Alarm Clock with 124 Spider Speedometer Face

Custom alarm clock with Fiat 124 Spider speedometer face   Show your FIAT pride with this unique item - A great piece for the home or office! Uses one AA battery    

Custom Watch with 124 Spider Speedometer Face

Custom watch with Fiat 124 Veglia style speedometer face    Show your FIAT pride with this one of a kind exclusive Auto Ricambi item!   Metal watch with black strap   Note: there may be slight differences in the exact appearance...

FIAT Electrics for Everyone Manual

FIAT Electrics for Everyone - by Jack Ashcraft    The definitive guide to understanding the electrical systems of the classic FIAT 124 Spider, 124 Coupe, and X1/ 9. A text for learning by the novice, a good guide for the apprentice, and a...

1980 Vehicle Emission Decal - 49 State

Vehicle emission control information decal FIAT Spider 2000 - 1980 (49 State) with Fuel Injection   Approximately 150mm x 75mm   Normally located in the center of the cowl panel, under the hood  

1981 Vehicle Emission Decal - California

Vehicle emission control information decal FIAT Spider 2000 - 1981 (California)   Approximately 150mm x 75mm   Normally located in the center of the cowl panel, under the hood  

Early 1980 Vehicle Emission Decal - California

Vehicle emission control information decal FIAT Spider 2000 - Early 1980 (California) with Fuel Injection   Approximately 150mm x 75mm   Normally located in the center of the cowl panel, under the hood  

Late 1980 Vehicle Emission Decal - California

Vehicle emission control information decal FIAT Spider 2000 - Late 1980 (California) with Fuel Injection   Approximately 150mm x 75mm Normally located in the center of the cowl panel, under the hood  

1980 Vehicle Emission Decal - Canada

Vehicle emission control information decal FIAT Spider 2000 - 1980 (Canada) with Fuel Injection   Approximately 150mm x 75mm   Normally located in the center of the cowl panel, under the hood  

Brake Caliper Wedge Kit for One Axle

  Brake caliper wedge kit - New Old Stock FIAT parts in the original FIAT bag FIAT 124 Spider, Sport Coupe, Spider 2000 and Pininfarina - 1966-1985   This kit contains parts for two wheels (one axle):   Four newer style caliper...

Wilwood Caliper Big Brake Kit - Vented Rotors

  Wilwood big brake kit with vented brake rotors FIAT 124 Spider, Sport Coupe, Spider 2000 and Pininfarina - 1966-1985   Our complete kits include: 2 Wilwood four-piston high performance brake calipers 2 10.25" (260mm) vented brake...

Heater Fan Motor - Auto Ricambi Special

Auto Ricambi Special single speed heater fan or blower motor assembly FIAT 124 Spider, Sport Coupe, Spider 2000 and Pininfarina - 1966-1985   To change this fan motor to a two speed style see HE0-502  

Battery Cover Hold Down Nut - 1975-82

Battery cover hold down nut FIAT 124 Spider and Spider 2000 - 1975-1982   These faithful reproductions are used to hold the battery cover down in the trunk of your Spider   Sold individually - Two needed per car

LED Tail Light Bulb Kit - 1970-85

LED tail light bulb set Fiat 124 Spider, Spider 2000, Pininfarina - 1970-1985 and Sport Coupe - 1967-1969 & 1973-1975   These German made LED bulbs use much less power than conventional incandescent bulbs allowing them to stay cooler,...

Interior Courtesy Light - 1968-82 with Bezel

Interior courtesy lightFIAT 124 Spider, Spider 2000 - 1968-1982   This light has three electrical connections and includes the metal surround exactly like the original      

Pauter Chrome Moly Connecting Rod Set - 1995cc

Set of 4 Pauter 4340 chrome moly connecting rods FIAT Spider 2000 and Pininfarina - 1979-1985 (1995cc)     Unique single rib design E- 4340 chrome-moly forged rod.  Overall, the clean, windage-reducing configuration combined with the...

Aluminum Water Pump Pulley - 1970-72

Aluminum water pump pulley FIAT 124 Spider and Sport Coupe - 1970-1972 (1438 and 1608cc)   This beautiful titanium color anodized pulley is a great replacement for a broken part, or just use to dress up the engine compartment   Not for...

Aluminum Water Pump Pulley - 1973-77

Aluminum water pump pulley FIAT 124 Spider and Sport Coupe - 1973 to early 1977   This pulley fits 1592cc and 1756cc engines with alternator on the exhaust side   This beautiful titanium color anodized pulley is a great replacement...

