Auto Ricambi

Fuel Filter or Screen

Carburetor fuel screen or filterFIAT 124 Spider - 1966-1974FIAT 124 Sport Coupe - 1967-1974FIAT X1/9 - 1974-1980   Located at the fuel inlet of the carburetor   For the worlds smallest fire...

Fuel Filter or Screen - 1975-80

Carburetor fuel screen or filter FIAT 124 Spider, Spider 2000 - 1975-1980 (Carbureted)FIAT 124 Sport Coupe -1975   For the ADF, ADFA, ADHA family of Weber carburetors   Located at the fuel...

Fuel Pump Pre-Filter - with Fuel Injection

Screen type pre-filter for the fuel pump FIAT 124 Spider 2000 and Pininfarina - 1980-1985 (with Bosch fuel injection)FIAT and Bertone X1/9 - 1980-1988 (with Bosch fuel injection)   Protects...

Fuel Filter Mounting Bracket - 1980-on

Fuel filter mounting bracket setFIAT Spider 2000 and Pininfarina - 1980-1985 (with Bosch fuel injection)FIAT and Bertone X1/9 - 1980-1988 (with Bosch fuel injection) Original New Old Stock - NOS For...

Performance Manifold and Carburetor Conversion Kit - 1979-80

Choose your kit options High Performance single plane intake manifold with EMPI carburetor upgrade kit with standard ports  or High Performance single plane intake manifold with...

Performance Single Plane Intake Manifold

High performance single plane intake manifold for upgrading 2000cc or 1600cc engines FIAT 124 Spider and Sport Coupe - 1971-1973FIAT 124 Spider 2000 - 1979-1980 (carbureted)   The...

High Performance Weber 38 DGS Carburetor Kit

New synchronous-opening High Performance Weber 38/38 DGS carburetorFIAT 124 Spider, Sport Coupe and Spider 2000 1975-1980 (carbureted) NOTE - Can be used on 1966-1974, but a custom throttle linkage...

Dual IDF Carburetor Kit - Auto Ricambi Special

      Auto Ricambi special dual IDF clone carburetor conversion kitFIAT 124 Spider, Sport Coupe, Spider 2000 and Pininfarina 1971-1985 (except 1438cc) Improve the performance of...

Dual IDF Intake Manifold Kit

Manifold kit for dual IDF carburetorsFIAT 124 Spider, Sport Coupe, Spider 2000 and Pininfarina 1971-1985 (except 1438cc) Our kit is supplied with: Cast and machined IDF manifold 4 gaskets 8 studs,...

Inter-Carb Linkage for Dual Carburetors

Two linkage pieces which go between a pair of IDF carburetors Fiat 124 Spider, 2000 Spider - 1966-1980 (with dual carburetors) FIAT 124 Sport Coupe - 1967-1975 (with dual carburetors)   Linkage...

Wide IDF Carburetor Inter-Carb Linkage

Two linkage pieces that go between a pair of IDF carburetors or other dual carburetorsFiat 124 Spider, Sport Coupe, 2000 Spider - 1966-1980 (with IDF carburetors) Linkage allows the synchronization...

32mm Venturi - 40 IDF Carburetor

One 32mm venturi for 40 IDF carburetorsFiat 124 Spider, Sport Coupe, 2000 Spider 1966-1980 (with IDF carburetors) Most 40-IDF carburetors come with smaller chokes from the factory, 32mm is the...

Carburetor Repair Kit - DHSA - 1968-73

Carburetor repair kit FIAT 124 Spider - 1968-1973FIAT 124 Sport Coupe - 1968-1973 Fiats Weber DHSA carburetor Includes accelerator pump diaphragm and all necessary gaskets, seals, needle and...

Carburetor Repair Kit - 34 DMSA - 1974

  Carburetor repair kitFIAT 124 Spider and Sport Coupe 1974 Fits Weber 34 DMSA carburetor Includes accelerator pump diaphragm and all necessary gaskets, seals, needle and seat

Carburetor Repair Kit - ADFA & ADHA - 1975-80

Carburetor repair kitFIAT 124 Spider and Spider 2000 - 1975-1980FIAT 124 Sport Coupe - 1975 Fits Weber 32 ADFA or 28/32 ADHA carburetors Includes accelerator pump diaphragm and all necessary gaskets,...

