Auto Ricambi

Threaded Nipple for Carburetors

Threaded nipple for carburetors, fuel pumps or fuel pressure regulators FIAT 124 Spider, Spider 2000 - 1966-1980 (carbureted) FIAT 124 Sport Coupe - 1967-1975FIAT and Bertone X1/9 - 1974-1980...

Fuel Fitting for IDF or HPMX Carburetor

Threaded fuel inlet nipple (barb) for Weber IDF or Empi HPMX carburetors   Each new carburetor comes with one fuel inlet, purchase this if more than one is needed per...

Manual Choke Conversion Kit - 32/36DFEV

Manual choke conversion kit for Weber 32/36DFEV or EMPI 32/36 carburetor  Allows the use of a choke cable to manually regulate the carburetor's choke Use our cable CA1-400

Carburetor Base Gasket

Carburetor base gasketFIAT 124 Spider, Sport Coupe and Spider 2000 - 1966-1980 (carbureted) Fits DHSA, DMSA, ADFA, ADF, ADHA, DFV, DFEV family of carburetors

Electric Choke Element - 32/36DFEV

Electric choke element for Weber 32/36DFEV or EMPI 32/36 carburetor         

Carburetor Base Spacer - 4.5mm

Carburetor base plate or spacerFIAT 124 Spider, Sport Coupe and Spider 2000 1966-1980 (carbureted) Approximately 4.5mm thick including gaskets Fits DHSA, DMSA, ADFA, ADF, ADHA, DFV, DFEV...

Carburetor Base Spacer - 17mm

Carburetor base plate or spacerFIAT 124 Spider, Sport Coupe and Spider 2000 1966-1980 (carbureted) Approximately 17mm thick including gaskets Useful when installing a carburetor with a...

Carburetor Brass Float

Carburetor brass floatFIAT 124 Spider, Spider 2000 and Pininfarina - 1966-1980FIAT 124 Sport Coupe - 1967-1975 Fits Weber DHSA, DMSA, ADFA and ADHA carburetors

Carburetor Accelerator Pump Diaphragm

Carburetor accelerator pump diaphragmFIAT 124 Spider, Spider 2000 and Pininfarina - 1966-1980 (carbureted)FIAT 124 Sport Coupe - 1967-1975 Also fits Weber and EMPI 32/36 carburetors

Choke Pulloff Diaphragm - 1975-80

Choke pull-off diaphragmFIAT 124 Spider, Sport Coupe and Spider 2000 1975-1980 (carbureted) Fits Weber 28/32 ADHA and Weber 32 ADFA

Auxiliary Pump Emissions Diaphragm - 1979-80

Auxiliary pump emissions diaphragmFIAT Spider 2000 1979-1980 (carbureted) Fits Weber 28/32 ADHA carburetor

Carburetor Secondary Actuating Diaphragm

Carburetor secondary barrel actuating diaphragmFIAT 124 Spider and Sport Coupe - 1966-1973 (Weber DHSA carburetor)FIAT Spider 2000 - 1979-1980 (Weber ADHA carburetor)FIAT X1/9 - 1979-1980 (Weber DHTA...

Power Valve Diaphragm - 1979-80

Power valve diaphragm FIAT Spider 2000 - 1979-1980 (carbureted)   Fits Weber 28/32 ADHA carburetor  

Fast Idle Diaphragm - 1975-80

Fast idle diaphragmFIAT 124 Spider and Spider 2000 - 1975-1980 (carbureted) FIAT 124 Sport Coupe - 1975   Fits Weber 28/32 ADHA and Weber 32 ADFA carburetors

Carburetor Idle Solenoid - 1975-78

Carburetor idle solenoidFIAT 124 Spider - 1975-1978FIAT 124 Sport Coupe -1975 Fits Weber 32 ADFA carburetors with 10mm treads

Carburetor Idle Solenoid - 1977-78

Carburetor idle solenoid FIAT 124 Spider - 1977-1978   Fits Weber 32 ADFA 2/100 carburetor with 8mm threads

Carburetor Idle Solenoid - 1978-80

Carburetor idle solenoidFIAT 124 Spider and Spider 2000 - 1978-1980 (with 32ADFA 11/100 carburetor) Fits carburetors on late 1756cc and 1995cc engines with 8mm threads

Idle Jet for Single Carburetors

Carburetor Idle jet - Choose quantity and size from listFIAT 124 Spider, Sport Coupe and Spider 2000 - 1966-1980 Fits Weber DFV, DFEV, DHSA, DMSA, ADFA and ADHA carburetors Other sizes may be...