Aluminum Water Pump Pulley - 1977-85

Aluminum water pump pulley FIAT 124 Spider, Spider 2000 and Pininfarina - mid 1977 to 1985   This pulley fits late 1756cc engines with alternator on left (driver's) side and all 1995cc engines   This beautiful titanium color anodized...

Performance Aluminum Flywheel - 1971-78

  Performance lightweight aluminum flywheel FIAT 124 Spider and Sport Coupe - 1971 to early 78 (1608, 1592 and 1756cc)   This flywheel allows the engine to rev much faster due to its low weight Weighs only 8.5 lbs (3.9kg) compared...

Reher-Morrison High Performance Cylinder Head - 1995cc

Reher-Morrison High performance 1995cc cylinder headFIAT Spider 2000 and Pininfarina 1980-1985 - with Fuel Injection (See Note below)   This Auto Ricambi cylinder head features the following: Machined and assembled by the famed...

Stock Camshaft - New

Stock camshaft for carbureted or fuel injected engines Fiat 124 Spider, Sport Coupe, Spider 2000 and Pininfarina - 1966-1985   Can be used on intake or exhaust side - Has distributor drive gear Ground in the U.S. from European made blanks Sold...

274 Camshaft for Fuel Injected Engines

  New steel billet performance camshaft for fuel injected engines (Intake or exhaust) Fiat Spider 2000 and Pininfarina - 1980-1985   274 degree duration and 56 degrees of overlap at running clearance Works on intake or exhaust...

284 High-Performance Camshaft

New steel billet performance camshaft for carbureted or fuel injected engines (Intake or exhaust) Fiat 124 Spider, Sport Coupe, Spider 2000 and Pininfarina - 1966-1985   284 degree duration and 66 degrees of overlap at running clearances 10...

285 High-Performance Camshaft

New steel billet performance camshaft for carbureted or fuel injected engines (Intake or exhaust) Fiat 124 Spider, Sport Coupe, Spider 2000 and Pininfarina - 1966-1985   285 degree duration and 68 degrees of overlap at running clearances 9.8mm...

410 Autocross Camshaft

  New steel billet performance camshaft for highly tuned street or autocross cars (Intake or exhaust) Fiat 124 Spider, Sport Coupe, Spider 2000 and Pininfarina - 1966-1985   410 degree duration and 68 degrees of overlap at running...

430 Race Camshaft

  Performance camshaft for highly tuned autocross or full race cars - New steel billet camshaft Fiat 124 Spider, Sport Coupe, Spider 2000 and Pininfarina - 1966-1985   294 degree duration 10.9mm lift Lash clearance: Intake 0.20mm (0...

Performance Reground Intake Camshaft

  Reground intake side performance camshaft Fiat 124 Spider, Sport Coupe, Spider 2000 and Pininfarina - 1966-1985 40/80 exhaust reground camshaft 10.1mm lift, 240 degrees duration at .050" (1.25mm) clearance Lash clearance 0.012" (0...

Performance Reground Exhaust Camshaft

  Reground exhaust side performance camshaft Fiat 124 Spider, Sport Coupe, Spider 2000 and Pininfarina - 1966-1985 40/80 exhaust reground camshaft 10.1 lift, 240' duration at .050" (1.25mm) clearance Lash clearance 0.014" (0...

ABARTH Valve Cover Hold Down Set

Custom billet valve cover hold down set with ABARTH engraved on the top FIAT 124 Spider, Sport Coupe, Spider 2000 and Pininfarina - 1966-1985   Enhance the looks of the engine compartment with these custom knobs!   Add four gaskets if...

Valve Stem Height Tool

  Valve stem height tool FIAT 124 Spider, Sport Coupe, Spider 2000 and Pininfarina - 1966-1985   This tool is used to check that the valves are at the correct height after a valve job - If height exceed gauge, valve stem must be ground to...

Billet Oil Filler Cap

  Billet oil filler cap - FIAT or Scorpion style FIAT 124 Spider, Sport Coupe, Spider 2000 and Pininfarina - 1966-1985   Supplied with new seal - an excellent engine bay upgrade Choose above from two options, FIAT style or Scorpion style

High Performance Head Stud Kit

  High Performance cylinder head stud kitFIAT 124 Spider, Sport Coupe, Spider 2000 and Pininfarina - 1966-1985   A set of 10 head studs Also includes nuts and washers to replace the stock head bolts Grade 8 material, with a 1/8"...

