Hardware

Rear Caliper Holder to Axle Bolt - 1978-85

Rear brake caliper holder to axle boltFIAT 124 Spider, Spider 2000 and Pininfarina - 1978-1985 For 1978 models, this bolt only fits rear axles that have a cover on the rear  

Brake Rotor Locating Stud

Brake rotor locating stud or pinFIAT 124 Spider, Spider 2000 and Pininfarina - 1966-1985FIAT 124 Sport Coupe - 1967-1975FIAT and Bertone X1/9 - 1974-1988 Replace the brake disc locating studs if...

Brake Bleeder Screw

Brake caliper bleeder screwFIAT 124 Spider, Spider 2000 and Pininfarina - 1966-1985FIAT 124 Sport Coupe - 1967-1975FIAT and Bertone X1/9 - 1974-1988 Requires one per caliper

Performance Brake Speedbleeder for Wilwood Brakes

Wilwood caliper speed bleeder screw Models below IF equipped with Wilwood CalipersFIAT 124 Spider, Spider 2000 and Pininfarina - 1966-1985FIAT 124 Sport Coupe - 1967-1975FIAT and Bertone X1/9 -...

Performance Brake Speedbleeder Screw

Speed brake bleeder screwFIAT 124 Spider, Spider 2000 and Pininfarina - 1966-1985FIAT 124 Sport Coupe - 1967-1975FIAT and Bertone X1/9 - 1974-1988 Patented bleeder screw with the built-in check...

Performance Brake Stainless Steel Speedbleeder Screw

High performance stainless steel speed brake bleeder screwFIAT 124 Spider, Spider 2000 and Pininfarina - 1966-1985FIAT 124 Sport Coupe - 1967-1975FIAT and Bertone X1/9 - 1974-1988 Patented bleeder...

Brake Bleeder Dust Boot

Brake caliper bleeder screw dust boot or capFIAT 124 Spider, Spider 2000 and Pininfarina - 1966-1985FIAT 124 Sport Coupe - 1967-1975FIAT and Bertone X1/9 - 1974-1988 One required per caliper

Brake Caliper Wedge

Brake caliper wedgeFIAT 124 Spider, Spider 2000 and Pininfarina - 1966-1985FIAT 124 Sport Coupe - 1967-1975FIAT and Bertone X1/9 - 1974-1988   Each caliper requires two w

Brake Caliper Wedge Kit - Save over 10%

Brake caliper wedge kit FIAT 124 Spider, Spider 2000 and Pininfarina - 1966-1985FIAT 124 Sport Coupe - 1967-1975FIAT and Bertone X1/9 - 1974-1988  

Brake Caliper Wedge Clip

Brake caliper wedge clip set FIAT 124 Spider, Spider 2000 and Pininfarina - 1966-1985FIAT 124 Sport Coupe - 1967-1975FIAT and Bertone X1/9 - 1974-1988   Sold as a

Brake Caliper Holder Spring

Brake caliper holder spring or clipFIAT 124 Spider, Spider 2000 and Pininfarina - 1966-1985FIAT 124 Sport Coupe - 1967-1975 Snaps into caliper bracket and rests against caliper Need two per caliper

Brake Pad Spring Kit - 1968-79

Brake pad spring kitFIAT 124 Spider and Spider 2000 - 1968-1979FIAT 124 Sport Coupe - 1968-1975FIAT and Bertone X1/9 - 1974-1979 Although originally fitted to 1968-79 Spiders, these springs can be...

Brake Pad Spring Kit - 1980-on

Brake pad spring kitFIAT Spider 2000 and Pininfarina 1980-1985 (except 1985 1/2)FIAT and Bertone X1/9 - 1980-1988 Although originally fitted to 1980 and newer cars, these springs can also be used on...

Front Left Brake Dust Shield - 1972-85

Left front brake rotor dust shieldFIAT 124 Spider, Spider 2000 and Pininfarina - 1972-1985FIAT 124 Sport Coupe - 1972-1975 This NOS (New Old Stock) This shield does not fit the Pininfarina 1985.5

Front Right Brake Dust Shield - 1972-85

Right front brake rotor dust shieldFIAT 124 Spider, Spider 2000 and Pininfarina - 1972-1985FIAT 124 Sport Coupe - 1972-1975 This NOS (New Old Stock) This shield does not fit the Pininfarina 1985.5

Rear Left Brake Dust Shield - 1979-85

Driver side (left) rear brake dust shield rear portionFIAT Spider 2000 and Pininfarina - 1979-1985   This NOS (New Old Stock) shield also fits late 1978 Spiders (only for rear axle with a cover on...

