Auto Ricambi

Oil Pump - 1979-85

Oil pumpFIAT Spider 2000 and Pininfarina - 1979-1985 (1995cc) For gasket see GA1-456

Oil Pump Drive Gear Bushing

Oil pump drive gear bushingFIAT 124 Spider, Spider 2000 and Pininfarina - 1966-1985FIAT Sport Coupe - 1967-1975FIAT and Bertone X1/9 - 1974-1988 Presses into the engine block and holds the oil pump...

Oil Pump Drive Gear - 1966-78

      Oil pump drive gearFIAT 124 Spider and Sport Coupe - 1966-1978 to Spares Number 1523287 48mm overall height

OEM Oil Pump Drive Gear - 1979-85

Oil pump drive gear - Original FIAT part FIAT Spider 2000 and Pininfarina - 1979-1985 from Spares number 1523288   Original New Old Stock FIAT part 57.5mm overall height

Oil Pump Drive Gear - 1979-85

Oil pump drive gearFIAT Spider 2000 and Pininfarina - 1979-1985 from Spares Number 1523288 57.5mm overall height For the original FIAT version, please see LU6-499-OE

High Performance Oil Sending Unit Adaptor

  Oil sender T bolt and banjo doublerFIAT 124 Spider, Spider 2000 and Pininfarina - 1966-1985 FIAT 124 Sport Coupe - 1967-1975 FIAT and Bertone X1/9 - 1974-1988   Allows the use of 2...

Oil Filter Housing - Early

Oil filter housingFIAT 124 Spider - 1966 to early 1977 FIAT 124 Sport Coupe - 1967-1975   Used on 124s with the alternator on the passenger side   Must also install LU0-400-Z to use both...

Long Hose Crank Case Ventilation - 1966-80

Long crank case breather hoseFIAT 124 Spider and Spider 2000 - 1966-1980 (carbureted)FIAT 124 Sport Coupe - 1967-1975   This is a properly formed hose for your 124 application - reproduced...

Long Hose Crank Case Ventilation - 1980-85

Long crank case breather hoseFIAT Spider 2000 and Pininfarina - 1980-1985 (with Bosch fuel injection) This is a properly formed hose for your 124 application - reproduced specifically for Auto...

Short Hose Crank Case Ventilation - 1966-73

Short crank case breather hoseFIAT 124 Spider and Sport Coupe (1438 & 1608cc) - 1966-1973FIAT 124 Sport Coupe (1438 & 1608cc) - 1967-1973 To install this, the oil-vapor separator will have to...

Short Hose Crank Case Ventilation - 1973-77

Short crank case breather hoseFIAT 124 Spider - 1973-1977FIAT 124 Sport Coupe - 1973-1975 One side has an ID of ~16mm, the other side ~14.5mm To install this the oil/vapor separator will have to be...

Short Crank Case Ventilation Hose - 1977-78

Short crank case breather hoseFIAT 124 Spider - late 1977 to 1978 (1756cc)   Upper end is larger diameter (7/8 inch, 22mm)   To install this the oil/vapor separator will have to be removed...

Short Hose Crank Case Ventilation - 1979-85

Short crank case breather hoseFIAT Spider 2000 and Pininfarina - 1979-1985 To install this, the oil/vapor separator will have to be removed - use gasket part number GA1-450 This is a properly formed...

Flame Trap

Flame trap or spark arrestorFIAT 124 Spider, Spider 2000 and Pininfarina - 1966-1985FIAT 124 Sport Coupe - 1967-1975FIAT and Bertone X1/9 - 1974-1988 Installs in the air cleaner end of the long...

