Auto Ricambi

Motor Mount - 1966-74

Complete engine motor mount assemblyFIAT 124 Spider - 1966-1974FIAT 124 Sport Coupe - 1967-1974 This accordion-style mount comes complete with the spring and top assembly Sold individually  

Motor Mount - 1974-85

Engine motor mountFIAT 124 Spider, Spider 2000 and Pininfarina - 1974-1985FIAT 124 Sport Coupe - 1974-1975 New solid-style motor mount Can also be used on earlier models Sold individually

Lowering Motor Mount - 1966-85

Lower or short engine motor mount FIAT 124 Spider, Spider 2000 and Pininfarina - 1966-1985FIAT 124 Sport Coupe - 1967-1975   Used when installing 1995cc motor in an earlier 124 Spider These...

Freeze Plug Kit

    Freeze plug kitFIAT 124 Spider, Sport Coupe, Spider 2000 and Pininfarina 1966-1985 Kit includes 5 freeze plugs

Engine Galley Plug - 24mm

24mm crank case galley plugFIAT 124 Spider, Sport Coupe, Spider 2000 and Pininfarina - 1966-1985 Located on the front of block  

Engine Oil Galley Plug - 16mm

    Engine block oil galley plug FIAT 124 Spider, Sport Coupe, Spider 2000 and Pininfarina - 1966-1985 16mm - Need 2 or 3 per engine, depending on engine size - Please check...

Engine Oil Galley Plug - 18mm

18mm engine block oil galley plugFIAT 124 Spider, Sport Coupe, Spider 2000 and Pininfarina - 1966-1985 18mm - Located on the front of the engine

Crank Shaft Galley Plug - 10mm

Engine crank shaft oil galley plugFIAT 124 Spider, Spider 2000 and Pininfarina - 1966-1985FIAT 124 Sport Coupe - 1967-1975FIAT and Bertone X1/9 - 1974-1988 10mm   Four required per crankshaft

Crankshaft Woodruff Key

Crankshaft woodruff key or keywayFIAT 124 Spider, Sport Coupe, Spider 2000 and Pininfarina - 1966-1985

Engine Coolant Drain Plug

Block coolant drain plugFIAT 124 Spider, Sport Coupe, Spider 2000 and Pininfarina 1966-1985 Located on the exhaust side of the block

Auxiliary Shaft Seal Cover

Auxiliary shaft seal cover FIAT 124 Spider, Sport Coupe, Spider 2000 and Pininfarina - 1966-1985  

Short engine to bell housing bolt - 1971-85

  Short or upper engine to transmission bell housing boltFIAT 124 Spider, Sport Coupe, Spider 2000 and Pininfarina - 1971-1985 Requires two per car

Long engine to bell housing bolt - 1971-85

    Long or lower engine to transmission bell housing boltFIAT 124 Spider, Sport Coupe, Spider 2000 and Pininfarina - 1971-1985 Requires two per car

Flywheel Bolt - 10mm

Flywheel boltFIAT 124 Spider - 1966-1977FIAT 124 Sport Coupe - 1967-1977FIAT and Bertone X1/9 - 1974-1988 10mm diameter To engine number 0430996 - For later engines use EN5-071-Z Sold each

High Performance Flywheel Bolt Set - 1977-85

Ultra high performance ARP flywheel bolt setFIAT 124 Spider, Spider 2000 and Pininfarina 1977-1985 The set includes 6 ARP 12mm diameter bolts For 1800 engines from engine number 0430996 - For earlier...

Crankshaft Nut - 1971-83

Crankshaft Nut - 38 mmFIAT 124 Spider, Spider 2000 and Pininfarina - 1971-1983FIAT 124 Sport Coupe - 1971-1975

Crankshaft Bolt - 1983-85

Crankshaft pulley boltFIAT Pininfarina Spider - 1983-1985 Left hand thread

Crankshaft Bolt Washer - 1983-85

Crankshaft pulley bolt washerFIAT Pininfarina Spider - 1983-1985 Only applicable to crankshafts that use a bolt to secure the crank pulley For the bolt, see EN5-098  