Rear Right Brake Dust Shield - 1979-85

Passenger (right) rear brake dust shield rear portion FIAT Spider 2000 and Pininfarina - 1979-1985   This NOS (New Old Stock) shield also fits late 1978 Spiders (only f

Rear Brake Forward Half Dust Shield - 1966-85

Rear brake Forward Portion Dust Shield - left or right FIAT 124 Spider, Spider 2000 and Pininfarina - 1966-1985 FIAT 124 Sport Coupe - 1967-1975   This NOS (New Old Stock) po

Brake Hose Washer

Brake hose copper washerFIAT 124 Spider, Spider 2000 and Pininfarina - 1966-1985FIAT 124 Sport Coupe - 1967-1975FIAT and Bertone X1/9 - 1974-1988 2 washers required for each front hose 1 required for...

Brake Hose Lock Plate

Brake hose lock plate - bend to fitFIAT 124 Spider, Spider 2000 and Pininfarina - 1966-1985FIAT 124 Sport Coupe - 1967-1975FIAT and Bertone X1/9 - 1979-1988  Fits banjo bolts with 9/16" (14.3mm)...

Brake Hose Clip

Brake hose metal clipFIAT 124 Spider, Spider 2000 and Pininfarina - 1966-1985FIAT 124 Sport Coupe - 1967-1975FIAT and Bertone X1/9 - 1974-1988 This clip is located where the metal line and rubber...

Brake Line to Body Plastic Clip

Brake line to body plastic clip  FIAT 124 Spider, Spider 2000 and Pininfarina - 1966-1985FIAT 124 Sport Coupe - 1967-1975 FIAT and Bertone X1/9 - 1974-1988  

Left Front Metal Brake Line

Left front metal brake line FIAT 124 Spider, Spider 2000 and Pininfarina - late 1977 to 1985 Can be used on earlier Spiders and Sport Coupes to eliminate the Low Pressure Indicator Block

Fine Thread Brake Line Nut

Fine-thread metal brake line nutFIAT 124 Spider and Pininfarina - 1966-1977 and VolumexFIAT 124 Sport Coupe - 1967-1975   ONLY fits the brake junction box under the master cylinder on 1966-1977 124s...

Brake Line Nut

Metal brake line nutFIAT 124 Spider, Spider 2000 and Pininfarina - 1966-1985FIAT 124 Sport Coupe - 1967-1975FIAT and Bertone X1/9 - 1974-1988   Does not fit the brake junction box under the master cyl

Brake Hose Banjo Bolt

Brake hose banjo boltFIAT 124 Spider, Spider 2000 and Pininfarina - 1966-1985 (except Pininfarina 1985 1/2)FIAT 124 Sport Coupe - 1967-1975FIAT and Bertone X1/9 - 1979-1988 Attaches the front brake...

Brake Line T Connector

Metal brake Tee connector or splitter blockFIAT 124 Spider, Spider 2000 and Pininfarina - 1966-1985FIAT 124 Sport Coupe - 1967-1975FIAT and Bertone X1/9 - 1974-1988   On Spiders it is located on the r

Brake Master Cylinder Spout - 1966-77

Brake master cylinder inlet spoutFIAT 124 Spider and Sport Coupe - 1966 to early 1977 For 4mm ID hose

Brake Master Cylinder Spout - 1977-85

Brake master cylinder inlet spoutFIAT 124 Spider, Spider 2000 and Pininfarina - mid 1977-1985 For 7mm ID hose Note: angle may vary from picture

Brake Pedal - 1985 1/2 - Automatic

Brake pedal - with automatic transmissionPininfarina Spider - 1985 1/2 For cars with Rack and Pinion steering Will also fit earlier models New Old Stock Original FIAT part  

Brake Pedal - 1985 1/2 - 5-speed

Brake pedal - 5 SpeedPininfarina Spider - 1985 1/2 For cars with Rack and Pinion steering Will also fit earlier models New Old Stock Original FIAT part

