Auto Ricambi

Tensioner Bearing Holder

Tensioner bearing holder FIAT 124 Spider, Spider 2000 and Pininfarina - 1966-1985 FIAT 124 Sport Coupe - 1967-1975    

Timing Belt Tensioner Spring

Timing belt tensioner spring FIAT 124 Spider, Spider 2000 and Pininfarina - 1966-1985 FIAT 124 Sport Coupe - 1967-1975   Not a bad idea to replace this worn spring too  

Timing Belt Tensioner Spring Bolt

  Timing belt tensioner spring boltFIAT 124 Spider, Sport Coupe, Spider 2000 and Pininfarina 1966-1985 Located in the middle of the timing belt tensioner spring

Pilot Shaft Bearing - 1966-83

Pilot shaft bearingFIAT 124 Spider, Spider 2000 and Pininfarina - 1966 through 09/1983 - with 5-speed transmissionFIAT 124 Sport Coupe - 1967-1975 Located in the rear of the crankshaft It is good...

Pilot Shaft Bearing - 1983-85

Pilot shaft bearing09/1983-1985 Pininfarina Spider with 5-speed transmission Located in the rear of the crankshaft - its a good idea to replace this 32mm OD bearing at the same time as the clutch

Forged Piston Set - 1756cc and 1995cc - High Performance

Forged high-performance piston set by Traum FIAT 124 Spider, Sport Coupe, Spider 2000 and Pininfarina - 1974-1985 (1756 and 1995cc) 85mm bore 10:1 Compression ratio 37.7mm compression height (can be...

Forged Piston Set - 1608cc - High Performance

Forged high-performance piston set by Traum FIAT 124 Spider and Sport Coupe - 1971-1973 (1608cc)   80mm bore (oversize options available) Supplied with pins and clips Supplied with thin low friction...

Piston Set - 1608cc - 80.4 or 80.8mm

Piston set - 80.4mm and 80.6mm sizes availableFIAT 124 Spider and Spirt Coupe 1971-1972 (1608cc) Choose your piston size 4.50mm dome, 37.7mm compression height Approximately 9.8:1 compression...

Piston Set - 1438cc - 9.4:1 Compression Ratio

Piston set 80.0mm, 80.4mm, and 80.8mm sizesFIAT 124 Spider and Sport Coupe - 1966-1971 (1438cc) Available in 80.0mm, 80.4mm & 80.8mm oversize 4.50mm dome Approximately 9.4:1 compression...

Piston Pin Bushing - 1982-85

Piston pr wrist pin bushingFIAT Spider 2000 and Pininfarina 1982-1985 - after engine number 1515813 - (1995cc)

Piston Pin Bushing - 1971-82

Piston or wrist pin bushing FIAT 124 Spider, Sport Coupe and Spider 2000 Spider 1971-1982 - to engine number 1515812 - (1608, 1592, 1756, 1995cc)

Piston Pin

Piston or wrist pinFIAT 124 Spider, Spider 2000 and Pininfarina 1971-1985FIAT 124 Sport Coupe - 1971-1975FIAT and Bertone X1/9 - 1974-1988    

Piston Pin Clip

Piston or wrist pin clipFIAT 124 Spider, Sport Coupe, Spider 2000 and Pininfarina - 1971-1985 Sold individually

Piston Ring Set - 1498cc

Premium piston ring setFIAT X1/9 and Bertone - 1979-1988 (1498cc)   Premium rings manufactured in the USA   Note: The oil rings are an improved design which does not require sizing

Piston Set - 1300cc and 1500cc

Premium piston setFIAT X1/9 and Bertone - 1974-1988   Stock type cast pistons Choose between 86.4 or 87mm diameters Standard size for 1300cc is 86.0mm, for 1500cc is 86.4mm <

Auto Ricambi Special Forged Connecting Rod Set - 1995cc

Set of 4 Auto Ricambi Special forged 4340 steel connecting rods FIAT Spider 2000 and Pininfarina - 1979-1985 (1995cc)   Forged 4340 steel for the highest strength and durability H-beam

OEM Connecting Rod - 1979-85

Connecting rodFIAT Spider 2000 and Pininfarina - 1979-1985 (1995cc) OEM Original FIAT

Connecting Rod Nut - 1966-78

  Connecting rod nutFIAT 124 Spider and Sport Coupe 1966-1978 (1438, 1608, 1592, and 1756cc) *** NOTE *** Some manuals list the torque for the rod nuts incorrectly! The correct

Connecting Rod Bolt - 1971-78

Connecting rod boltFIAT 124 Spider and Sport Coupe 1971-78 (1608, 1592, 1756cc) *** NOTE *** Some manuals list the torque for the rod bolts incorrectly! The correct torque setting is 38 Ft-lb.

