Weatherstripping and Rubber

Cowl to Body Seal - 1966-78

Wiper cowl to body seal FIAT 124 Spider - 1966-1978   Fits under the front and side edges of the cowl  

Engine Compartment Rear Seal - 1979-85

Hood to cowl sealFIAT Spider 2000 and Pininfarina - 1979-1984 Also fits some early 1985 models without rack and pinion steering and can be used on earlier Spiders Pinches between the front of the cowl and the body.  

Sport Coupe Hood Insulation Pad - 1970-72

Hood insulation liner pad FIAT 124 Sport Coupe - 1970-1972   Black perforated vinyl with 1/2" (12mm) foam padding Does not have the holes for clips, those have to be punched  

Hood Insulation Pad Pair - 1966-78

Hood insulation liner pad FIAT 124 Spider - 1966-1978   A pair (left and right) of black perforated vinyl with 1/2" (12mm) foam padding   Most Spiders had space between the hood and its braces to tuck the insulation in-between Others had did...

OEM Hood Insulation Pad Pair - 1966-78

OEM Hood insulation liner pad set FIAT 124 Spider - 1966-1978   A pair (left and right) of black perforated vinyl with OE style batting   Most Spiders had space between the hood and its braces to tuck the insulation in-between Others had did...

Hood Insulation Pad Retainer - 1978

OEM Hood insulation liner retainer FIAT 124 Spider - 1978   Often missing these retainers help keep the hood insulation pads in place Sold individually 4 required per hood Standard hood insulation pad - RE2-414 OEM hood insulation pad -...

OEM Hood Insulation Pad - 1979-85

OEM Hood insulation pad or linerFIAT Spider 2000, Pininfarina - 1979-1985   A new 100% original production of hood pad found on your Spider   For required retaining clips see RE2-425    

Hood Insulation Pad Clip - 1979-85

Hood insulation pad or liner clipFIAT Spider 2000, Pininfarina - 1979-1985   Used to secure the under hood insulation liner on your Spider 21 clips required per car

Hood Insulation Pad Clip - Coupe

Hood insulation pad or liner clipFIAT 124 Sport Coupe - 1967-1975   Used to secure the under-hood insulation liner on your Sport Coupe 21 clips required per car

Rubber Door Weatherstrip - Sport Coupe

  Door opening rubber weatherstrip kitFIAT 124 Sport Coupe - 1966-1975 One set does both left and right door opening Imported directly from the manufacturers in Europe for an exact fit  

Hood to Cowl Seal - Sport Coupe

Engine compartment rear seal at cowl - replaces two piece seal FIAT 124 Sport Coupe - 1967-1975   Cowl to hood   Single piece replacement for the original two piece unit   For the original rubber part of the two-piece seal, order...

Engine Compartment Side Rubber - Sport Coupe

Engine compartment rear and side rubberFIAT 124 Sport Coupe - 1967-1975  

Rubber Hood and Trunk Support Kit - Sport Coupe

  Engine compartment rubber hood and trunk supports setFIAT 124 Sport Coupe AC and BC 1967-1972 Sold as a set of 6 pieces  

Expansion Body Clip for License Plate

Expansion Body clip for license plate, door sill and hood trimFIAT 124 Spider, Spider 2000 and Pininfarina - 1966-1985FIAT 124 Sport Coupe - 1967-1975 Used to mount license plate, door sill and hood trim and installs in the square holes in the body Sold...

Body Clip for Cable or Hose

Body clipFIAT 124 Spider, Spider 2000 and Pininfarina - 1966-1985FIAT 124 Sport Coupe - 1967-1975FIAT and Bertone X1/9 - 1974-1988 Commonly used on hood release cables and windshield washer hoses

Rubber Drain Plug - Large with Drain

  Large rubber floor drain plug with drain FIAT 124 Spider, Sport Coupe, Spider 2000 and Pininfarina - 1966-1985 45mm overall diameter - fits 35mm hole (approx. 1-3/8")

Rubber Drain Plug - Large

Large rubber floor drain plug and body plugFIAT 124 Spider, Spider 2000 and Pininfarina - 1966-1985FIAT 124 Sport Coupe - 1967-1975FIAT and Bertone X1/9 - 1974-1988   45mm overall diameter - fits 35mm hole

