Remanufactured Cylinder Head - 1756cc

  Remanufactured 1756cc cylinder headFIAT 124 Spider and Sport Coupe 1974-1978 (1756cc) Our Auto Ricambi remanufactured heads come complete with 4 new Italian manufacture intake valve 4 new Italian manufacture exhaust valves 8 new steel valve...

High Performance Cylinder Head - 1756cc

  High performance 1756cc cylinder headFIAT 124 Spider and Sport Coupe 1974-1978 (1756cc) This Auto Ricambi cylinder head has CNC Ported intake and exhaust ports 4 large stainless steel 43mm intake valves 4 large stainless steel 37.5mm...

Remanufactured Cylinder Head - 1995cc

Remanufactured 1995cc cylinder head FIAT Spider 2000 and Pininfarina 1980-1985 - with Fuel Injected engines   Our Auto Ricambi remanufactured heads come complete with 4 new Italian manufacture intake valve 4 new Italian manufacture...

Reher-Morrison High Performance Cylinder Head - 1995cc

Reher-Morrison High performance 1995cc cylinder headFIAT Spider 2000 and Pininfarina 1980-1985 - with Fuel Injection (See Note below)   This Auto Ricambi cylinder head features the following: Machined and assembled by the famed...

High Performance Cylinder Head - 1995cc

  High performance 1995cc cylinder headFIAT Spider 2000 and Pininfarina 1980-1985 - with Fuel Injection (See Note below) This Auto Ricambi cylinder head has CNC Ported intake and exhaust 4 large stainless steel 43mm intake valves 4...

Stock Camshaft - New

Stock camshaft for carbureted or fuel injected engines Fiat 124 Spider, Sport Coupe, Spider 2000 and Pininfarina - 1966-1985   Can be used on intake or exhaust side - Has distributor drive gear Ground in the U.S. from European made blanks Sold...

Performance Colombo & Bariani 282 Camshaft

      Colombo and Bariani 282 performance camshaftFiat 124 Spider, Sport Coupe, Spider 2000 - Carbureted SOLD EACH This is a NEW cam, not reground, not welded, but made by Colombo and Bariani in Italy from a NEW billet! Its hardness...

Performance Colombo & Bariani 294 Camshaft

  Colombo and Bariani 294 performance camshaftFiat 124 Spider, Sport Coupe, Spider 2000 - Carbureted SOLD EACH This is a NEW cam, not reground, not welded, but made by Colombo and Bariani in Italy from a NEW billet! Its hardness is independently...

274 Camshaft for Fuel Injected Engines

  New steel billet performance camshaft for fuel injected engines (Intake or exhaust) Fiat Spider 2000 and Pininfarina - 1980-1985   274 degree duration and 56 degrees of overlap at running clearance Works on intake or exhaust...

284 High-Performance Camshaft

New steel billet performance camshaft for carbureted or fuel injected engines (Intake or exhaust) Fiat 124 Spider, Sport Coupe, Spider 2000 and Pininfarina - 1966-1985   284 degree duration and 66 degrees of overlap at running clearances 10...

285 High-Performance Camshaft

New steel billet performance camshaft for carbureted or fuel injected engines (Intake or exhaust) Fiat 124 Spider, Sport Coupe, Spider 2000 and Pininfarina - 1966-1985   285 degree duration and 68 degrees of overlap at running clearances 9.8mm...

410 Autocross Camshaft

  New steel billet performance camshaft for highly tuned street or autocross cars (Intake or exhaust) Fiat 124 Spider, Sport Coupe, Spider 2000 and Pininfarina - 1966-1985   410 degree duration and 68 degrees of overlap at running...

430 Race Camshaft

  Performance camshaft for highly tuned autocross or full race cars - New steel billet camshaft Fiat 124 Spider, Sport Coupe, Spider 2000 and Pininfarina - 1966-1985   294 degree duration 10.9mm lift Lash clearance: Intake 0.20mm (0...

Performance Reground Intake Camshaft

  Reground intake side performance camshaft Fiat 124 Spider, Sport Coupe, Spider 2000 and Pininfarina - 1966-1985 40/80 exhaust reground camshaft 10.1mm lift, 240 degrees duration at .050" (1.25mm) clearance Lash clearance 0.012" (0...

Performance Reground Exhaust Camshaft

  Reground exhaust side performance camshaft Fiat 124 Spider, Sport Coupe, Spider 2000 and Pininfarina - 1966-1985 40/80 exhaust reground camshaft 10.1 lift, 240' duration at .050" (1.25mm) clearance Lash clearance 0.014" (0...

Cylinder Head Dowel

      Cylinder head alignment dowelFIAT 124 Spider, Sport Coupe, Spider 2000 and Pininfarina - 1966-1985  Need 2 per motor

Cylinder Head Air Injection Plug Set

Cylinder head air injection plug setFIAT 124 Spider 1974-1978 (1756cc) Plugs the four holes left when removing the air injection manifold Not for use on pollution controlled motor vehicles.

FIAT Valve Cover Hold Down Set

Custom billet valve cover hold down bolt set with FIAT engraved on the top FIAT 124 Spider, Sport Coupe, Spider 2000 and Pininfarina - 1966-1985   Supplied with gaskets and a wrench to prevent over tightening

Blue FIAT Valve Cover Hold Down Set

Custom billet valve cover hold down bolt set with blue FIAT logo FIAT 124 Spider, Sport Coupe, Spider 2000 and Pininfarina - 1966-1985   Enhance the looks of the engine compartment with these custom knobs!   Add four gaskets if needed, our...

Red Valve Cover Hold Down Bolt Set

Custom billet valve cover hold down bolt set with red FIAT text on the topFIAT 124 Spider, Sport Coupe, Spider 2000 and Pininfarina 1966-1985 Enhance the looks of the engine compartment with these custom knobs! Add four gaskets if needed, our part...

ABARTH Valve Cover Hold Down Set

Custom billet valve cover hold down set with ABARTH engraved on the top FIAT 124 Spider, Sport Coupe, Spider 2000 and Pininfarina - 1966-1985   Enhance the looks of the engine compartment with these custom knobs!   Add four gaskets if...

Valve Cover Bolt Tool

Custom billet valve cover bolt tool FIAT 124 Spider, Sport Coupe, Spider 2000 and Pininfarina - 1966-1985   Wrench for our custom billet valve cover bolts - 19mm   Does not fit stock valve cover bolts  

Blank Valve Cover Bolt Set

Custom billet valve cover hold down bolt set  FIAT 124 Spider, Sport Coupe, Spider 2000 and Pininfarina - 1966-1985   Enhance the looks of the engine compartment with these custom knobs!   Add four gaskets if needed, our part number...

Thread Insert - 8x1.25 Inside Thread

Thread insert - 8 x 1.25mm inside threads - 12 x 1.25mm outside threads - 15mm long Used to repair stripped holes, especially in cylinder heads  

Thread Insert - 6x1.0 Inside Threads

Thread insert - 6 x 1.0mm inside threads - 10 x 1.25mm outside threads - 14mm long Used to repair stripped holes, especially in cylinder heads    

Repair Stud - 8x1.25 to 10x1.50

Repair stud to replace 8mm studs   The threads on one side are 8 x 1.25mm, on the other 10 x 1.50mm   Total length 45mm, the 8mm diameter portion is 29mm long   Especially useful for repairing stripped cylinder head studs, just drill...