Head Light Trim Ring Gasket - 1966-79

      Head light trim ring surround gasketFIAT 124 Spider and Spider 2000 - 1966-1979 One continuous piece of molded rubber just as original Ideal for those who care about the small details On 1979 models this is used up to Spares Number...

Driver Side Head Light Trim Ring Gasket - 1979-85

Driver (left) side molded plastic headlight trim ring mounting gasketFIAT Spider 2000 and Pininfarina - 1979-1985 This gasket only fits 1979 Spiders from Spares Number 1948798-on Earlier Spiders, use RS6-385

Passenger Side Head Light Trim Ring Gasket - 1979-85

Passenger (right) side molded plastic headlight trim ring mounting gasketFIAT Spider 2000 and Pininfarina - 1979-1985 This gasket only fits 1979 Spiders from Spares Number 1948798-on Earlier Spiders, use RS6-385

Headlight Bucket to Body Gasket

Headlight bucket to body rubber gasket FIAT 124 Spider, Spider 2000 and Pininfarina - 1966-1985 FIAT 124 Sport Coupe - 1967-1969   Faithful reproduction   

Side Marker Boot

Side markers rubber bootFIAT 124 Spider, Spider 2000 and Pininfarina - 1966-1985 FIAT 124 Sport Coupe - 1967-1975 FIAT and Bertone X1/9 - 1974-1988

Side Marker Surround Rubber Gasket - 1979-85

    Front or rear side marker surround rubber gasketFIAT Spider 2000 and Pininfarina - 1979-1985 Located around the stainless steel side marker surround

Rubber Door Weatherstrip Kit - Spider

    Door opening rubber weatherstrip kitFIAT 124 Spider, Spider 2000 and Pininfarina - 1966-1985 One set does both left and right door openings - Vulcanized components, directly imported from the manufacturers in Europe for an exact OEM...

Door Glass Weatherstrip Kit - with Felt

    Door glass weatherstrip setFIAT 124 Spider, Spider 2000 and Pininfarina - 1966-1985 Located in the chrome molding and rests against the side window. Also called widow scraper seal. Unlike others, our seals are lined with felt for...

Door Glass Vertical Channel Felt - Spider

  Door glass vertical channel felt "U" moldingFIAT 124 Spider, Spider 2000 and Pininfarina - 1966-1985   One piece is long enough to replace both the front and rear felt in one door

Door Glass Vertical Channel Felt - Sport Coupe

Door glass vertical channel felt "U" moldingFIAT 124 Sport Coupe - 1966-1975   One piece is long enough to replace both the front and rear felt in both doors

Rubber “A” Pillar Plug

Rubber A pillar capFIAT 124 Spider, Spider 2000 and Pininfarina - 1966-1985 Located at the front upper door opening, plugs the end of the door weatherstripping

Door Glass Channel Rubber Plug

Door glass channel upper rubber plugFIAT 124 Spider, Spider 2000 and Pininfarina - 1966-1985 Located in upper rear corner of the vent window frame

Rubber "B" Pillar Vertical Top Frame Molding

      Rubber B pillar moldingFIAT 124 Spider, Spider 2000 and Pininfarina - 1966-1985  Located at the leading edge of the rear quarter window, seals against the door window Fits either side This is the rubber part only, for the...

Rubber "B" Pillar Molding Brace

      Inner U-brace for the rubber B pillar molding (RE2-448)FIAT 124 Spider, Spider 2000 and Pininfarina - 1966-1985  This metal brace is located inside the rubber B-pillar molding Replacement is recommended, as the originals...