Carburetor Stud - 35mm

35mm long carburetor mounting studFIAT 124 Spider, Sport Coupe and Spider 2000 1966-1980 (carbureted) For use when mounting a DFEV, DHSA, or DMSA type carburetor without a spacer

Carburetor Stud - 42mm

      42mm long carburetor mounting studFIAT 124 Spider, Sport Coupe and Spider 2000 1966-1980 (carbureted) For use when mounting a DFEV, DHSA, or DMSA type carburetor with a...

Carburetor & Intake Stud - 50mm

50mm long carburetor or intake mounting studFIAT 124 Spider, Sport Coupe and Spider 2000 1966-1980 (carbureted)Can be used with our 14mm spacer and a DFEV carburetor as well as mounting intake...

Carburetor Stud - 60mm

60mm long carburetor mounting studFIAT 124 Spider, Sport Coupe and Spider 2000 1966-1980 (carbureted)

Air Cleaner Stud and Nut

Air cleaner to carburetor stud and nutFIAT 124 Spider, Sport Coupe and Spider - 2000 1966-1980 (carbureted) M5 35mm overall length with the threaded portion at 22mm

Air Cleaner Repair Stud and Nut

Air cleaner to carburetor repair stud and nutFIAT 124 Spider, Sport Coupe and Spider 2000 - 1966-1980 (carbureted) Repair stud with both M5 and M6 threads 35mm overall length with the threaded...

Ball Stud for Carburetor Linkage

Carburetor linkage ball studFIAT 124 Spider and Spider - 2000 1966-1980 (carbureted)FIAT 124 Sport Coupe - 1967-1975FIAT and Bertone X1/9 - 1974-1988   M5 threads  Clip CA0-680 clips onto...

Nut for Ball Stud

Nut for carburetor linkage stud FIAT 124 Spider, Sport Coupe and Spider 2000 - 1966-1980 (carbureted)   M5 threads

Carburetor Nut - 11mm hex

  Carburetor hold down nutFiat 124 Spider, Sport Coupe and Spider 2000 1966-1980 (carbureted) 11mm hex - 8x1.25mm thread This nut uses an 11mm wrench or socket to allow easier tightening in...

Intake Manifold Vacuum Port Block Off Plug

Bolt to block off small vacuum port hole in intake manifoldFIAT 124 Spider, Sport Coupe and Spider 2000 1968-1980 (carbureted) Steel 10mm bolt, comes with copper sealing washer  

Hex Plug for Intake Manifold EGR Hole

Intake manifold hex plugFIAT 124 Spider 1974-1978 FIAT 124 Sport Coupe 1974-1975   M16   Our steel hex plug can be used on the intake manifold EGR hole and some of the sensor...

Allen Hex Plug - 16x1.5mm

Aluminum hex plug - 16 x 1.5mm   Used on some intake manifolds  

Allen Hex Plug - 20x1.5mm

Aluminum hex plug - 20 x 1.5mm   Used on some intake manifolds and cylinder heads  

Allen Hex Plug - 22x1.5mm

Aluminum hex plug - 22 x 1.5mm   Used on some intake manifolds  

Allen Hex Plug - 24x1.5mm

Aluminum hex plug - 24 x 1.5mm   Used on some intake manifolds  

Intake Manifold & Head Hex Plug - 18x1.5mm

Aluminum intake manifold & cylinder head hex plug- 18x1.5mm Intake manifold plug for FIAT 124 Spider and Sport Coupe - 1974-1978Cylinder head port plug for Fiat Spider 2000 - 1979-1980...

Weber 40 IDF Insulator Spacer

Weber 40 IDF insulator spacerFiat 124 Spider, Sport Coupe, Spider 2000 (with Weber IDF carburetors) Fits between the carburetor and the manifold to insulate the carburetor from heat 2.8mm thick

Weber 44 IDF Insulator Spacer Pair

Weber 44 IDF hard rubber insulator spacer pairFiat 124 Spider, Sport Coupe, Spider 2000 (with Weber IDF carburetors)   Fits between the carburetor and the manifold to insulate the...

