Frank Battaglia
Comments 0
Leave a comment
Your Name:*
Email Address:*
Message: *

Please note: comments must be approved before they are published.

* Required Fields