Rubber B-Pillar Caps - 1966-78

Rubber "B" pillar boot setFIAT 124 Spider - 1966-1978 One left and one right B pillar cap Located at the rear upper door opening Later versions see RE2-445

Rubber B-Pillar Caps - 1979-85

  Rubber "B" pillar boot or cap setFIAT Spider 2000 and Pininfarina - 1979-1985 One left and one right B pillar cap Located at the rear upper door opening For the earlier version see RE2-442

Left Front Door Corner Rubber Molding

Left front door corner rubber moldingFIAT 124 Spider, Spider 2000 and Pininfarina - 1966-1985 Located behind stainless steel door corner trim

Left Rear Rubber Door Corner Molding

Left rear door corner rubber moldingFIAT 124 Spider, Spider 2000 and Pininfarina - 1966-1985 Located behind stainless steel door corner trim 

Right Front Rubber Door Corner Molding

Right front door corner rubber moldingFIAT 124 Spider, Spider 2000 and Pininfarina - 1966-1985 Located behind stainless steel door corner trim

Right Rear Rubber Door Corner Molding

Right rear door corner rubber moldingFIAT 124 Spider, Spider 2000 and Pininfarina - 1966-1985 Located behind stainless steel door corner trim

Spider Vent Window Seals - 1966-82

      Vent or wing window seal pair (left and right)FIAT 124 Spider and Spider 2000 - 1966-1982 Note: This item can be difficult to install, a lot of patience and some trimming may be necessary

Sport Coupe Vent Seal Set - 1967-69

Vent or wing window seal pair (left and right) FIAT 124 Sport Coupe A-Series - 1967-1969   Note: This item can be difficult to install   An exact replica made in Italy by the original manufacturer - OEM    

A-Pillar Seals Pair - 1966-79

Rubber "A" pillar seal pair (driver and passenger side)FIAT 124 Spider and Spider 2000 - 1966-1979 Mounts on windshield frame

A-Pillar Seal - PAIR - 1980-85

Rubber "A" pillar sealsFIAT Spider 2000 and Pininfarina - 1980-1985 Mounts on windshield frame PAIR, left and right side Perfectly molded as original Can also be used on earlier Spiders

A-Pillar Metal Molding - Driver Side

Metal "A" pillar molding driver (left) sideFIAT 124 Spider, Spider 2000 and Pininfarina - 1966-1985 Mounts on windshield frame and holds the door weatherstripping and also the A-pillar seal Manufactured in Italy using the original FIAT tooling,...

A-Pillar Metal Molding - Passenger Side

Metal "A" pillar molding passenger (right) sideFIAT 124 Spider, Spider 2000 and Pininfarina - 1966-1985 Mounts on windshield frame and holds the door weatherstripping and also the A-pillar seal.   Manufactured in Italy using the...

Rear Quarter Window Seals - Spider

Rubber seals for top frame rear (triangular) windowFIAT 124 Spider, Spider 2000 and Pininfarina - 1966-1985   Located at the trailing and lower edges of the rear 1/4 window (sold as a set for both sides)   Molded with the correct...

Rear Vent Window Seals - Sport Coupe 1967-72

Rubber seals for rear quarter vent windowsFIAT 124 Sport Coupe - 1967-1972   Sold as a set for both sides   Molded with the correct contour   Made in Italy using the original OEM molds  

Rear Vent Seal - Sport Coupe 1973-75

Rubber seals for rear quarter vent windowsFIAT 124 Sport Coupe - 1973-1975   Sold as a set for both sides Molded with the correct contour Made in Italy using the original OEM molds  

Rubber Wiper Cowl Drains

    Rubber wiper cowl drain pairFIAT 124 Spider and Sport Coupe - 1966 to mid-1978 The exact reproduction of the original parts that drain water from the cowl to the engine side of the firewall Sold as a pair

Windshield Surround Gasket - OEM

    OEM windshield surround rubber molding gasketFIAT 124 Spider, Spider 2000 and Pininfarina - 1966-1985 Improved later design as found on Pininfarina Spiders  OEM Original manufacturer - be wary of ill fitting cheaper...

Heater Tube Body Pass Through Gasket - OE with Metal Insert

      Heater tube pass through gasket with metal insert molded inside just like originalFIAT 124 Spider, Sport Coupe, Spider 2000 and Pininfarina 1966-1985 Located on the firewall where the heater tubes pass into the engine...

Heater Tube Body Pass Through Gasket

Heater tube pass through gasketFIAT 124 Spider, Sport Coupe, Spider 2000 and Pininfarina 1966-1985 Located on the firewall where the heater tubes pass into the engine compartment A faithfully molded all rubber reproduction of the original.

