Cylinder Heads and Cams

Remanufactured Cylinder Head - 1756cc

  Remanufactured 1756cc cylinder headFIAT 124 Spider and Sport Coupe 1974-1978 (1756cc) Our Auto Ricambi remanufactured heads come complete with 4 new Italian manufacture intake valve 4 new Italian manufacture exhaust valves 8 new steel valve...

High Performance Cylinder Head - 1756cc

  High performance 1756cc cylinder headFIAT 124 Spider and Sport Coupe 1974-1978 (1756cc) This Auto Ricambi cylinder head has CNC Ported intake and exhaust ports 4 large stainless steel 43mm intake valves 4 large stainless steel 37.5mm...

Remanufactured Cylinder Head - 1995cc Carbureted

  Remanufactured 1995cc carbureted cylinder headFIAT Spider 2000, Pininfarina 1979-1980 Carbureted only Our Auto Ricambi remanufactured heads come complete with 4 new Italian manufacture intake valve 4 new Italian manufacture exhaust valves 8 new...

Remanufactured Cylinder Head - 1995cc

Remanufactured 1995cc cylinder head FIAT Spider 2000 and Pininfarina 1980-1985 - with Fuel Injected engines   Our Auto Ricambi remanufactured heads come complete with 4 new Italian manufacture intake valve 4 new Italian manufacture exhaust...

Reher-Morrison High Performance Cylinder Head - 1995cc

Reher-Morrison High performance 1995cc cylinder headFIAT Spider 2000 and Pininfarina 1980-1985 - with Fuel Injection (See Note below)   This Auto Ricambi cylinder head features the following: Machined and assembled by the famed...

Stock Camshaft - New

Stock camshaft for carbureted or fuel injected engines FIAT 124 Spider, Spider 2000 and Pininfarina - 1966-1985FIAT 124 Sport Coupe - 1967-1975   Intake or exhaust Has distributor drive gear Ground in the U.S. from European made blanks Sold...

Performance Colombo & Bariani 282 Camshaft

Colombo and Bariani 282 performance camshaftFIAT 124 Spider, Spider 2000 and Pininfarina - 1966-1980 - CarburetedFIAT 124 Sport Coupe - 1967-1975 This is a NEW cam, not reground, not welded, but made by Colombo and Bariani in Italy from NEW billet...

Performance Colombo & Bariani 294 Camshaft

Colombo and Bariani 294 performance camshaftFIAT 124 Spider, Spider 2000 and Pininfarina - 1966-1980 - CarburetedFIAT 124 Sport Coupe - 1967-1975   This is a NEW cam, not reground, not welded, but made by Colombo and Bariani in Italy from NEW billet...

274 Camshaft for Fuel Injected Engines

New steel billet performance cam shaft for fuel injected engines (intake or exhaust) Fiat Spider 2000 and Pininfarina - 1980-1985   274 degree duration and 56 degrees of overlap at running clearance Works on intake or exhaust side 9.7mm...

284 High-Performance Camshaft

New steel billet performance camshaft for carbureted or fuel injected engines (intake or exhaust) Fiat 124 Spider, Sport Coupe, Spider 2000 and Pininfarina - 1966-1985FIAT 124 Sport Coupe - 1967-1975   284 degree duration and 66 degrees of overlap...

285 High-Performance Camshaft

New steel billet performance camshaft for carbureted or fuel injected engines (intake or exhaust) FIAT 124 Spider, Spider 2000 and Pininfarina - 1966-1985 - Carbureted onlyFIAT 124 Sport Coupe - 1967-1975   285 degree duration and 68 degrees of...

410 Autocross Camshaft

New steel billet performance camshaft for highly tuned street or autocross cars (intake or exhaust) FIAT 124 Spider, Spider 2000 and Pininfarina - 1966-1985 - CarburetedFIAT 124 Sport Coupe - 1967-1975   288 degrees duration and 68 degrees of...

