Auto Ricambi

OEM Original Oil Pan - 1973-76

OEM original oil panFIAT 124 Spider - 1973-1976 (1592 and 1756cc, to engine No. 0430996)FIAT 124 Sport Coupe - 1973-1975 (1592 and 1756cc)   On the exhaust the side the bolt holes are in a straight...

Oil Pan with Baffles - 1977-78

Oil pan with original factory style bafflesFIAT 124 Spider - 1977-1978 (1756cc from engine No. 0430996) Why settle for cheap reproductions when you can have a pan with OEM Fiat style baffles.  These...

Oil Pan without Baffles - 1979-85

Replacement non-baffled oil panFIAT Spider 2000 and Pininfarina - 1979-1985 (1995cc) An economical replacement oil pan for 2.0L engines Does not have the factory style baffles - for our baffled oil...

Oil Pan with Factory Baffles - 1979-85

Original style oil pan with baffles FIAT Spider 2000 and Pininfarina - 1979-1985 (1995cc)   Why settle for cheap reproductions when you can have a pan with OEM Fiat style baffles - These baffles are...

Oil Pan - 1979-85 - OEM Original

Original oil pan - NOSFIAT Spider 2000 and Pininfarina - 1979-1985 (1995cc) For gasket see GA1-476 OEM – Original Equipment Manufacturer NOS -

Non Magnetic Oil Drain Plug

Non-magnetic oil drain plugFIAT 124 Spider, Spider 2000 and Pininfarina - 1966-1985FIAT 124 Sport Coupe - 1967-1975FIAT and Bertone X1/9 - 1974-1988 (Transmission only) Requires a 12mm allen wrench...

Magnetic Oil Drain Plug

Magnetic oil drain plugFIAT 124 Spider, Spider 2000 and Pininfarina - 1966-1985FIAT 124 Sport Coupe - 1967-1975FIAT and Bertone X1/9 - 1974-1988 (Transmission only) Requires a 17mm wrench Also fits...

Oil Drain Plug - X1/9

Oil pan drain plugFIAT and Bertone X1/9 - 1974-1988

Transmission Fill Plug

Transmission and differential fill plugFIAT 124 Spider, Spider 2000 and Pininfarina - 1966-1985 (5 speed transmission)FIAT 124 Sport Coupe - 1967-1975 This 17mm hex, can also be used as a...

Transmission Side Plug

Transmission side plugFIAT 124 Spider, Spider 2000 and Pininfarina - 1966-1985FIAT 124 Sport Coupe - 1967-1975 This aluminum plug is located on the right side of the transmission above the filler...

Oil Pan Bolt Washer

  Oil pan bolt washerFIAT 124 Spider, Sport Coupe, Spider 2000 and Pininfarina - 1966-1985 Each pan requires 20 washers

Oil Drain Plug Bolt Allen Wrench

Oil drain plug allen wrenchFIAT 124 Spider, Spider 2000 and Pininfarina - 1966-1985FIAT 124 Sport Coupe - 1967-1975 FIAT and Bertone X1/9 - 1974-1988   Tool handle length may vary Note: this tool...

Oil Pump - 1966-76

Oil pumpFIAT 124 Spider - 1966-1976 (1438cc, 1592cc, 1608cc, and 1756cc) to engine No. 572366FIAT 124 Sport Coupe - 1967-1975 For gasket see GA1-454

Oil Pump - 1966-78

Oil pumpFIAT 124 Spider - 1966-1978 FIAT 124 Sport Coupe - 1967-1975 This pump has a slotted bolt hole so it will work on both early and late 1800cc engines For gasket use GA1-456 f

Oil Pump - 1979-85

Oil pumpFIAT Spider 2000 and Pininfarina - 1979-1985 (1995cc) For gasket see GA1-456

X1/9 Oil Pump

Oil pumpFIAT X1/9 and Bertone - 1974-1988

Oil Pump Drive Gear Bushing

Oil pump drive gear bushingFIAT 124 Spider, Spider 2000 and Pininfarina - 1966-1985FIAT Sport Coupe - 1967-1975FIAT and Bertone X1/9 - 1974-1988 Presses into the engine block and holds the oil pump...