Trunk Rubber Molding - Spider

Trunk rubber moldingFIAT 124 Spider, Spider 2000 and Pininfarina - 1966-1985   Rubber molding for entire trunk compartment   Vulcanized components, directly imported from the manufacturers in Europe for an exact OEM quality fit

Lower Rear Trunk Rubber Molding - Sport Coupe

Lower rear trunk rubber moldingFIAT 124 Sport Coupe - 1967-73 Rubber molding which fits into the rear lower trunk compartment seal holder Vulcanized components, directly imported from the manufacturers in Europe for an exact OEM quality fit

Trunk Rubber Molding Pad - 1978-85

    Trunk rubber molding padFIAT 124 Spider, Spider 2000 and Pininfarina - 1978-1985 These rare Auto Ricambi Exclusive OEM item are located at either side of the trunk rubber base They keep the trunk lid from hitting the body and chipping...

Trunk Prop Rubber End

Trunk prop rubber endFIAT 124 Spider - 1966-1978

Fuel Filler Door Rubber Pad

Fuel filler door rubber padFIAT 124 Spider, Spider 2000 and Pininfarina - 1966-1985 Prevents the fuel filler lid from banging against the body of your FIAT Spider

Fuel Filler Neck Grommet

Fuel filler neck rubber grommetFIAT and Bertone X1/9 - 1974-1988FIAT 124 Rally CSA (FIAT 124 Abarth) Seals the fuel filler pipe as it enters the body

Steering Column Gasket at Firewall - 1966-72

      Steering shaft gasket at the firewallFIAT 124 Spider - 1966-1972

Steering Column Gasket at Firewall - 1972-85

Steering shaft gasket at firewallFIAT 124 Spider, Spider 2000 and Pininfarina - 1972-1985

Grille Surround Trim Gasket - 1966-85

Grille surround trim gasketFIAT 124 Spider, Spider 2000 and Pininfarina - 1966-1985 Trim to fit - approximately 59" (150cm) long

Radiator Opening Vertical Rubber - 1966-85

Engine compartment front vertical rubber FIAT 124 Spider, Spider 2000 and Pininfarina - 1966-1985   Located on either side of lower radiator support   Sold as a pair  

Engine Compartment Front Rubber - 1966-82

    Engine compartment front rubber moldingFIAT 124 Spider, Spider 2000 and Pininfarina - 1966-1982 Located just in front of the radiator on top of the core support

Engine Compartment Rubber - 1985

Engine compartment side rubber molding FIAT 124 Pininfarina - 1985 Fits along the fenders and rear of the engine compartment where the hood meets the body along fender One continuous piece  

Engine Compartment Side Rubber - 1966-84

    Engine compartment side rubber molding FIAT 124 Spider, Spider 2000 and Pininfarina - 1966-1984 Fits along the fender where the hood meets the body along fender Left or right, sold individually

Hood to Cowl End Pad

Rubber to cowl hood end pad FIAT 124 Spider, Spider 2000 and Pininfarina - 1966-1985   Replace your worn pads with new hood end rubber pads   These will keep the hood corners from vibrating, reduce rattles and improve fit and finish on...

Engine Compartment Rear Seal - 1966-78

  Hood to cowl sealFIAT 124 Spider - 1966-1978  Slides into existing plastic channel, slightly thicker than original

Cowl to Body Seal - 1966-78

Wiper cowl to body seal FIAT 124 Spider - 1966-1978   Fits under the front and side edges of the cowl  

Engine Compartment Rear Seal - 1979-85

Hood to cowl sealFIAT Spider 2000 and Pininfarina - 1979-1984 Also fits some early 1985 models without rack and pinion steering and can be used on earlier Spiders Pinches between the front of the cowl and the body.  

Hood Insulation Pad Pair - 1966-78

Hood insulation liner pad FIAT 124 Spider - 1966-1978   A pair (left and right) of black perforated vinyl with 1/2" (12mm) foam padding   Some Spiders had space between the hood and its braces to tuck the insulation in, some had places for...

OEM Hood Insulation Pad Pair - 1966-78

OEM Hood insulation liner pad set FIAT 124 Spider - 1966-1978   A pair (left and right) of black perforated vinyl with OE style batting   Some Spiders had space between the hood and its braces to tuck the insulation in, some had places for...