Connecting Rod Bolt - 1979-85

  Connecting rod boltFIAT Spider 2000 and Pininfarina 1979-1985 (1995cc)

Connecting Rod Nut - 1979-85

  Connecting rod nutFIAT 124 Spider and Pininfarina 1979-1985 (1995cc)  

Crankshaft Timing Belt Gear - 14mm flange

Crankshaft timing belt gear with a 14mm flangeFIAT 124 Spider - 1966-1977, up to engine number 0430996FIAT 124 Sport Coupe - 1967-1975 Replace at any sign of wear Steel gear, as original

Crankshaft Timing Belt Gear - 3mm flange

Crankshaft timing belt gear with a 3mm flange FIAT 124 Spider, Spider 2000 and Pininfarina - 1977 (from engine # 0430996) to 1985 FIAT X1/9 - 1974-1978   Replace if you

Cam Gear (Pulley) - Exhaust or Auxiliary

Exhaust cam gear - Can be also used for the auxiliary shaftFIAT 124 Spider, Sport Coupe, Spider 2000 and Pininfarina 1966-1985 This pulley has the flange on front to prevent belt travel OE FIAT...

OE Cam Gear (Pulley) - Intake

OE Intake cam timing gearFIAT 124 Spider, Sport Coupe, Spider 2000 and Pininfarina 1966-1985 This pulley has the flange on rear to prevent belt travel Original FIAT pulley - New Old Stock May have...

Cam Gear (Pulley) - Intake - FI - No flange

No flange intake cam gearFIAT 124 Spider 2000 and Pininfarina 1980-1985 with Fuel injection This item is needed for the 25mm wide performance timing belts

Degree Wheel

Timing degree wheel FIAT 124 Spider, Spider 2000 and Pininfarina - 1966-1985FIAT 124 Sport Coupe - 1967-1975   This is an all steel degree wheel, 10" (25cm) diameter with three adapters to fit...

Exhaust Valve - SOHC 1290cc

Exhaust valve FIAT X1/9 - 1974-1978 (1290cc)   31mm diameter head Highest quality Italian manufacture Sold individually

Performance Adjustable Cam Gear Set for Wide Belt

High-performance adjustable aluminum cam gear (pulley) pairFor use with wide timing belts FIAT 124 Spider, Spider 2000 and Pininfarina - 1971-1985FIAT 124 Sport Coupe - 1971-1975

Cogged Belt Water Pump / Alternator Conversion Kit

Cogged belt water pump/alternator conversion kit (For alternators on the right side of the engine)FIAT 124 Spider - 1966 to mid-1977FIAT 124 Sport Coupe - 1967-1975 Eliminates belt slip

OEM Crank Pulley - 1971 to early 1977

OEM original crankshaft pulleyFIAT 124 Spider - 1971 to early 1977 (1608cc and early 1756cc engines) FIAT 124 Sport Coupe - 1971-1975 (1608cc and early 1756cc engines)   Center ID is 29mm Engines...

Aluminum Crank Pulley - 1971 to early 1977

Aluminum crankshaft pulley FIAT 124 Spider - 1971 to early 1977 (1608cc and early 1756cc engines) FIAT 124 Sport Coupe - 1971-1975 (1608cc and early 1756cc engines)

Crank Pulley Pointer - 1979-85

Crank pulley pointer FIAT Spider 2000 and Pininfarina - 1979 to 1985 (1995cc)  

Centrifugal Oil Filter Cover - 1966-70

Centrifugal oil filter crank pulley coverFIAT 124 Spider and Sport Coupe 1966-1970 (1438cc) Replace the O-Ring each time this item is cleaned 

Water Pump Pulley - 1970-72

Water pump pulley FIAT 124 Spider - 1970-1972 (1438 and 1608cc)FIAT 124 Sport Coupe - 1970-1972 (1438 and 1608cc)   Not for early 1438cc engines with water pump mounted electro-magnetic fan

Aluminum Water Pump Pulley - 1970-72

Aluminum water pump pulley FIAT 124 Spider - 1970-1972 (1438 and 1608cc)FIAT 124 Sport Coupe - 1970-1972 (1438 and 1608cc)This beautiful titanium color anodized pulley is a great replacement for a...