Oil Pump Drive Gear - 1966-78

      Oil pump drive gearFIAT 124 Spider and Sport Coupe - 1966-1978 to

OEM Oil Pump Drive Gear - 1979-85

Oil pump drive gear - Original FIAT part FIAT Spider 2000 and Pininfarina - 1979-1985 from Spares number 1523288

Oil Pump Drive Gear - 1979-85

Oil pump drive gearFIAT Spider 2000 and Pininfarina - 1979-1985 from Spares Number 1523288 57.5mm overall height For th

High Performance Oil Sending Unit Adaptor

  Oil sender T bolt and banjo doublerFIAT 124 Spider, Spider 2000 and Pininfarina - 1966-1985 FIAT 124 Sport Coupe - 1967-1975 FIAT and Bertone X1/9 - 1974-1988

Oil Filter Housing - Early

Oil filter housingFIAT 124 Spider - 1966 to early 1977 FIAT 124 Sport Coupe - 1967-1975   Used on 124s with the alternator on the passenger side  

Long Hose Crank Case Ventilation - 1966-80

Long crank case breather hoseFIAT 124 Spider and Spider 2000 - 1966-1980 (carbureted)FIAT 124 Sport Coupe - 1967-1975   This is a properly formed hose for your 124 application - reproduced...

Long Hose Crank Case Ventilation - 1980-85

Long crank case breather hoseFIAT Spider 2000 and Pininfarina - 1980-1985 (with Bosch fuel injection) This is a properly formed hose for your 124 application - reproduced specifically for Auto...

Short Hose Crank Case Ventilation - 1966-73

Short crank case breather hoseFIAT 124 Spider and Sport Coupe (1438 & 1608cc) - 1966-1973FIAT 124 Sport Coupe (1438 & 1608cc) - 1967-1973 To install this, the oil-vapor separator will have to be...

Short Hose Crank Case Ventilation - 1973-77

Short crank case breather hoseFIAT 124 Spider - 1973-1977FIAT 124 Sport Coupe - 1973-1975 One side has an ID of ~16mm, the other side ~14.5mm To install this the oil/vapor separator will have to be...

Short Crank Case Ventilation Hose - 1977-78

Short crank case breather hoseFIAT 124 Spider - late 1977 to 1978 (1756cc)   Upper end is larger diameter (7/8 inch, 22mm)   To install this the oil/vapor separator will have to be

Short Hose Crank Case Ventilation - 1979-85

Short crank case breather hoseFIAT Spider 2000 and Pininfarina - 1979-1985 To install this, the oil/vapor separator will have to be removed - use gasket part number GA1-450 This is a proper

Flame Trap

Flame trap or spark arrestorFIAT 124 Spider, Spider 2000 and Pininfarina - 1966-1985FIAT 124 Sport Coupe - 1967-1975FIAT and Bertone X1/9 - 1974-1988 Installs in the air cleaner end of the long...

Oil Filler Cap

Oil filler capFIAT 124 Spider, Spider 2000 and Pininfarina - 1966-1985FIAT 124 Sport Coupe - 1967-1975FIAT and Bertone X1/9 - 1974-1988 Supplied complete with new seal Color may vary

Oil Filler Cap Gasket

Oil filler cap rubber gasketFIAT 124 Spider, Spider 2000 and Pininfarina - 1966-1985FIAT 124 Sport Coupe - 1967-75FIAT and Bertone X1/9 - 1974-1988 Manufactured in Italy to the highest standards by...

Silicone Oil Filler Cap Gasket

Silicone oil filler cap sealFIAT 124 Spider, Spider 2000 and Pininfarina - 1966-1985FIAT 124 Sport Coupe - 1967-75FIAT and Bertone X1/9 - 1974-1988Manufactured in Italy to the highest standards by...

Lower Dipstick Tube Seal - 1979-85

Lower dipstick tube to block seal FIAT Spider 2000 and Pininfarina - 1979-1985   Located between the base of dip stick tube and the engine block   Auto

Dipstick - 1979-85

Engine oil dipstickFIAT Spider 2000 and Pininfarina - 1979-1985 Requires a new mark be applied  For the tube please see item LU4-580

Temperature Gauge Sender

Coolant temperature sending unitFIAT 124 Spider, Spider 2000 and Pininfarina - 1966-1985FIAT 124 Sport Coupe - 1967-1975FIAT and Bertone X1/9 - 1974-1978 On the 124 this sender is located in the...

