Accelerator Cable - 1975-77

Accelerator cableFIAT 124 Spider and Sport Coupe 1975 to early 1977 Attaches to drum on carburetor (to engine Number 572367)

Accelerator Cable - 1977-80 Carbureted

Accelerator cableFIAT 124 Spider and Spider 2000 - 1977-1980 Attaches to bell crank linkage on cam tower (from engine Number 572367)  

Accelerator Cable - 1980-85 Injected

Accelerator cableFIAT Spider 2000 and Pininfarina 1980-1985 with Bosch fuel Injection

Accelerator Cable for IDF conversion 1966-85

      Accelerator cable with built in return spring for IDF conversionsFIAT 124 Spider, Sport Coupe 1966-1985 On 1975-1985 Spiders these will work with the stock gas pedal, but the rubber bumper on firewall end may be cut off On 1966-1974...

Choke or Hand Throttle Cable

Choke or hand throttle cableFIAT 124 Spider and Sport Coupe 1966-1978 Original style choke cable can also be used as replacement hand throttle cable if shortened Mounts the same way as the original - 46.5"  (118cm) overall length Use...

Choke Cable Clip

Choke or hand throttle cable clipFIAT 124 Spider and Sport Coupe 1966-1978 Fits the original choke or hand throttle cables and it will also work for our CA1-400 cable.  Holds the cable to the under dash bracket (bracket not included)

Automatic Kick Down Cable - Carbureted

    Kickdown cableFIAT Spider 2000 - 1979-1980 (automatic transmission and carburetor)

Automatic Kick Down Cable - Injected

Kickdown cableFIAT Spider 2000 and Pininfarina - 1980-1985 (automatic transmission and Bosch fuel injection) An Auto Ricambi Exclusive - Not found anywhere else!

Accelerator Metal Cable Clip - 1966-80

NOS (New Old Stock) accelerator linkage or throttle cable end metal clip FIAT 124 Spider and Spider 2000 - 1966-1980 FIAT 124 Sport Coupe 1967-1974 FIAT and Bertone X1/9 1974-1988   Holds a cable end or rod end onto the ball stud  

Accelerator Plastic Cable Clip - 1966-80

Accelerator cable end plastic clip FIAT 124 Spider, Spider 2000 - 1966-1980 (carbureted) FIAT 124 Sport Coupe 1967-1975 FIAT and Bertone X1/9 1974-1988 Replaces the original metal two piece socket and clip   For the metal version, see clip...

Accelerator Linkage 3-Piece Rod End - 1966-80

Accelerator linkage 3-piece rod end FIAT 124 Spider and Spider 2000 - 1966-1980 (carbureted) FIAT 124 Sport Coupe 1967-1975 FIAT and Bertone X1/9 1974-1988   Replaces the original metal two piece socket and clip Three piece construction: ball,...

Accelerator Linkage Rod End - 1966-80

Accelerator linkage rod end FIAT 124 Spider and Spider 2000 - 1966-1980 (carbureted) FIAT 124 Sport Coupe 1967-1975 FIAT and Bertone X1/9 1974-1988   Replaces the original metal two piece socket and clipM5x0.80 threads

Ball End - Carburetor / Accelerator Linkage

    Carburetor accelerator linkage ball and socket end FIAT 124 Spider, Spider 2000 and Pininfarina 1966-1985 FIAT 124 Sport Coupe 1967-1975 FIAT and Bertone X1/9 1974-1988   Fits all standard FIAT linkage rods and is ideal for performance...

Accelerator Linkage Ball End - 6mm

    Carburetor accelerator linkage ball and socket end   Ideal for making custom throttle linkages, hood or trunk props 6 x 1.00mm thread - Larger than stock FIAT throttle linkages

Cable Linkage Adaptor

  Accelerator cable to carburetor  linkage adaptor Ideal for performance modifications

Ball and Socket End - Carburetor / Accelerator Linkage

Carburetor accelerator linkage ball and socket end Attaches on the end of a cable Used when converting 1975-1977 124 Spiders to DFEV carburetor

Universal Spring for Accelerator Linkages

Universal spring for accelerator linkages   Total length is 51mm (~2") For the holder use sku CA0-135

Barrel Nut - Accelerator Cable

      Accelerator cable barrel nut   Ideal for linkage modifications

Spring Holder for Accelerator Linkages

Universal spring holder for accelerator linkages   Center to center between the holes is 42mm (~1-5/8") 8mm hole bolts to one of the carburetor studs, while the smaller hole is for the spring For the spring, use sku CA0-120