Accelerator and Kickdown

Accelerator Cable - 1975-77

Accelerator cableFIAT 124 Spider and Sport Coupe 1975 to early 1977 Attaches to drum on carburetor (to engine Number 572367)

Accelerator Cable - 1977-80 Carbureted

Accelerator cableFIAT 124 Spider and Spider 2000 - 1977-1980 Attaches to bell crank linkage on cam tower (from engine Number 572367)  

Accelerator Cable - 1980-85 Injected

Accelerator cableFIAT Spider 2000 and Pininfarina 1980-1985 with Bosch fuel Injection

Accelerator Cable for IDF conversion 1966-85

Accelerator cable with built-in return spring for IDF conversionsFIAT 124 Spider, Sport Coupe 1966-1985 On 1975-1985 Spiders, these will work with the stock gas pedal, but the rubber bumper on the firewall end may be cut off From 1966 to 1974, Spiders'...

Choke or Hand Throttle Cable

Choke or hand throttle cableFIAT 124 Spider and Sport Coupe 1966-1978 Original style choke cable can also be used as replacement hand throttle cable if shortened Mounts the same way as the original - 46.5"  (118cm) overall length Use...

Choke Cable Clip

Choke or hand throttle cable clipFIAT 124 Spider and Sport Coupe 1966-1978 Fits the original choke or hand throttle cables and it will also work for our CA1-400 cable.  Holds the cable to the under dash bracket (bracket not included)

Automatic Kick Down Cable - Carbureted

    Kickdown cableFIAT Spider 2000 - 1979-1980 (automatic transmission and carburetor)

Automatic Kick Down Cable - Injected

Kickdown cableFIAT Spider 2000 and Pininfarina - 1980-1985 (automatic transmission and Bosch fuel injection) An Auto Ricambi Exclusive - Not found anywhere else!

Accelerator Metal Cable Clip - 1966-80 - NOS

Accelerator linkage and throttle cable end metal clip - NOS FIAT 124 Spider and Spider 2000 - 1966-1980FIAT 124 Sport Coupe - 1967-1974FIAT and Bertone X1/9 - 1974-1988   Holds a cable end or rod end onto the ball stud   NOS (New Old...

Accelerator Plastic Cable Clip - 1966-80

Accelerator cable end plastic clip FIAT 124 Spider, Spider 2000 - 1966-1980 (carbureted) FIAT 124 Sport Coupe - 1967-1975 FIAT and Bertone X1/9 - 1974-1988   Replaces the original metal two piece socket and clip   For the metal version, see...

Accelerator Linkage 3-Piece Rod End - 1966-80

Accelerator linkage 3-piece rod end FIAT 124 Spider and Spider 2000 - 1966-1980 (carbureted) FIAT 124 Sport Coupe - 1967-1975 FIAT and Bertone X1/9 - 1974-1988   Replaces the original metal two piece socket and clip Three piece construction: ball,...

Accelerator Linkage Rod End - 1966-80

Accelerator linkage rod endFIAT 124 Spider and Spider 2000 - 1966-1980 (carbureted)FIAT 124 Sport Coupe - 1967-1975FIAT and Bertone X1/9 - 1974-1980 (carbureted)   Replaces the original metal two piece socket and clipM5x0.80 threads

Ball End - Carburetor Accelerator Linkage

Carburetor accelerator linkage ball and socket endFIAT 124 Spider, Spider 2000 and Pininfarina - 1966-1985FIAT 124 Sport Coupe - 1967-1975FIAT and Bertone X1/9 - 1974-1988 Fits all standard FIAT linkage rods and is ideal for performance modifications 5mm...

Accelerator Linkage Ball End - 6mm

Carburetor accelerator linkage ball and socket end   Ideal for making custom throttle linkages, hood or trunk props   6 x 1.00mm thread - Larger than stock FIAT throttle linkages

Cable Linkage Adaptor

Accelerator cable to carburetor linkage adaptor   Ideal for performance modifications

Ball and Socket End - Carburetor Accelerator Linkage

Carburetor accelerator linkage ball and socket end   Attaches on the end of a cable   Used when converting 1975-1977 124 Spiders to a DFEV or 34ADF carburetor

Accelerator Pedal Return Spring - 1979on

Accelerator pedal return springFIAT Spider 2000 and Pininfarina - 1979-1985  

Universal Spring for Accelerator Linkages

Universal spring for accelerator linkages   Total length is 51mm (~2") For the holder use sku CA0-135

Barrel Nut - Accelerator Cable

Accelerator cable barrel nut Installs on cable and can be locked in place with a set screw Ideal for linkage modifications

Spring Holder for Accelerator Linkages

Universal spring holder for accelerator linkages   Center to center between the holes is 42mm (~1-5/8") 8mm hole bolts to one of the carburetor studs, while the smaller hole is for the spring For the spring, use sku CA0-120