Auto Ricambi

Dipstick - 1979-85

Engine oil dipstickFIAT Spider 2000 and Pininfarina - 1979-1985 Requires a new mark be applied  For the tube please see item LU4-580

Temperature Gauge Sender

Coolant temperature sending unitFIAT 124 Spider, Spider 2000 and Pininfarina - 1966-1985FIAT 124 Sport Coupe - 1967-1975FIAT and Bertone X1/9 - 1974-1978 On the 124 this sender is located in the...

X1/9 Temperature Gauge Sender

Coolant temperature sending unitFIAT and Bertone X1/9 - 1979-1988 Controls the gauge reading

Temperature Gauge Switch

Coolant temperature switch or senderFIAT 124 Spider, Spider 2000 and Pininfarina - 1966-1985FIAT 124 Sport Coupe - 1967-1975 On the 124 this switch is located in the cylinder head - either between...

Sending Unit Boot

Sending unit bootFIAT 124 Spider, Spider 2000 and Pininfarina - 1966-1985FIAT 124 Sport Coupe - 1967-1975FIAT and Bertone X1/9 - 1974-1988 Fits most FIAT coolant and oil pressure sending units

Oil Pressure Light Sending Unit

Oil pressure light sending unit (switch)FIAT 124 Spider, Spider 2000 and Pininfarina - 1966-1985FIAT 124 Sport Coupe - 1967-1975FIAT and Bertone X1/9 - 1974-1988 Controls the low pressure warning...

Oil Temperature Sending Unit

Oil temperature sending unit for Veglia gaugesFIAT 124 Spider, Spider 2000 and Pininfarina - 1966-1985FIAT 124 Sport Coupe - 1967-1975FIAT and Bertone X1/9 - 1974-1988 Has 14x1.5mm threads, same as...

Oil Pressure Gauge Sending Unit Boot

Oil pressure gauge sending unit bootFIAT 124 Spider, Spider 2000 and Pininfarina - 1966-1985FIAT 124 Sport Coupe - 1967-1975FIAT and Bertone X1/9 - 1974-1988   Fits the oil pressure...

Oil Gauge Sending Unit

Oil pressure gauge sending unitFIAT 124 Spider, Spider 2000 and Pininfarina - 1966-1985 FIAT 124 Sport Coupe - 1967-1975 FIAT and Bertone X1/9 - 1974-1978   Controls the gauge level...

Oil Gauge Sending Unit - 1983-85

Oil pressure level sending unitFIAT Spider Pininfarina - 1983-1985FIAT X1/9 - 1974-1978 Controls the gauge level - Sender with wire pigtail

Motor Mount - 1966-74

Complete engine motor mount assemblyFIAT 124 Spider - 1966-1974FIAT 124 Sport Coupe - 1967-1974 This accordion-style mount comes complete with the spring and top assembly Sold individually  

Motor Mount - 1974-85

Engine motor mountFIAT 124 Spider, Spider 2000 and Pininfarina - 1974-1985FIAT 124 Sport Coupe - 1974-1975 New solid-style motor mount Can also be used on earlier models Sold individually

Lowering Motor Mount - 1966-85

Lower or short engine motor mount FIAT 124 Spider, Spider 2000 and Pininfarina - 1966-1985FIAT 124 Sport Coupe - 1967-1975   Used when installing 1995cc motor in an earlier 124 Spider These...

Freeze Plug Kit

    Freeze plug kitFIAT 124 Spider, Sport Coupe, Spider 2000 and Pininfarina 1966-1985 Kit includes 5 freeze plugs

Engine Galley Plug - 24mm

24mm crank case galley plugFIAT 124 Spider, Sport Coupe, Spider 2000 and Pininfarina - 1966-1985 Located on the front of block  

Engine Oil Galley Plug - 16mm

    Engine block oil galley plug FIAT 124 Spider, Sport Coupe, Spider 2000 and Pininfarina - 1966-1985 16mm - Need 2 or 3 per engine, depending on engine size - Please check...