Cylinder Head Bolts Set - SAVE 10%

    Cylinder head bolts set of 10FIAT 124 Spider, Sport Coupe, Spider 2000 and Pininfarina - 1966-1985 Each engine requires 10 bolts - sold as a set Add new OEM head bolt washers EN5-466-Z

Cylinder Head Bolt

Cylinder head boltFIAT 124 Spider, Sport Coupe, Spider 2000 and Pininfarina - 1966-1985 Each engine requires 10 bolts

Ribe Cylinder Head Bolt Set

Cylinder head bolt set (ten bolts) FIAT 124 Spider, Spider 2000 and Pininfarina - 1966-1985 FIAT 124 Sport Coupe - 1967-1975   As found on the Pininfarina & Volumex Spider   Complete...

Cylinder Head Bolt Tool - Ribe 12

  Cylinder head bolt toolFor use with FIAT 124 Spider, Sport Coupe, Spider 2000 and Pininfarina 1966-1985 For use with our EN5-468 Ribe 12 Head Bolt Kit Durable and made in the...

Center Muffler - Spider 1966-78

  Center muffler with two resonators FIAT 124 Spider 1966-1978 (without catalytic converter) For 1974-1978 California models with a catalytic converter use EX7-483 Use clamp...

Performance Center Muffler - Spider 1966-78

      Large diameter center muffler with one resonatorFIAT 124 Spider 1966-1978 (without catalytic converter) Featuring a 50mm (~2") diameter - this is an easy way to improve the...

Center Muffler - 1974-80 - Carbureted with Catalytic Converter

Center muffler or resonatorFIAT Spider 2000 1979-1980 (carbureted)FIAT 124 Spider 1974-1978 (California models with catalytic converter) 3 bolt flange

Center Muffler - 1980-85 with Fuel Injected

Center muffler or resonatorFIAT Spider 2000 and Pininfarina 1980-1985 (fuel injected) 4 bolt flange

Center Muffler - Sport Coupe 1967-75

Center muffler or resonatorFIAT 124 Sport Coupe 1967-1975 (except California models with converter)

Performance Center Muffler - Sport Coupe 1967-75

Performance center muffler with one resonatorFIAT 124 Sport Coupe 1967-1975 (except California models with converter) These 50mm (~2") diameter resonators were originally on the European version of...

Performance Rear and Center Muffler Kit - Spider 1966-78

High-performance rear and center mufflers with clampFIAT 124 Spider 1966-1978 Kit includes: EX7-423-Z 50mm (2") center muffler with one resonator EX8-427-Z 50mm (2") rear muffler EX4-036 clamp Add...

Rear and Center Muffler Kit - Spider 1966-78

Rear and center mufflers with clampFIAT 124 Spider 1966-1978 Kit includes: EX7-423 center muffler with two resonators EX8-427 rear muffler with single chrome tip EX4-034 clamp Add hangers EX4-459...

Rear and Center Muffler Kit - Spider 1979-80

Rear and center mufflers with clampFIAT Spider 2000 - 1979-1980 - Carbureted Kit includes: EX7-483 center muffler EX8-428 rear muffler EX4-035 clamp Add hangers EX4-459 if needed (two per...

Rear and Center Muffler Kit - Spider 1980-85

Rear and center mufflers with clampFIAT Spider 2000, Pininfarina - 1980-1985 - with fuel injection Kit includes: EX7-425 center muffler EX8-428 rear muffler EX4-035 clamp Add hangers EX4-459 if...

Rear Muffler - Spider 1966-78

Rear muffler with small chrome tip FIAT 124 Spider 1966-1978 Add hangers EX4-459 and hanger brackets EX4-457 if needed (two per muffler)  

Performance Rear Muffler - Spider 1966-85

Performance rear muffler FIAT 124 Spider, Spider 2000 and Pininfarina - 1966-1985 This 50mm (~2") pipe diameter is an inexpensive way to upgrade to a straight-through performance muffler For...

Bolt-on Chrome Tip for Rear Muffler

Bolt-on chrome tip for rear mufflersFIAT 124 Spider, Spider 2000 and Pininfarina - 1966-1985   This tip was designed for our EX8-427-Z and EX8-428 rear mufflers The muffler's outlet pipe must...