Oval Panel Plug

Large oval plugFIAT 124 Spider, Spider 2000 and Pininfarina - 1966-1985FIAT 124 Sport Coupe - 1967-1975 50 x 30mm Found in trunk of the 124 Spider or on either side of the engine compartment on the 124 Sport Coupe

Battery Cable Grommet - 1975-82

Battery cable grommetFIAT 124 Spider and Spider 2000 - 1975-1985 Found in trunk compartment and on the engine firewall where the battery cable passes through NOS Original FIAT Part

Rubber Panel Adjusting Screw

Rubber panel adjusting screwFIAT 124 Spider, Sport Coupe, Spider 2000 and Pininfarina - 1966-1985 Generally found under the windshield cowl - 50x30mm  

NOS Rectangular Firewall Grommet

Rectangular firewall rubber grommet for wiper motor harnessFIAT 124 Spider, Spider 2000 and Pininfarina - 1966-1985 FIAT 124 Sport Coupe - 1967-1975Also fits FIAT Dino Coupe and Spider   30 x 20mm Found in engine compartment NOS (new old stock) -...

Rear Battery Cable Grommet - 1975-85

Battery cable grommetFIAT 124 Spider 2000 and Pininfarina - 1975-1985 Found behind the rear seat

Transmission Tunnel Harness Grommet and Surround - NOS

Large oval panel grommet and surround set - NOSFIAT 124 Spider, Spider 2000 and Pininfarina - 1966-1985FIAT 124 Sport Coupe - 1967-1975 Found on the transmission tunnel cover - 55x40mm NOS Original New Old Stock FIAT Part

Rubber Drain Plug - Small

Small rubber floor drain plug and body plug  FIAT 124 Spider, Spider 2000 and Pininfarina - 1966-1985 FIAT 124 Sport Coupe - 1967-1975 FIAT and Bertone X1/9 - 1974-1988 30mm overall diameter - fits 20mm hole (a bit over 3/4")

Panel Plug - Large

    Replacement large panel plug and body plugFIAT 124 Spider, Sport Coupe, Spider 2000 and Pininfarina - 1966-1985 48mm rubber panel plug Fits inner door skin and radiator support

Firewall Harness Grommet & Surround - NOS

Large panel grommet and metal surround - NOSFIAT 124 Spider, Spider 2000 and Pininfarina - 1966-1985FIAT 124 Sport Coupe - 1967-1975   55 x 40mm    Found in the engine compartment where the main wiring harness passes through the...

Door Threshold Sill Plate End Cap - NOS

Door threshold sill plate end cap - NOS Fiat 124 Spider, Spider 2000 and Pininfarina - 1978-1985   NOS - New Old Stock, OEM Original Equipment Manufacturer   Original to 1978-on 124 Spiders but can also be used on earlier...

Driver Side Wheel Fender Liner - 1979-85

Driver (left) side wheel well fender liner FIAT Spider 2000 and Pininfarina - 1979-1985   Supplied in two pieces, as original, and must be riveted together   For fender liner plugs, see RS1-099

Passenger Side Fender Liner - 1979-85

Passenger (right) side wheel well fender liner FIAT Spider 2000 and Pininfarina - 1979-1985   Supplied in two pieces, as original, and must be riveted together   For fender liner plugs, see RS1-099

Fender Liner Plug - 1979-85

Fender liner plugFIAT Spider 2000 and Pininfarina - 1979-1985 Also fits our RE0-460 and RE0-461 fender liners 3 required per side Sold individually

Left Front Signal Boot - 1966-74

Driver (left) side front turn signal housing rubber boot FIAT 124 Spider - 1966-1974   This also forms the gasket between the signal housing and the body

Right Front Signal Boot - 1966-74

Passenger (right) side front turn signal housing rubber boot FIAT 124 Spider - 1966-1974This also forms the gasket between the signal housing and the body  

Transmission Inner Shifter Boot

Transmission inner shift boot(5-speed transmission)FIAT 124 Spider, Spider 2000 and Pininfarina - 1966-1985FIAT 124 Sport Coupe - 1967-1975 Replace your worn inner shift boot and help seal the heat and road noise out of the cabin

Wiper Motor Linkage to Cowl Sponge

Wiper motor and linkage to cowl rubber spacer or spongeFIAT 124 Spider, Spider 2000 and Pininfarina - 1966-1985  Secures the plastic cover above wiper motor 2 required per car