Engine Oil Galley Plug - 18mm

18mm engine block oil galley plugFIAT 124 Spider, Sport Coupe, Spider 2000 and Pininfarina - 1966-1985 18mm - Located on the front of the engine

Crank Shaft Galley Plug - 10mm

Engine crank shaft oil galley plugFIAT 124 Spider, Spider 2000 and Pininfarina - 1966-1985FIAT 124 Sport Coupe - 1967-1975FIAT and Bertone X1/9 - 1974-1988 10mm   Four required per crankshaft

Crankshaft Woodruff Key

Crankshaft woodruff key or keywayFIAT 124 Spider, Sport Coupe, Spider 2000 and Pininfarina - 1966-1985

Engine Coolant Drain Plug

Block coolant drain plugFIAT 124 Spider, Sport Coupe, Spider 2000 and Pininfarina 1966-1985 Located on the exhaust side of the block

Auxiliary Shaft Seal Cover

Auxiliary shaft seal cover FIAT 124 Spider, Sport Coupe, Spider 2000 and Pininfarina - 1966-1985  

Short engine to bell housing bolt - 1971-85

  Short or upper engine to transmission bell housing boltFIAT 124 Spider, Sport Coupe, Spider 2000 and Pininfarina - 1971-1985 Requires two per car

Long engine to bell housing bolt - 1971-85

    Long or lower engine to transmission bell housing boltFIAT 124 Spider, Sport Coupe, Spider 2000 and Pininfarina - 1971-1985 Requires two per car

Flywheel Bolt - 10mm

Flywheel boltFIAT 124 Spider - 1966-1977FIAT 124 Sport Coupe - 1967-1977FIAT and Bertone X1/9 - 1974-1988 10mm diameter To engine number 0430996 - For later engines use EN5-071-Z Sold each

High Performance Flywheel Bolt Set - 1977-85

Ultra high performance ARP flywheel bolt setFIAT 124 Spider, Spider 2000 and Pininfarina 1977-1985 The set includes 6 ARP 12mm diameter bolts For 1800 engines from engine number 0430996 - For earlier...

Crankshaft Nut - 1971-83

Crankshaft Nut - 38 mmFIAT 124 Spider, Spider 2000 and Pininfarina - 1971-1983FIAT 124 Sport Coupe - 1971-1975

Crankshaft Bolt - 1983-85

Crankshaft pulley boltFIAT Pininfarina Spider - 1983-1985 Left hand thread

Crankshaft Bolt Washer - 1983-85

Crankshaft pulley bolt washerFIAT Pininfarina Spider - 1983-1985 Only applicable to crankshafts that use a bolt to secure the crank pulley For the bolt, see EN5-098  

Cylinder Head Bolts Set - SAVE 10%

Cylinder head bolts set of 10FIAT 124 Spider, Sport Coupe, Spider 2000 and Pininfarina - 1966-1985 Each engine requires 10 bolts - sold as a set Add new OEM head bolt washers EN5-466-Z

Cylinder Head Bolt

Cylinder head boltFIAT 124 Spider, Sport Coupe, Spider 2000 and Pininfarina - 1966-1985 Each engine requires 10 bolts

Cylinder Head Bolt Washer - OEM Original

Cylinder head bolt washerFIAT 124 Spider, Sport Coupe, Spider 2000 and Pininfarina 1966-1982 Each engine requires 10 washers OEM Original Fiat part   Approved for use in Auto Ricambi...

Ribe Cylinder Head Bolt Set

Cylinder head bolt set (ten bolts) FIAT 124 Spider, Spider 2000 and Pininfarina - 1966-1985 FIAT 124 Sport Coupe - 1967-1975   As found on the Pininfarina & Volumex Spider   Complete...

Cylinder Head Bolt Tool - Ribe 12

  Cylinder head bolt toolFor use with FIAT 124 Spider, Sport Coupe, Spider 2000 and Pininfarina 1966-1985 For use with our EN5-468 Ribe 12 Head Bolt Kit Durable and made in the...

Center Muffler - Spider 1966-78

  Center muffler with two resonators FIAT 124 Spider 1966-1978 (without catalytic converter) For 1974-1978 California models with a catalytic converter use EX7-483 Use clamp...

Performance Center Muffler - Spider 1966-78

      Large diameter center muffler with one resonatorFIAT 124 Spider 1966-1978 (without catalytic converter) Featuring a 50mm (~2") diameter - this is an easy way to improve the...

