Auto Ricambi

Oil Filter Housing Gasket - 1966-77

Oil filter housing to block gasketFIAT 124 Spider and Sport Coupe - 1966-1977 (1438, 1608, 1592 and early 1756cc) Manufactured in Italy to the highest standards and specifically for your Fiat...

Oil Filter Housing Gasket - 1978-85

Oil filter housing to block gasketFIAT Spider 2000 and Pininfarina 1978-1985 (late 1756 and 1995cc) Manufactured in Italy to the highest standards and specifically for your Fiat 124 NOTE: From engine...

Throttle Heater Gasket - 1980-85

Throttle heater gasketFIAT Spider 2000 and Pininfarina with Fuel injection - 04/1980-1985 Made to the highest standards and specifically for your engine  

Intake Plenum Gasket

Intake plenum box gasketFIAT Spider 2000 and Pininfarina 1980-1985 (with Bosch fuel injection) Manufactured in Italy to the highest standards and specifically for your Fiat 124

Cam and Auxiliary Shaft Oil Seal

Cam and auxiliary shaft oil sealFIAT 124 Spider, Spider 2000 and Pininfarina - 1966-1985FIAT 124 Sport Coupe - 1967-1975FIAT and Bertone X1/9 - 1974-1988  

Rear Crankshaft Seal - 1976-85

      Rear crank shaft oil sealFIAT 124 Spider, Spider 2000 and Pininfarina - 1976-1985 74mm ID Fits from engine number 430595 onward

Rear Crankshaft Seal - 1966-76

Rear crank shaft oil seal FIAT 124 Spider and Sport Coupe - 1966-1976 70mm ID Fits to engine number 430594

Performance Valve Seal Set

High performance valve guide seal setFIAT 124 Spider, Spider 2000 and Pininfarina - 1966-1985FIAT 124 Sport Coupe - 1967-1975FIAT and Bertone X1/9 - 1974-1988   A complete set of 8 Viton seals...

Centrifugal Oil Filter Cover O-Ring - 1438cc

Centrifugal oil filter cover O-RingFIAT 124 Spider and Sport Coupe - 1966-1970 (1438cc)

Remanufactured Cylinder Head - 1756cc

Remanufactured 1756cc cylinder headFIAT 124 Spider and Sport Coupe 1974-1978 (1756cc) Our Auto Ricambi remanufactured heads come complete with 4 new Italian manufacture intake valve 4 new Italian...

High Performance Cylinder Head - 1756cc

  High performance 1756cc cylinder headFIAT 124 Spider and Sport Coupe 1974-1978 (1756cc) This Auto Ricambi cylinder head has CNC Ported intake and exhaust ports 4 large stainless steel 43mm...

Remanufactured Cylinder Head - 1995cc Carbureted

Remanufactured 1995cc carbureted cylinder headFIAT Spider 2000, Pininfarina 1979-1980 Carbureted only Our Auto Ricambi remanufactured heads come complete with 4 new Italian manufacture intake...

Remanufactured Cylinder Head - 1995cc

Remanufactured 1995cc cylinder head FIAT Spider 2000 and Pininfarina 1980-1985 - with Fuel Injected engines   Our Auto Ricambi remanufactured heads come complete with: 4 new Italian...

Remanufactured Cylinder Head - 1995cc - Imperfect

Garage sale items are parts that we have limited and non-replenishable quantities, scratch items, or New Old Stock Items.  Items are new unless otherwise stated.  There are no returns on...

Reher-Morrison High Performance Cylinder Head - 1995cc

Reher-Morrison High performance 1995cc cylinder headFIAT Spider 2000 and Pininfarina 1980-1985 - with Fuel Injection (See Note below)   This Auto Ricambi cylinder head features the...

High Performance Cylinder Head - 1995cc

High performance 1995cc cylinder headFIAT Spider 2000 and Pininfarina 1980-1985 - with Fuel Injection (See Note below) This Auto Ricambi cylinder head has CNC Ported intake and exhaust 4...

Stock Camshaft - New

Stock camshaft for carbureted or fuel injected engines FIAT 124 Spider, Spider 2000 and Pininfarina - 1966-1985FIAT 124 Sport Coupe - 1967-1975   Intake or exhaust Has distributor drive...

274 Camshaft for Fuel Injected Engines

New steel billet performance cam shaft for fuel injected engines (intake or exhaust) Fiat Spider 2000 and Pininfarina - 1980-1985   282 degree duration and 66 degrees of overlap at running...