430 Race Camshaft

Performance camshaft for highly tuned autocross or full race cars FIAT 124 Spider, Spider 2000 and Pininfarina - 1966-1985 - CarburetedFIAT 124 Sport Coupe - 1967-1975   New steel billet camshaft 294 degree duration at running clearances 10.9mm...

Performance Reground Intake Camshaft

Reground intake side performance camshaft Fiat 124 Spider, Spider 2000 and Pininfarina - 1966-1985FIAT 124 Sport Coupe - 1967-1975   40/80 intake reground camshaft 10.1mm lift, 240 degrees duration at .050" (1.25mm) clearance Lash...

Performance Reground Exhaust Camshaft

Reground exhaust side performance camshaft Fiat 124 Spider, Spider 2000 and Pininfarina - 1966-1985FIAT 124 Sport Coupe - 1967-1975   40/80 exhaust reground camshaft 10.1 lift, 240' duration at .050" (1.25mm) clearance Lash clearance 0...

Billet Camshaft Blank

Semi-finished camshaft blank   European manufacture Made from SAE 8620 steel Sold individually  

Cylinder Head Dowel

Cylinder head alignment dowelFIAT 124 Spider, Spider 2000 and Pininfarina - 1966-1985FIAT 124 Sport Coupe - 1967-1975 Need 2 per engine  

Cylinder Head Air Injection Plug Set

Cylinder head air injection plug setFIAT 124 Spider 1974-1978 (1756cc) Plugs the four holes left when removing the air injection manifold Not for use on pollution controlled motor vehicles.

FIAT Valve Cover Hold Down Set

Custom billet valve cover hold down bolt set with FIAT engraved on the top FIAT 124 Spider, Sport Coupe, Spider 2000 and Pininfarina - 1966-1985   Supplied with gaskets and a wrench to prevent over tightening

Red Valve Cover Hold Down Bolt Set

Custom billet valve cover hold down bolt set with red FIAT text on the topFIAT 124 Spider, Sport Coupe, Spider 2000 and Pininfarina 1966-1985 Enhance the looks of the engine compartment with these custom knobs! Add four gaskets if needed, our part...

ABARTH Valve Cover Hold Down Set

Custom billet valve cover hold down set with ABARTH engraved on the top FIAT 124 Spider, Sport Coupe, Spider 2000 and Pininfarina - 1966-1985   Enhance the looks of the engine compartment with these custom knobs!   Add four gaskets if...

Valve Cover Bolt Tool

Custom billet valve cover bolt tool FIAT 124 Spider, Sport Coupe, Spider 2000 and Pininfarina - 1966-1985   Wrench for our custom billet valve cover bolts - 19mm   Does not fit stock valve cover bolts  

Blank Valve Cover Bolt Set

Custom billet valve cover hold down bolt set  FIAT 124 Spider, Sport Coupe, Spider 2000 and Pininfarina - 1966-1985   Enhance the looks of the engine compartment with these custom knobs!   Add four gaskets if needed, our part number...

Thread Insert - 8x1.25 Inside Thread

Thread insert - 8 x 1.25mm inside threads - 12 x 1.25mm outside threads - 15mm long Used to repair stripped holes, especially in cylinder heads  

Thread Insert - 6x1.0 Inside Threads

Thread insert - 6 x 1.0mm inside threads - 10 x 1.25mm outside threads - 14mm long Used to repair stripped holes, especially in cylinder heads    

Repair Stud - 8x1.25 to 10x1.50

Repair stud to replace 8mm studs   The threads on one side are 8 x 1.25mm, on the other 10 x 1.50mm   Total length 45mm, the 8mm diameter portion is 29mm long   Especially useful for repairing stripped cylinder head studs, just drill...

Remanufactured Cylinder Head - 1756cc - Imperfect

Garage sale items are parts that we have limited and non-replenishable quantities, scratch items, or New Old Stock Items.  Items are new unless otherwise stated.  There are no returns on Garage Sale items.   Remanufactured 1756cc cylinder...