Classic FIAT 124 Spider Heater Valve Installation
The technical tips listed below are intended to aid in the care of your Fiat 124 Spider and should be used accordingly. They are based on many years of experience but are in no way a replacement for factory recommendations. Seek the professional mechanical assistance for all issues beyond your abilities.
Auto Ricambi, LLC is in no way responsible from the consequences of applying these technical tips. By using (accessing) these technical tips you agree to these terms.
Be sure you have two new gaskets for the new heater valve. And be certain to review our tech tip on bleeding the cooling system once you have completed this proceedure.
• First drain the cooling system. Be certain that the coolant level is below the level of the heater tubes. Disconnect the heater hose that attaches to the heater valve tube.
• From the passenger side foot well, remove the heater valve from the heater core. Remove the tube from the heater valve and install the tube onto the new valve.
• If your car still had the original heater valve (one with an integral capillary tube), it will be necessary to bend the short pipe about 10 degrees when installing the new valve, to keep it pointed in the right direction. Or you can purchase our new heater tube (SKU HE6-498) which will accomodate the newer style heater valves.
• Install the tube on the valve and put the valve on the heater core while the tube goes through the firewall. See which way the pipe needs to be bent. Remove it, bent it a little, and repeat the procedure until the valve can be installed flush with the heater core.
Fiat discontinued the original capillary style heater valve almost 20 years ago, and substituted this version which was originally fitted on the Fiat 124 Sedan and X 1/9.
Heater Valve Kit - HE6-499 (recommended if for cars fitted with original capillary style heater valves)
Heater Valve - HE6-498
Gaskets - HE6-072
Copyright 2011 - Auto Ricambi, LLC
- Csaba Vandor