284 High-Performance Camshaft

New steel billet performance camshaft for carbureted or fuel injected engines (intake or exhaust) Fiat 124 Spider, Sport Coupe, Spider 2000 and Pininfarina - 1966-1985FIAT 124 Sport Coupe -...

285 High-Performance Camshaft

New steel billet performance camshaft for carbureted or fuel injected engines (intake or exhaust) FIAT 124 Spider, Spider 2000 and Pininfarina - 1966-1985 - Carbureted onlyFIAT 124 Sport Coupe -...

410 Autocross Camshaft

New steel billet performance camshaft for highly tuned street or autocross cars (intake or exhaust) FIAT 124 Spider, Spider 2000 and Pininfarina - 1966-1985 - CarburetedFIAT 124 Sport Coupe -...

430 Race Camshaft

Performance camshaft for highly tuned autocross or full race cars FIAT 124 Spider, Spider 2000 and Pininfarina - 1966-1985 - CarburetedFIAT 124 Sport Coupe - 1967-1975   New steel billet...

Performance Reground Intake Camshaft

Reground intake side performance camshaft Fiat 124 Spider, Spider 2000 and Pininfarina - 1966-1985FIAT 124 Sport Coupe - 1967-1975   40/80 intake reground camshaft 10.1mm lift, 240...

Performance Reground Exhaust Camshaft

Reground exhaust side performance camshaft Fiat 124 Spider, Spider 2000 and Pininfarina - 1966-1985FIAT 124 Sport Coupe - 1967-1975   40/80 exhaust reground camshaft 10.1 lift, 240'...

Billet Camshaft Blank

Semi-finished camshaft blank   European manufacture Made from SAE 8620 steel Sold individually  

Cylinder Head Dowel

Cylinder head alignment dowelFIAT 124 Spider, Spider 2000 and Pininfarina - 1966-1985FIAT 124 Sport Coupe - 1967-1975 Need 2 per engine  

Cylinder Head Air Injection Plug Set

Cylinder head air injection plug setFIAT 124 Spider 1974-1978 (1756cc) Plugs the four holes left when removing the air injection manifold Not for use on pollution controlled motor vehicles.

Valve Stem Height Tool

Valve stem height tool FIAT 124 Spider, Spider 2000 and Pininfarina - 1966-1985FIAT 124 Sport Coupe - 1967-1975   This tool is used to check that the valves are at the correct height after a...

Valve Adjusting Tool

Valve shim adjusting toolFIAT 124 Spider, Spider 2000 and Pininfarina - 1966-1985FIAT 124 Sport Coupe - 1967-1975   This tool is used to hold down the shim bucket while the shim is...

Valve Shim Kit

Valve shim set FIAT 124 Spider, Spider 2000 and Pininfarina - 1966-1985FIAT 124 Sport Coupe - 1967-1975FIAT and Bertone X1/9 - 1974-1988   Our Italian manufactured valve clearance adjusting shim...

Tappet - Cam Follower

Shim bucket (Tappet or cam follower) FIAT 124 Spider, Spider 2000 and Pininfarina - 1966-1985FIAT 124 Sport Coupe - 1967-1975FIAT and Bertone X1/9 - 1974-1988  

Top Hat Shim or Lash Cap

Top hat shim FIAT 124 Spider, Spider 2000 and Pininfarina - 1966-1985FIAT 124 Sport Coupe - 1967-1975FIAT and Bertone X1/9 - 1974-1988   This shim is used when valve clearance is too large to...

Valve Shims

Valve shim - Choose sizes neededFIAT 124 Spider, Spider 2000 and Pininfarina - 1966-1985FIAT 124 Sport Coupe - 1967-1975FIAT and Bertone X1/9 - 1974-1988 Keep your 124 Spider running smoothly by...

Intake Valve

  Intake valveFIAT 124 Spider, Sport Coupe, Spider 2000 and Pininfarina 1966-1985 Made in Italy Sold each

Exhaust Valve

      Exhaust valveFIAT 124 Spider, Sport Coupe, Spider 2000 and Pininfarina - 1966-1985 Made in Italy Sold each  

AR Special High Performance Exhaust Valve Set

Auto Ricambi Special high-performance stainless steel exhaust valve set FIAT 124 Spider, Sport Coupe, Spider 2000, and Pininfarina 1966-1985   The Auto Ricambi stainless steel exhaust valves...