Oil Filler Cap

Oil filler capFIAT 124 Spider, Spider 2000 and Pininfarina - 1966-1985FIAT 124 Sport Coupe - 1967-1975FIAT and Bertone X1/9 - 1974-1988 Supplied complete with new seal

Oil Filler Cap Gasket

Oil filler cap rubber gasketFIAT 124 Spider, Spider 2000 and Pininfarina - 1966-1985FIAT 124 Sport Coupe - 1967-75FIAT and Bertone X1/9 - 1974-1988

Lower Dipstick Tube Seal - 1979-85

Lower dipstick tube to block seal FIAT Spider 2000 and Pininfarina - 1979-1985   Located between the base of dip stick tube and the engine block   Auto Ricambi Exclusive  

Dipstick - 1979-85

Engine oil dipstickFIAT Spider 2000 and Pininfarina - 1979-1985 Requires a new mark be applied  For the tube please see item LU4-580

Temperature Gauge Sender

Coolant temperature sending unitFIAT 124 Spider, Spider 2000 and Pininfarina - 1966-1985FIAT 124 Sport Coupe - 1967-1975FIAT and Bertone X1/9 - 1974-1978 On the 124 this sender is located in the...

X1/9 Temperature Gauge Sender

Coolant temperature sending unitFIAT and Bertone X1/9 - 1979-1988 Controls the gauge reading

Temperature Gauge Switch

Coolant temperature switch or senderFIAT 124 Spider, Spider 2000 and Pininfarina - 1966-1985FIAT 124 Sport Coupe - 1967-1975 On the 124 this switch is located in the cylinder head - either between...

Sending Unit Boot

Sending unit bootFIAT 124 Spider, Spider 2000 and Pininfarina - 1966-1985FIAT 124 Sport Coupe - 1967-1975FIAT and Bertone X1/9 - 1974-1988 Fits most FIAT coolant and oil pressure sending units

Oil Pressure Light Sending Unit

Oil pressure light sending unit (switch)FIAT 124 Spider, Spider 2000 and Pininfarina - 1966-1985FIAT 124 Sport Coupe - 1967-1975FIAT and Bertone X1/9 - 1974-1988 Controls the low pressure warning...

Oil Pressure Gauge Sending Unit Boot

Oil pressure gauge sending unit bootFIAT 124 Spider, Spider 2000 and Pininfarina - 1966-1985FIAT 124 Sport Coupe - 1967-1975FIAT and Bertone X1/9 - 1974-1988   Fits the oil pressure...

Oil Gauge Sending Unit

Oil pressure gauge sending unitFIAT 124 Spider, Spider 2000 and Pininfarina - 1966-1985 FIAT 124 Sport Coupe - 1967-1975 FIAT and Bertone X1/9 - 1974-1978   Controls the gauge level...

Oil Gauge Sending Unit - 1983-85

Oil pressure level sending unitFIAT Spider Pininfarina - 1983-1985FIAT X1/9 - 1974-1978 Controls the gauge level - Sender with wire pigtail

Motor Mount - 1966-74

Complete engine motor mount assemblyFIAT 124 Spider - 1966-1974FIAT 124 Sport Coupe - 1967-1974 This accordion-style mount comes complete with the spring and top assembly    

Motor Mount - 1974-85

Engine motor mountFIAT 124 Spider, Spider 2000 and Pininfarina - 1974-1985FIAT 124 Sport Coupe - 1974-1975 New solid-style motor mount Can also be used on earlier models

Lowering Motor Mount - 1966-85

Lower or short engine motor mount FIAT 124 Spider, Spider 2000 and Pininfarina - 1966-1985FIAT 124 Sport Coupe - 1967-1975   Used when installing 1995cc motor in an earlier 124...

Freeze Plug Kit

    Freeze plug kitFIAT 124 Spider, Sport Coupe, Spider 2000 and Pininfarina 1966-1985 Kit includes 5 freeze plugs

Engine Galley Plug - 24mm

24mm crank case galley plugFIAT 124 Spider, Sport Coupe, Spider 2000 and Pininfarina - 1966-1985 Located on the front of block  

Engine Oil Galley Plug - 16mm

    Engine block oil galley plug FIAT 124 Spider, Sport Coupe, Spider 2000 and Pininfarina - 1966-1985 16mm - Need 2 or 3 per engine, depending on engine size - Please check...

