Fiat 124 Spider, Sport Coupe, Spider 2000 - Carbureted
This is a NEW cam, not reground, not welded, but made by Colombo and Bariani in Italy from a NEW billet! Its hardness is independently tested. 294 degree duration, 10.3mm lift. Other modifications are necessary to get the most benefit from performance camshafts, we recommend a minimum of 9.8:1 compression ratio.
A very powerful fast road cam, timing 42-72 72-42. It can be used just on the intake side, or for the largest power increase, on both the intake and the exhaust.
All cams come with the distributor drive gear and can be used on either the intake or exhaust side. Camshaft pulley bolt torque is 87 ft-lb (118Nm).
Not for use on emission controlled motor vehicles.