AR Special High Performance Intake Valve Set

Auto Ricambi Special high-performance stainless steel intake valve set FIAT 124 Spider, Sport Coupe, Spider 2000, and Pininfarina 1966-1985   The Auto Ricambi stainless steel intake valves were...

High Performance Exhaust Valve - 37.5mm

High performance stainless steel exhaust valve FIAT 124 Spider, Sport Coupe, Spider 2000 and Pininfarina 1966-1985   Our Auto Ricambi stainless steel exhaust valves were specifically designed...

High Performance Intake Valve - 43mm

High performance stainless steel intake valve FIAT 124 Spider, Sport Coupe, Spider 2000 and Pininfarina 1966-1985   Our Auto Ricambi stainless steel intake valves were specifically designed...

High Performance Intake Valve - 43.5mm

  High performance stainless steel intake valveFIAT 124 Spider, Sport Coupe, Spider 2000 and Pininfarina 1966-1985 Our Auto Ricambi stainless steel intake valves were specifically designed...

Stock Cast Iron Valve Guide - 1966-78

Stock cast iron valve guide FIAT 124 Spider and Sport Coupe - 1966-1978   These guides have an outside diameter of 15mm Up to engine no. 0554875 Sold individually Note: Late 1978 cylinder...

Oversize Cast Iron Valve Guide - 1966-78

Stock cast iron valve guide - 0.05mm oversize FIAT 124 Spider - 1966-1978 FIAT 124 Sport Coupe - 1967-1975   These guides have an outside diameter of 15.05mm Up to engine no. 0554875 Sold...

Performance Bronze Valve Guide - 1966-78

High performance bronze valve guideFIAT 124 Spider and Sport Coupe - 1966-1978   These performance bronze guides have an outside diameter of 15mm Up to engine no. 0554875 Sold...

Oversize Performance Bronze Valve Guide - 1966-78

Oversize high performance bronze valve guide FIAT 124 Spider and Sport Coupe - 1966-1978   These oversized bronze guides have an outside diameter of 15.12mm outer diameter  - 0.12mm...

Stock Cast Iron Valve Guide - 1978-85

Stock cast iron valve guide FIAT 124 Spider, Spider 2000 and Pininfarina - 1978-1985FIAT and Bertone X1/9 - 1979-1988 (3mm shorter than stock)   These guides have an outside diameter of...

Oversize Cast Iron Valve Guide - 1978-85

Oversized cast iron valve guide FIAT 124 Spider, Spider 2000 and Pininfarina - 1978-1985   Choose the correct guide size for your application Available with an outside diameter of 14.05mm or...

Performance Bronze Valve Guide - 1978-85

High Performance bronze valve guide FIAT 124 Spider, Spider 2000 and Pininfarina - 1978-1985 FIAT and Bertone X1/9 - 1979-1988 (3mm shorter than stock)   These performance bronze guides...

Oversize Performance Bronze Valve Guide - 1978-85

Oversized High Performance bronze valve guide FIAT 124 Spider, Spider 2000 and Pininfarina - 1978-1985    These performance bronze guides have an outside diameter of 14.09mm Sold...

Valve Spring Keeper

Valve spring keeperFIAT 124 Spider, Spider 2000 and Pininfarina - 1966-1985FIAT 124 Sport Coupe - 1967-1975FIAT and Bertone X1/9 - 1974-1988   2 required per valve or 16 per engine   Sold...

Oil Pan Guard - 1979-85

Oil pan guardFIAT 124 Spider and Pininfarina - 1979-1985 Protects the oil pan from damage which can be caused by 'bottoming out'. This rugged sump guard can prevent hundreds of dollars in costly...

Oil Pan Guard L-bracket

Oil pan guard L-bracketFIAT 124 Spider, Spider 2000 and Pininfarina - 1966-1985FIAT 124 Sport Coupe - 1967-1975  Two needed to install the oil pan guard on a 1966-1978 FIAT 124 Bolts not included

OEM Original Oil Pan - 1966-71

OEM original oil panFIAT 124 Spider - 1966-1971 (1438cc)FIAT 124 Sport Coupe - 1967-1971 (1438cc) OEM - Factory original pan with factory baffle NOS - New Old Stock For gasket see GA1-470