Hood Release Latch - 1966-82

  New hood release latchFIAT 124 Spider and Sport Coupe 1966-1982 Some models may require slight modifications

Hood Release Cable - 1966-85

Hood release cableFIAT 124 Spider, Spider 2000 and Pininfarina 1966-1985FIAT 124 Sport Coupe - 1967-1975

Accelerator Metal Cable Clip - 1966-80

NOS (New Old Stock) accelerator linkage or throttle cable end metal clip FIAT 124 Spider and Spider 2000 - 1966-1980 FIAT 124 Sport Coupe 1967-1974 FIAT and Bertone X1/9 1974-1988   Holds a cable end or rod end onto the ball stud  

Accelerator Plastic Cable Clip - 1966-80

Accelerator cable end plastic clip FIAT 124 Spider, Spider 2000 - 1966-1980 (carbureted) FIAT 124 Sport Coupe 1967-1975 FIAT and Bertone X1/9 1974-1988   Replaces the original metal two piece socket and clip   For the metal version, see clip...

Accelerator Linkage 3-Piece Rod End - 1966-80

Accelerator linkage 3-piece rod end FIAT 124 Spider and Spider 2000 - 1966-1980 (carbureted) FIAT 124 Sport Coupe 1967-1975 FIAT and Bertone X1/9 1974-1988   Replaces the original metal two piece socket and clip Three piece construction: ball,...

Accelerator Linkage Rod End - 1966-80

Accelerator linkage rod end FIAT 124 Spider and Spider 2000 - 1966-1980 (carbureted) FIAT 124 Sport Coupe 1967-1975 FIAT and Bertone X1/9 1974-1988   Replaces the original metal two piece socket and clipM5x0.80 threads

Ball End - Carburetor / Accelerator Linkage

Carburetor accelerator linkage ball and socket endFIAT 124 Spider, Spider 2000 and Pininfarina 1966-1985FIAT 124 Sport Coupe 1967-1975FIAT and Bertone X1/9 1974-1988 Fits all standard FIAT linkage rods and is ideal for performance modifications 5mm...

Accelerator Linkage Ball End - 6mm

    Carburetor accelerator linkage ball and socket end   Ideal for making custom throttle linkages, hood or trunk props 6 x 1.00mm thread - Larger than stock FIAT throttle linkages

Cable Linkage Adaptor

  Accelerator cable to carburetor  linkage adaptor Ideal for performance modifications

Ball and Socket End - Carburetor / Accelerator Linkage

Carburetor accelerator linkage ball and socket end Attaches on the end of a cable Used when converting 1975-1977 124 Spiders to DFEV carburetor

Universal Spring for Accelerator Linkages

Universal spring for accelerator linkages   Total length is 51mm (~2") For the holder use sku CA0-135

Barrel Nut - Accelerator Cable

Accelerator cable barrel nut Installs on cable and can be locked in place with a set screw Ideal for linkage modifications

Spring Holder for Accelerator Linkages

Universal spring holder for accelerator linkages   Center to center between the holes is 42mm (~1-5/8") 8mm hole bolts to one of the carburetor studs, while the smaller hole is for the spring For the spring, use sku CA0-120