X1/9 Temperature Gauge Sender

Coolant temperature sending unitFIAT and Bertone X1/9 - 1979-1988 Controls the gauge reading

Temperature Gauge Switch

Coolant temperature switch or senderFIAT 124 Spider, Spider 2000 and Pininfarina - 1966-1985FIAT 124 Sport Coupe - 1967-1975 On the 124 this switch is located in the cylinder head - either between...

Sending Unit Boot

Sending unit bootFIAT 124 Spider, Spider 2000 and Pininfarina - 1966-1985FIAT 124 Sport Coupe - 1967-1975FIAT and Bertone X1/9 - 1974-1988 Fits most FIAT coolant and oil pressure sending units

Oil Pressure Light Sending Unit

Oil pressure light sending unit (switch)FIAT 124 Spider, Spider 2000 and Pininfarina - 1966-1985FIAT 124 Sport Coupe - 1967-1975FIAT and Bertone X1/9 - 1974-1988 Controls the low pressure warning...

Oil Temperature Sending Unit

Oil temperature sending unit for Veglia gaugesFIAT 124 Spider, Spider 2000 and Pininfarina - 1966-1985FIAT 124 Sport Coupe - 1967-1975FIAT and Bertone X1/9 - 1974-1988 Has 14x1.5mm threads, same as...

Oil Gauge Sending Unit

Oil pressure gauge sending unitFIAT 124 Spider, Spider 2000 and Pininfarina - 1966-1985 FIAT 124 Sport Coupe - 1967-1975 FIAT and Bertone X1/9 - 1974-1978  

Oil Gauge Sending Unit - 1983-85

Oil pressure level sending unitFIAT Spider Pininfarina - 1983-1985FIAT X1/9 - 1974-1978 Controls the gauge level - Sender with wire pigtail

Oil Pressure Gauge Sending Unit Boot

Oil pressure gauge sending unit bootFIAT 124 Spider, Spider 2000 and Pininfarina - 1966-1985FIAT 124 Sport Coupe - 1967-1975FIAT and Bertone X1/9 - 1974-1988   Fits the oil pressure senders

Motor Mount - 1966-74

Complete engine motor mount assemblyFIAT 124 Spider - 1966-1974FIAT 124 Sport Coupe - 1967-1974 This accordion-style mount comes complete with the spring and top assembly Sold individually  

Motor Mount - 1974-85

Engine motor mountFIAT 124 Spider, Spider 2000 and Pininfarina - 1974-1985FIAT 124 Sport Coupe - 1974-1975 New solid-style motor mount Can also be used on earlier models Sold individually

Lowering Motor Mount - 1966-85

Lower or short engine motor mount FIAT 124 Spider, Spider 2000 and Pininfarina - 1966-1985FIAT 124 Sport Coupe - 1967-1975   Used when installing 1995cc motor in an earlier 124 Spider

Freeze Plug Kit

    Freeze plug kitFIAT 124 Spider, Sport Coupe, Spider 2000 and Pininfarina 1966-1985 Kit includes 5 freeze plugs

Engine Galley Plug - 24mm

24mm crank case galley plugFIAT 124 Spider, Sport Coupe, Spider 2000 and Pininfarina - 1966-1985 Located on the front of block  

Engine Oil Galley Plug - 16mm

    Engine block oil galley plug FIAT 124 Spider, Sport Coupe, Spider 2000 and Pininfarina - 1966-1985 16mm - Need 2 or 3 per engine, depending on engine size - Please check car

Engine Oil Galley Plug - 18mm

18mm engine block oil galley plugFIAT 124 Spider, Sport Coupe, Spider 2000 and Pininfarina - 1966-1985 18mm - Located on the front of the engine

Crank Shaft Galley Plug - 10mm

Engine crank shaft oil galley plugFIAT 124 Spider, Spider 2000 and Pininfarina - 1966-1985FIAT 124 Sport Coupe - 1967-1975FIAT and Bertone X1/9 - 1974-1988 10mm  

Crankshaft Woodruff Key

Crankshaft woodruff key or keywayFIAT 124 Spider, Sport Coupe, Spider 2000 and Pininfarina - 1966-1985