Brake Booster Check Valve - 1976-85

Brake booster plastic check valveFIAT 124 Spider, Spider 2000 and Pininfarina 1976-1985 Fitted to the booster using rubber grommet as original

Brake Booster Check Valve Grommet - 1976-85

Brake booster check valve rubber grommetFIAT 124 Spider, Spider 2000 and Pininfarina - 1976-1985 Used to secure the check valve to the booster

Brake Booster Check Valve Banjo

Brake booster check valve banjo (valve)FIAT 124 Spider - 1966-1975 This is the valve part of the assembly

Brake Fluid Low Pressure Indicator - 1968-76

Brake fluid low pressure indicator block FIAT 124 Spider and Sport Coupe 1966 to early 1976   Up to

Brake Compensator or Regulator Boot

    Brake pressure regulator or compensator rubber bootFIAT 124 Spider, Sport Coupe, Spider 2000 and Pininfarina 1966-1985<

Brake Compensator Linkage Kit - Save 10%

Brake compensator or pressure regulator linkage and bushing kitFIAT 124 Spider, Spider 2000 and Pininfarina - 1966-1985FIAT 124 Sport Coupe - 1967-1975 Save over 10%

Brake Compensator Linkage Rod Bushing

    Brake compensator linkage rod bushingFIAT 124 Spider, Sport Coupe, Spider 2000 and Pininfarina - 1966-1985 Located where the compensator linkage connects to the rear axle

Brake Compensator Linkage Bushing at Body

Brake compensator or pressure regulator linkage bushing at bodyFIAT 124 Spider, Spider 2000 and Pininfarina - 1966-1985FIAT 124 Sport Coupe - 1967-1975 1 required per car

Brake Compensator Bushing to Body Bracket

Brake compensator or pressure regulator bushing to body bracketFIAT 124 Spider, Spider 2000 and Pininfarina - 1966-1985FIAT 124 Sport Coupe - 1967-1975  

Brake Compensator Linkage

Brake compensator or pressure regulator linkage FIAT 124 Spider, Sport Coupe, Spider 2000 and Pininfarina - 1966-1985   Connects the rod to the rear axle  

Compensator Bushing Rod Sleeve

Brake compensator or pressure regulator linkage rod bushing inner sleeve or dowelFIAT 124 Spider, Spider 2000 and Pininfarina - 1966-1985FIAT 124 Sport Coupe - 1967-1975 2 required per car

Brake Compensator Linkage Rod Plate - FIAT 124

Brake compensator or pressure regulator linkage rod plateFIAT 124 Spider, Spider 2000 and Pininfarina 1966-1985FIAT 124 Sport Coupe - 1967-1975

Brake Compensator Linkage Rod Spacer

Brake compensator or pressure regulator linkage rod spacerFIAT 124 Spider, Spider 2000 and Pininfarina - 1966-1985FIAT 124 Sport Coupe - 1967-1975 Located inside the compensator  

Brake Compensator Linkage Rod - NOS

Brake compensator linkage rod - NOSFIAT 124 Spider, Spider 2000 and Pininfarina - 1966-1985FIAT 124 Sport Coupe - 1967-1975 Sometimes missing or damaged, the brake pressure regulator actuating rod is...

Clamp for Brake Fluid Hose

Clamp for BR4-089 brake fluid hoseFIAT 124 Spider, Sport Coupe, Spider 2000 and Pininfarina - 1966-1985   12-14mm range Four required per car  For hose BR4-084 use clamp

Hand Brake Cable Union

Parking or hand brake cable unionFIAT 124 Spider, Sport Coupe, Spider 2000 and Pininfarina - 1966-1985

Handbrake Return Spring Retaining Wire

Hand brake return spring retaining wire FIAT 124 Spider, Spider 2000 and Pininfarina - 1966-1985   Handbrake return spring retaining hook

Brake Pedal Return Spring

Brake pedal return spring FIAT 124 Spider, Spider 2000 and Pininfarina - 1966-1985 FIAT 124 Sport Coupe - 1967-1975

Hand Brake Lever Handle

Parking brake handle cover FIAT 124 Spider, Sport Coupe, Spider 2000 and Pininfarina - 1966-1985