Sport Coupe Vent Seal Set - 1967-69

Vent or wing window seal pair (left and right) FIAT 124 Sport Coupe A-Series - 1967-1969   Note: This item can be difficult to install   An exact replica made in Italy by the original manufacturer - OEM    

Rear Vent Seal - Sport Coupe 1973-75

Rubber seals for rear quarter vent windowsFIAT 124 Sport Coupe - 1973-1975   Sold as a set for both sides Molded with the correct contour Made in Italy using the original OEM molds  

OEM Hood Insulation Pad - 1979-85

OEM Hood insulation pad or linerFIAT Spider 2000, Pininfarina - 1979-1985   A new 100% original production of hood pad found on your Spider   For required retaining clips see RE2-425    

Hood Insulation Pad Clip - 1979-85

Hood insulation pad or liner clipFIAT Spider 2000, Pininfarina - 1979-1985   Used to secure the under hood insulation liner on your Spider 21 clips required per car

Vinyl Convertible Top - 1966-78

  Tan or black vinyl convertible top - Pinpoint VinylFIAT 124 Spider - 1966 to 09/1978   These tops are the best value vinyl top made for your FIAT 124 Spider.   NOTES: May also fit some early 1979 - If in doubt please...

Cloth Convertible Top - 1966-78

  Tan or black cloth convertible top - STF (Stayfast) clothFIAT 124 Spider - 1966 to 09/1978   These tops are the best value for a cloth top made for your FIAT 124 Spider.    NOTES: Resists effects of sun, weather and...

Vinyl Convertible Top - 1979-85

  Tan or black vinyl convertible top - Pinpoint VinylFIAT Spider 2000 and Pininfarina - 1966 to 10/1978-1985   These tops are the best value vinyl top made for your FIAT 124 Spider.   NOTES: May also fit some early 1979 -...

Cloth Convertible Top - 1979-85

  Tan or black cloth convertible top - STF (Stayfast) cloth FIAT Spider 2000 and Pininfarina - 1966 to 10/1978-1985   These tops are the best value for a cloth top made for your FIAT 124 Spider.    NOTES: Resists effects...

Chrome Bumper Conversion Kit

  Chrome bumper conversion kit (With rear bumpers with closed ends) FIAT 124 Spider, Spider 2000, Pininfarina - 1975-1985   Converts Spiders with the impact bumpers to the early blade style bumpers Made from stainless steel  Kit contains...

Turbo Style Mirror - Reversible

Turbo style exterior rear view mirror - ReversibleFIAT 124 Spider, Sport Coupe, Spider 2000 - 1968-1982   A faithful reproduction of a Baby-turbo Vitaloni mirror from years past Reversible - fits either side The mounting points are variable, the...

OEM Door Rubber Holder at Sill

OEM original door rubber holder at threshold sill Fiat 124 Spider, Spider 2000 and Pininfarina - 1968-1985   Holds the carpet and the door seal at the bottom of the door opening   NOS - New Old Stock, OEM Original Equipment...

Door Threshold Sill Plate End Cap

OEM original door opening / threshold sill plate end cap Fiat 124 Spider, Spider 2000 and Pininfarina - 1978-1985   NOS - New Old Stock, OEM Original Equipment Manufacturer Original to 1978on 124 Spiders but can also be used on 1966-78...

Hood Striker - 1966-78

Hood striker FIAT 124 Spider - 1966 to late 1978   For late 1978 please check your hood sticker carefully, as it may use the later style, see RE9-491  

Front Inner Fender Union - Left

Driver (left) side front inner fender union - OEM FIAT 124 Spider, Spider 2000, Pininfarina - 1966-1985   This is the part that located just inside of the front fender forward of the core support OEM original

Front Inner Fender Union - Right

Passenger (left) side front inner fender union - OEM FIAT 124 Spider, Spider 2000, Pininfarina - 1966-1985   This is the part that located just inside of the front fender forward of the core support OEM original 

Sport Coupe Hood Spring Support Bracket

Hood spring support bracket FIAT 124 Coupe - 1970-1975   Located at the top of the radiator support   Sold individually - 4 required per car  

Battery Holder - 1968-73

Battery holder or boxFIAT 124 Spider and Sport Coupe - 1968-73   Located at the right front side of the engine compartment

Rear Inner Fender Liner - Driver Side

Driver (left) side rear inner fender linerFIAT 124 Spider - 1966-1978   Made of steel, like the original

Rear Inner Fender Liner - Passenger Side

Passenger (right) side rear inner fender linerFIAT 124 Spider - 1966-1978   Made of steel, like the original

Driver Side Shock Tower Repair Panel

Driver (left) side shock tower repair panelFIAT 124 Spider, Spider 2000 and Pininfarina - 1966-1985   This is the outer layer of the shock tower