Carburetor Top Gasket - 1975-80 ADFA or ADHA

Carburetor top gasketFIAT 124 Spider, Sport Coupe and Spider 2000 - 1975-1980 Fits Weber 32 ADFA or 28/32 ADHA carburetor

Carburetor Middle Gasket - 1975-80 ADFA or ADHA

Carburetor middle gasketFIAT 124 Spider, Sport Coupe and Spider 2000 - 1975-1980 (with Weber 32 ADFA or 28/32 ADHA carburetors) This gasket is located on either side of the spacer between the...

Carburetor Repair Kit - Weber 40 IDF

Carburetor repair kitFiat 124 Spider, Sport Coupe, and Spider 2000 (with Weber IDF carburetors) Fits Weber 40 IDF carburetor Contains accelerator pump diaphragm, needle and seat, all...

Threaded Nipple for Carburetors

Threaded nipple for carburetors, fuel pumps or fuel pressure regulators FIAT 124 Spider, Spider 2000 - 1966-1980 (carbureted) FIAT 124 Sport Coupe - 1967-1975FIAT and Bertone X1/9 - 1974-1980...

Fuel Fitting for IDF or HPMX Carburetor

Threaded fuel inlet nipple (barb) for Weber IDF or Empi HPMX carburetors   Each new carburetor comes with one fuel inlet, purchase this if more than one is needed per...

Manual Choke Conversion Kit - 32/36DFEV

Manual choke conversion kit for Weber 32/36DFEV or EMPI 32/36 carburetor  Allows the use of a choke cable to manually regulate the carburetor's choke Use our cable CA1-400

Carburetor Base Gasket

Carburetor base gasketFIAT 124 Spider, Sport Coupe and Spider 2000 - 1966-1980 (carbureted) Fits DHSA, DMSA, ADFA, ADF, ADHA, DFV, DFEV family of carburetors

Electric Choke Element - 32/36DFEV

Electric choke element for Weber 32/36DFEV or EMPI 32/36 carburetor         

Carburetor Base Spacer - 4.5mm

Carburetor base plate or spacerFIAT 124 Spider, Sport Coupe and Spider 2000 1966-1980 (carbureted) Approximately 4.5mm thick including gaskets Fits DHSA, DMSA, ADFA, ADF, ADHA, DFV, DFEV...

Carburetor Base Spacer - 17mm

Carburetor base plate or spacerFIAT 124 Spider, Sport Coupe and Spider 2000 1966-1980 (carbureted) Approximately 17mm thick including gaskets Useful when installing a carburetor with a...

Carburetor Brass Float

Carburetor brass floatFIAT 124 Spider, Spider 2000 and Pininfarina - 1966-1980FIAT 124 Sport Coupe - 1967-1975 Fits Weber DHSA, DMSA, ADFA and ADHA carburetors

Carburetor Accelerator Pump Diaphragm

Carburetor accelerator pump diaphragmFIAT 124 Spider, Spider 2000 and Pininfarina - 1966-1980 (carbureted)FIAT 124 Sport Coupe - 1967-1975 Also fits Weber and EMPI 32/36 carburetors

Choke Pulloff Diaphragm - 1975-80

Choke pull-off diaphragmFIAT 124 Spider, Sport Coupe and Spider 2000 1975-1980 (carbureted) Fits Weber 28/32 ADHA and Weber 32 ADFA

Auxiliary Pump Emissions Diaphragm - 1979-80

Auxiliary pump emissions diaphragmFIAT Spider 2000 1979-1980 (carbureted) Fits Weber 28/32 ADHA carburetor

Carburetor Secondary Actuating Diaphragm

Carburetor secondary barrel actuating diaphragmFIAT 124 Spider and Sport Coupe - 1966-1973 (Weber DHSA carburetor)FIAT Spider 2000 - 1979-1980 (Weber ADHA carburetor)FIAT X1/9 - 1979-1980 (Weber DHTA...