Weber IDF Carburetor Base Gasket

Weber 40 IDF or 44IDF base gasket Also for Empi HPMX carburetors Fiat 124 Spider, Sport Coupe, Spider 2000 (with Weber IDF carburetors) Need 2 per carburetor, or 4 per carburetor if insulator...

HPMX Carburetor Top Gasket Set

HPMX carburetor top gasket pairFiat 124 Spider, Sport Coupe and Spider 2000 (with HPMX carburetors)  

Baffled Fuel Tank Kit - 1970-76 - SAVE 20%

New electrogalvanized fuel tank kit - Featuring exclusive OE style baffled design FIAT 124 Spider - 1968-1976   Auto Ricambi Kit includes: Auto Ricambi exclusive OE style baffled...

Baffled Fuel Tank Kit - 1977-80 - SAVE 20%

New electrogalvanized fuel tank kit - Featuring exclusive OE style baffled design FIAT 124 Spider and Spider 2000 - 1977-1980 (carbureted)    Auto Ricambi Kit includes Equipped...

Baffled Fuel Tank Kit - 1980-85 - SAVE 20%

New electrogalvanized fuel tank kit - Featuring exclusive OE style baffled designFIAT 124 Spider 2000 and Pininfarina - 1980-1985 (with Bosch fuel injection)   Auto Ricambi Kit...

Baffled Fuel Tank - 1966-69 - Non-emission

New electrogalvanized fuel or gas tank with OE style baffled design FIAT 124 Spider and Sport Coupe - 1966-1969  Also fits non-emissions models from outside of North America -...

Baffled Fuel Tank - 1970-80 Carbureted

New electrogalvanized fuel tank with OE style baffled designFIAT 124 Spider, Sport Coupe and Spider 2000 - 1970-1980 (carbureted)   Equipped with three vapor line nipples as OE...

Non-Baffled Fuel Tank - 1970-80 Carbureted

New electrogalvanized fuel tank without bafflesFIAT 124 Spider, Sport Coupe and Spider 2000 - 1970-1980 (carbureted)   Equipped with three vapor line nipples as OE equipped on...

Baffled Fuel Tank - 1980-85 Fuel Injected

New electrogalvanized fuel tank with OE style baffled design FIAT 124 Spider 2000 and Pininfarina - 1980-1985 (with Bosch fuel injection)   Auto Ricambi exclusive OE style baffled design...

Baffled Fuel Tank - Volumex

New electrogalvanized fuel tank with OE style baffled design FIAT 124 Spider Volumex - 1984-1985   Auto Ricambi exclusive OE style baffled design - prevents fuel from 'sloshing'...

Non-Baffled Fuel Tank - 1980-85 Fuel Injected

New electrogalvanized fuel tank without baffles FIAT 124 Spider 2000 and Pininfarina - 1980-1985 (with Bosch fuel injection)   Without baffle - just like other supplier sell - For our...

Fuel Tank to Body Sealing Foam

Fuel tank to body sealing foam insulation FIAT 124 Spider, Sport Coupe, Spider 2000 and Pininfarina - 1966-1985    This self adhesive sealing high density foam insulation is used...

Fuel Tank

New fuel tank FIAT and Bertone X1/9 - 1974-1988   For the sending unit hold down nuts use our FU3-507

Fuel Tank - 124 Sedan 1966-74

New fuel tank FIAT 124 Sedan and Special - 1966-1974   Has the vapor line nipples as original on European models   For the sending unit hold down nuts use our FU3-507   Auto...

Ethanol Resistant Filler Hose - Spider 1966-76

Ethanol resistant fuel filler hose FIAT 124 Spider - 1966-1976   These filler neck hoses are manufactured identically to the FIAT factory original hose and are constructed using modern...

Ethanol Resistant Fuel Hose - Spider 1977-85

Ethanol resistant fuel filler hose   FIAT 124 Spider, Spider 2000 and Pininfarina - 1977-1985   These filler neck hoses are manufactured identically to the FIAT factory original hose...