Aluminum Water Pump Pulley - 1973-77

Aluminum water pump pulley FIAT 124 Spider - 1973 to early 1977FIAT 124 Sport Coupe - 1973-1975   This pulley fits 1592cc and 1756cc engines with alternator on the exhaust side

Aluminum Water Pump Pulley - 1977-85

Aluminum water pump pulley FIAT 124 Spider, Spider 2000 and Pininfarina - mid 1977 to 1985   This pulley fits late 1756cc engines with alternator on left (driver's) side and all 1995cc engines

Water Pump Pulley Bolt - 1970-85

  Water pump pulley boltFIAT 124 Spider, Sport Coupe, Spider 2000 and Pininfarina - 1970-1985 Three washers required per pulley For water pump lock washer see 

Long Water Pump Pulley Bolt - 1970-85

Long water pump pulley bolt for aluminum pulleys FIAT 124 Spider, Sport Coupe, Spider 2000 and Pininfarina - 1970-1985   For our aluminum water pump pulleys only  

8mm Washer - Water Pump Pulley

8mm lock washer for the water pump pulleyFIAT 124 Spider, Sport Coupe, Spider 2000 and Pininfarina - 1970-1985 This is a 8mm washer, will work for any 8mm nut or bolt Three washers required per water...

Ring Gear for Flywheel - 1971-85

Flywheel ring gear FIAT 124 Spider, Spider 2000 and Pininfarina - 1971-1985 (1608, 1756, 1995cc)FIAT 124 Sport Coupe - 1971-1975 (1608, 1756cc)   This new ring-gear has 134 teeth  

Ring Gear for Flywheel - 1966-70

Flywheel ring gear FIAT 124 Spider - 1966-1970 (1438cc)FIAT 124 Sport Coupe - 1967-1970 (1438cc)   This new ring-gear has 129 teeth  

Flywheel Dowel Pin

Flywheel dowel pin - manual transmissionFIAT 124 Spider, Spider 2000 and Pininfarina - 1966-1985FIAT 124 Sport Coupe - 1967-1975FIAT and Bertone X1/9 - 1974-1988 Positions pressure plate on...

Cylinder Head Gasket - 1974-85

Cylinder head to block gasketFIAT 124, Sport Coupe, Spider 2000, Pininfarina and 1974-1985 (1756cc and 1995cc) Manufactured in Italy to the highest standards and specifically for your Fiat 124

Cylinder Head Gasket - Thick - 1974-85

      Cylinder head to block gasket - 1.9mm thickFIAT 124 Spider, Sport Coupe, Spider 2000, Pininfarina 1974-1985 (1756cc and 1995cc) Lowers compression ratio by approxi

Cylinder Head Gasket - Thin for higher compression - 1974-85

Cylinder head gasket - 1.2mm thickFIAT 124 Spider, Sport Coupe, Spider 2000, Pininfarina - 1974-1985 (1756cc and 1995cc) Increases compression ratio by approximately 0.2 points (If the compression...

US Made MLS Head Gasket - 1974-85 - 1.5mm - 86mm

Head gasket by Cleveland Gaskets (manufactured by Cometic in the USA) High-Performance multi-layer steel (MLS) design FIAT 124 Spider, Spider 2000 and Pininfarina - 1974-1985 (1756 and 1995cc)FIAT...

Intake Manifold Spacer Gasket

Phenolic intake manifold spacer gasket with no cooling holesFIAT 124 Spider, Spider 2000 and Pininfarina - 1966-1985 (except 1979-1980 carbureted)FIAT 124 Sport Coupe - 1967-1975 Insulating spacer,...

Paper Thermostat Housing to Head Gasket

Coolant thermostat housing or water outlet to head paper gasketFIAT 124 Spider, Sport Coupe, Spider 2000 and Pininfarina - 1966-1985 This is an aftermarket gasket designed to seal the coolant outlet...

Fuel Pump Gasket - X1/9 - Block Side

Fuel pump gasket, block sideFIAT and Bertone X1/9 - 1974-1980   Between the engine block and the isolator Standard thickness High-quality Italian manufacturer Non-asbestos For the fuel pump side...

Thermostat Housing Gasket - X1/9 1977-80

Thermostat housing gasketFIAT and Bertone X1/9 - 1977-1980 (carbureted)   High quality Italian manufacturer For carbureted models with EGR Non-asbestos