Power Valve Diaphragm - 1979-80

Power valve diaphragm FIAT Spider 2000 - 1979-1980 (carbureted)   Fits Weber 28/32 ADHA carburetor  

Fast Idle Diaphragm - 1975-80

Fast idle diaphragmFIAT 124 Spider and Spider 2000 - 1975-1980 (carbureted) FIAT 124 Sport Coupe - 1975   Fits Weber 28/32 ADHA and Weber 32 ADFA carburetors

Carburetor Idle Solenoid - 1975-78

Carburetor idle solenoidFIAT 124 Spider - 1975-1978FIAT 124 Sport Coupe -1975 Fits Weber 32 ADFA carburetors with 10mm treads

Carburetor Idle Solenoid - 1977-78

Carburetor idle solenoid FIAT 124 Spider - 1977-1978   Fits Weber 32 ADFA 2/100 carburetor with 8mm threads

Carburetor Idle Solenoid - 1978-80

Carburetor idle solenoidFIAT 124 Spider and Spider 2000 - 1978-1980 (with 32ADFA 11/100 carburetor) Fits carburetors on late 1756cc and 1995cc engines with 8mm threads

Idle Jet for Single Carburetors

Carburetor Idle jet - Choose quantity and size from listFIAT 124 Spider, Sport Coupe and Spider 2000 - 1966-1980 Fits Weber DFV, DFEV, DHSA, DMSA, ADFA and ADHA carburetors Other sizes may be...

Carburetor Stud - 35mm

35mm long carburetor mounting studFIAT 124 Spider, Sport Coupe and Spider 2000 1966-1980 (carbureted) For use when mounting a DFEV, DHSA, or DMSA type carburetor without a spacer

Carburetor Stud - 42mm

      42mm long carburetor mounting studFIAT 124 Spider, Sport Coupe and Spider 2000 1966-1980 (carbureted) For use when mounting a DFEV, DHSA, or DMSA type carburetor with a...

Carburetor & Intake Stud - 50mm

50mm long carburetor or intake mounting studFIAT 124 Spider, Sport Coupe and Spider 2000 1966-1980 (carbureted)Can be used with our 14mm spacer and a DFEV carburetor as well as mounting intake...

Carburetor Stud - 60mm

60mm long carburetor mounting studFIAT 124 Spider, Sport Coupe and Spider 2000 1966-1980 (carbureted)

Air Cleaner Stud and Nut

Air cleaner to carburetor stud and nutFIAT 124 Spider, Sport Coupe and Spider - 2000 1966-1980 (carbureted) M5 35mm overall length with the threaded portion at 22mm

Air Cleaner Repair Stud and Nut

Air cleaner to carburetor repair stud and nutFIAT 124 Spider, Sport Coupe and Spider 2000 - 1966-1980 (carbureted) Repair stud with both M5 and M6 threads 35mm overall length with the threaded...

Air Filter Stud Metal Sleeve

Air filter stud metal sleeve or bushingFIAT 124 Spider, Spider 2000 and Pininfarina - 1966-1985FIAT 124 Sport Coupe - 1967-1975FIAT and Bertone X1/9 - 1974-1988 M5-ID 13mm Length

Ball Stud for Carburetor Linkage

Carburetor linkage ball studFIAT 124 Spider and Spider - 2000 1966-1980 (carbureted)FIAT 124 Sport Coupe - 1967-1975FIAT and Bertone X1/9 - 1974-1988   M5 threads  Clip CA0-680 clips onto...

Nut for Ball Stud

Nut for carburetor linkage stud FIAT 124 Spider, Sport Coupe and Spider 2000 - 1966-1980 (carbureted)   M5 threads

Carburetor Nut - 11mm hex

  Carburetor hold down nutFiat 124 Spider, Sport Coupe and Spider 2000 1966-1980 (carbureted) 11mm hex - 8x1.25mm thread This nut uses an 11mm wrench or socket to allow easier tightening in...

Intake Manifold Vacuum Port Block Off Plug

Bolt to block off small vacuum port hole in intake manifoldFIAT 124 Spider, Sport Coupe and Spider 2000 1968-1980 (carbureted) Steel 10mm bolt, comes with copper sealing washer  

Hex Plug for Intake Manifold EGR Hole

Intake manifold hex plugFIAT 124 Spider 1974-1978 FIAT 124 Sport Coupe 1974-1975   M16   Our steel hex plug can be used on the intake manifold EGR hole and some of the sensor...

Allen Hex Plug - 16x1.5mm

Aluminum hex plug - 16 x 1.5mm   Used on some intake manifolds  

Allen Hex Plug - 20x1.5mm

Aluminum hex plug - 20 x 1.5mm   Used on some intake manifolds and cylinder heads  

Allen Hex Plug - 22x1.5mm

Aluminum hex plug - 22 x 1.5mm   Used on some intake manifolds  

Allen Hex Plug - 24x1.5mm

Aluminum hex plug - 24 x 1.5mm   Used on some intake manifolds