Center Muffler - 1974-80 - Carbureted with Catalytic Converter

Center muffler or resonatorFIAT Spider 2000 1979-1980 (carbureted)FIAT 124 Spider 1974-1978 (California models with catalytic converter) 3 bolt flange

Center Muffler - 1980-85 with Fuel Injected

Center muffler or resonatorFIAT Spider 2000 and Pininfarina 1980-1985 (fuel injected) 4 bolt flange

Center Muffler - Sport Coupe 1967-75

Center muffler or resonatorFIAT 124 Sport Coupe 1967-1975 (except California models with converter)

Performance Center Muffler - Sport Coupe 1967-75

Performance center muffler with one resonatorFIAT 124 Sport Coupe 1967-1975 (except California models with converter) These 50mm (~2") diameter resonators were originally on the European version of...

Performance Rear and Center Muffler Kit - Spider 1966-78

High-performance rear and center mufflers with clampFIAT 124 Spider 1966-1978 Kit includes: EX7-423-Z 50mm (2") center muffler with one resonator EX8-427-Z 50mm (2") rear muffler EX4-036 clamp Add...

Rear and Center Muffler Kit - Spider 1966-78

Rear and center mufflers with clampFIAT 124 Spider 1966-1978 Kit includes: EX7-423 center muffler with two resonators EX8-427 rear muffler with single chrome tip EX4-034 clamp Add hangers EX4-459...

Rear and Center Muffler Kit - Spider 1979-80

Rear and center mufflers with clampFIAT Spider 2000 - 1979-1980 - Carbureted Kit includes: EX7-483 center muffler EX8-428 rear muffler EX4-035 clamp Add hangers EX4-459 if needed (two per...

Rear and Center Muffler Kit - Spider 1980-85

Rear and center mufflers with clampFIAT Spider 2000, Pininfarina - 1980-1985 - with fuel injection Kit includes: EX7-425 center muffler EX8-428 rear muffler EX4-035 clamp Add hangers EX4-459 if...

Rear Muffler - Spider 1966-78

Rear muffler with small chrome tip FIAT 124 Spider 1966-1978 Add hangers EX4-459 and hanger brackets EX4-457 if needed (two per muffler)  

Performance Rear Muffler - Spider 1966-85

Performance rear muffler FIAT 124 Spider, Spider 2000 and Pininfarina - 1966-1985 This 50mm (~2") pipe diameter is an inexpensive way to upgrade to a straight-through performance muffler For use...

Bolt-on Chrome Tip for Rear Muffler

Bolt-on chrome tip for rear mufflersFIAT 124 Spider, Spider 2000 and Pininfarina - 1966-1985   This tip was designed for our EX8-427-Z and EX8-428 rear mufflers The muffler's outlet pipe must...

Rear Muffler - Spider 1979-85

Rear mufflerFIAT Spider 2000 and Pininfarina - 1979-1985    This muffler no longer requires the additional metal muffler hanger brackets For rubber muffler hangers use EX4-459...

Rear Muffler - Sport Coupe 1967-75

Rear mufflerFIAT 124 Sport Coupe 1967-1975  

Performance Rear Muffler - Sport Coupe 1967-75

Performance rear muffler FIAT 124 Sport Coupe 1967-1975 This 50mm (~2") pipe diameter rear muffler is an inexpensive way to upgrade to a straight-through performance muffler For use with...

Abarth Style Stainless Steel Header - 1971-78

    Stainless steel Abarth style header - inspired by those used on the World Rally Championship 124 Spider CSAFIAT 124 Spider and Sport Coupe - 1600 & 1800 - 1971-1978 (without...

Abarth Style Stainless Steel Header - 1979-85

Stainless Steel Abarth style header - Inspired by those used on the World Rally Championship 124 Spider CSA, but with a modified downpipe to fit the Spider 2000. FIAT Spider 2000 and Pininfarina -...

Down Pipe - 1966-72

      Exhaust downpipeFIAT 124 Spider and Sport Coupe 1966-1972 (1438 and 1608cc) Extends from the exhaust manifold to center muffler For the downpipe holder bracket, use part EX4-015