Rear Muffler - Spider 1979-85

Rear mufflerFIAT Spider 2000 and Pininfarina - 1979-1985    This muffler no longer requires the additional metal muffler hanger brackets For rubber muffler hangers use EX4-459...

Rear Muffler - Sport Coupe 1967-75

Rear mufflerFIAT 124 Sport Coupe 1967-1975  

Performance Rear Muffler - Sport Coupe 1967-75

Performance rear muffler FIAT 124 Sport Coupe 1967-1975 This 50mm (~2") pipe diameter rear muffler is an inexpensive way to upgrade to a straight-through performance muffler For use with...

Abarth Style Stainless Steel Header - 1971-78

    Stainless steel Abarth style header - inspired by those used on the World Rally Championship 124 Spider CSAFIAT 124 Spider and Sport Coupe - 1600 & 1800 - 1971-1978 (without...

Abarth Style Stainless Steel Header - 1979-85

Stainless Steel Abarth style header - Inspired by those used on the World Rally Championship 124 Spider CSA, but with a modified downpipe to fit the Spider 2000. FIAT Spider 2000 and Pininfarina -...

Down Pipe - 1966-72

      Exhaust downpipeFIAT 124 Spider and Sport Coupe 1966-1972 (1438 and 1608cc) Extends from the exhaust manifold to center muffler For the downpipe holder bracket, use part EX4-015

Sedan Down Pipe - 1966-73

Exhaust downpipeFIAT 124 Sedan and Wagon 1966-1973 (1197 and 1438cc OHV) Extends from the exhaust manifold to center muffler For the downpipe gasket, use part 9GA474

Down Pipe - 1973-74

      Exhaust downpipeFIAT 124 Spider and Sport Coupe 1973-1974 (1592 and 1756cc) Will fit 1975-78 Spiders is a dual outlet manifold is used EX5-412 Extends from the exhaust manifold...

Down pipe - Spider 1974-80 - Carbureted with Converter

Exhaust downpipeFIAT Spider and Sport Coupe 1974-1980 (carbureted models with catalytic converter) Single pipe, connects to single outlet exhaust manifold and has 3-bolt flange to connect to the...

Down Pipe - 1980-85 with Fuel Injection

Exhaust downpipeFIAT Spider 2000 and Pininfarina 1980-1985 with fuel injection  Extends from exhaust manifold to catalytic converter For Spiders with rack and pinion steering...

Down Pipe - Pininfarina 1985 1/2 only

Exhaust downpipeFIAT Pininfarina 1985 1/2 only (with rack and pinion steering) Extends from the exhaust manifold to the catalytic converter For Spiders without rack and pinion steering, see...

Turbo Exhaust Manifold

Turbo exhaust manifoldFiat 124 Spider, Spider 2000, Pininfarina - 1968-1985 FIAT 124 Sport Coupe - 1967-1975   Cast iron exhaust manifold to be used for mounting a Garrett T3 turbo - Will not...

Exhaust Manifold - 1968-78

  New 2 outlet exhaust manifold Fiat 124 Sport Coupe and Spider - 1966-1974   Use down pipe EX5-470 or EX5-474 depending on engine and gasket GA4-473   Can be used to upgrade...

Exhaust Manifold - 1980-85 EFI

New 2-outlet exhaust manifold Fiat Spider 2000 and Pininfarina - 1980-1985 (with Bosch injection) Use down pipe EX5-480 or EX5-487 , depending on steering

Exhaust Manifold Long Stud

Exhaust manifold long stud FIAT 124 Spider, Spider 2000 and Pininfarina - 1966-1985FIAT 124 Sport Coupe - 1967-1975 Approximately 55mm (2.16") long - The short threaded portion is 15mm long Normally...

Exhaust Manifold Stud

    Exhaust manifold stud FIAT 124 Spider, Sport Coupe, Spider 2000 and Pininfarina - 1966-1985 Approximately 40mm (1.57") long

Oxygen Sensor Hole Plug

Oxygen sensor hole (bung) plug FIAT Spider 2000 and Pininfarina - 1979-1985   Used on our EX5-430 header when an oxygen sensor is not used Requires washer EX5-445