Engine Oil Galley Plug - 18mm

18mm engine block oil galley plugFIAT 124 Spider, Sport Coupe, Spider 2000 and Pininfarina - 1966-1985 18mm - Located on the front of the engine

Crank Shaft Galley Plug - 10mm

Engine crank shaft oil galley plugFIAT 124 Spider, Spider 2000 and Pininfarina - 1966-1985FIAT 124 Sport Coupe - 1967-1975FIAT and Bertone X1/9 - 1974-1988 10mm   Four required per crankshaft

Crankshaft Woodruff Key

Crankshaft woodruff key or keywayFIAT 124 Spider, Sport Coupe, Spider 2000 and Pininfarina - 1966-1985

Engine Coolant Drain Plug

Block coolant drain plugFIAT 124 Spider, Sport Coupe, Spider 2000 and Pininfarina 1966-1985 Located on the exhaust side of the block

Auxiliary Shaft Seal Cover

Auxiliary shaft seal cover FIAT 124 Spider, Sport Coupe, Spider 2000 and Pininfarina - 1966-1985  

Short engine to bell housing bolt - 1971-85

  Short or upper engine to transmission bell housing boltFIAT 124 Spider, Sport Coupe, Spider 2000 and Pininfarina - 1971-1985 Requires two per car

Long engine to bell housing bolt - 1971-85

    Long or lower engine to transmission bell housing boltFIAT 124 Spider, Sport Coupe, Spider 2000 and Pininfarina - 1971-1985 Requires two per car

Flywheel Bolt - 10mm

Flywheel boltFIAT 124 Spider - 1966-1977FIAT 124 Sport Coupe - 1967-1977FIAT and Bertone X1/9 - 1974-1988 10mm diameter To engine number 0430996 - For later engines use EN5-071-Z Sold each

High Performance Flywheel Bolt Set - 1976-85

Ultra high performance ARP flywheel bolt setFIAT 124 Spider, Spider 2000 and Pininfarina 1976-1985 The set includes 6 ARP 12mm diameter bolts For 1800 engines from engine number 0430996 - For earlier...

Crankshaft Nut - 1971-83

Crankshaft Nut - 38 mmFIAT 124 Spider, Spider 2000 and Pininfarina - 1971-1983FIAT 124 Sport Coupe - 1971-1975

Crankshaft Bolt - 1983-85

Crankshaft pulley boltFIAT Pininfarina Spider - 1983-1985 Left hand thread

Cylinder Head Bolts Set - SAVE 10%

    Cylinder head bolts set of 10FIAT 124 Spider, Sport Coupe, Spider 2000 and Pininfarina - 1966-1985 Each engine requires 10 bolts - sold as a set Add new OEM head bolt washers...

Cylinder Head Bolt

Cylinder head boltFIAT 124 Spider, Sport Coupe, Spider 2000 and Pininfarina - 1966-1985 Each engine requires 10 bolts

Cylinder Head Bolt Washer - OEM Original

    Cylinder head bolt washerFIAT 124 Spider, Sport Coupe, Spider 2000 and Pininfarina 1966-1985 Each engine requires 10 bolts OEM Original Fiat part   Approved for use in...

Ribe Cylinder Head Bolt Set

Cylinder head bolt set (ten bolts)FIAT 124 Spider, Sport Coupe, Spider 2000 and Pininfarina 1966-1985   As found on the Pininfarina & Volumex Spider Complete set of 10 Ribe head bolts Ribe...

Cylinder Head Bolt Tool - Ribe 12

  Cylinder head bolt toolFor use with FIAT 124 Spider, Sport Coupe, Spider 2000 and Pininfarina 1966-1985 For use with our EN5-468 Ribe 12 Head Bolt Kit Durable and made in the...

Center Muffler - Spider 1966-78

  Center muffler with two resonators FIAT 124 Spider 1966-1978 (without catalytic converter) For 1974-1978 California models with a catalytic converter use EX7-483 Use clamp...

Performance Center Muffler - Spider 1966-78

      Large diameter center muffler with one resonatorFIAT 124 Spider 1966-1978 (without catalytic converter) Featuring a 50mm (~2") diameter - this is an easy way to improve the...

Center Muffler - 1974-80 - Carbureted with Catalytic Converter

Center muffler or resonatorFIAT Spider 2000 1979-1980 (carbureted)FIAT 124 Spider 1974-1978 (California models with catalytic converter) 3 bolt flange

Center Muffler - 1980-85 with Fuel Injected

Center muffler or resonatorFIAT Spider 2000 and Pininfarina 1980-1985 (fuel injected) 4 bolt flange