Auto Ricambi

2017-20 124 Spider Stainless Exhaust Gasket

Gasket for 124 Spider stainless muffler delete FIAT 124 Spider - 2017-2020 with Auto Ricambi exhaust Replacement gasket for the Auto Ricambi resonated and non resonated rear exhaust The gasket...

2017-2020 124 Spider Resonated Stainless Exhaust

124 Spider Resonated Stainless ExhaustFits 2017on FIAT 124 Spider and Spider Abarth This rear section replaces the factory rear muffler on the 124 Abarth and Lusso/Classica and features Auto...

2017-2020 124 Spider Wind Deflector - Illuminated

Wind Deflector - IlluminatedFIAT 124 Spider - 2017-2020 These Illuminated Wind Restrictor accessories for the  2017-2020 Fiat 124 Spider are a one-of-a-kind product and can be personalized with...

2017-2020 124 Spider Wind Deflector - Non-Illum

    Wind Deflector - Non-IlluminatedFIAT 124 Spider - 2017-2020 This non-illuminated version of the Wind Restrictor accessories for the 2017on Fiat 124 Spider is a one-of-a-kind...

2017-20 9 Volt Battery Pack for Illuminated Wind Deflectors

      9 volt battery pack for illuminated wind reflectorFIAT 124 Spider - 2017-2020 Perfect for car shows or display - Uses standard 9V battery and is easily installed (battery not...

2017-20 FIAT Spider Power Pack - Illuminated Wind Deflectors

    Rechargeable Power Pack for illuminated wind deflectorFIAT 124 Spider - 2017-2020 This is our #1 recommended power source for car shows and easy installation...

Black Hood Strut Kit - Fiat 124 Spider 2017-20

Black hood strut kit FIAT 124 Spider - 2017-2020   Hydraulic hood struts to replace the prop rod Easy installation, no modification or drilling required   Installation Instructions

Red Hood Strut Kit - Fiat 124 Spider 2017-20

Red hood strut kit FIAT 124 Spider - 2017-2020   Hydraulic hood struts to replace the prop rod Easy installation, no modification or drilling required   Installation Instructions

124 Spider Trunk Emblem

124 Spider Trunk EmblemFIAT 124 Spider - 2017-2020 An authentic FIAT product    

2017-20 124 Spider Front License Plate Holder

    Front license plate holderFIAT 124 Spider - 2017-2020 Some areas require a front mounted license plate. Avoid drilling holes in the bumper of your new Spider and use this front license...

2017-20 124 Spider Cup Holder Device Mount

    Device mount - cup holder slotFIAT 124 Spider - 2017-2020 Comes with everything you need to mount your device into the cup holder slot in your Spider.

Upper Strut Brace

  FIAT 500 upper strut brace - Red 2012-2019 Fiat 500 2-door models   These strut braces are used to improve handling by stiffening the unibody on the US version of the 500. Easy to install...

Lower Strut Brace

FIAT 500 lower strut brace - Red 2012-2019 FIAT 500 2-door models   These strut braces are used to improve handling by stiffening the unibody on the US version of the 500. Easy to install and...

Abarth Control Arm Large Bushing

2012-2019 FIAT 500 Abarth and Turbo front control arm large bushing Fiat 500 Abarth & Turbo, 2012-2019    Left or right  

Control Arm Inner Bushing

2012-2019 FIAT 500 Front control arm inner bushing Fiat 500 2-Door models, 2012-2019    Left or right  

Control Arm Large Bushing

2012-2019 FIAT 500 Front control arm large bushing Fiat 500 2-Door models, 2012-2019    Left or right  

Rear Axle Bushing

Rear axle bushing FIAT 500 2-door models - 2012-2019   Left or right side Sold individually  

500 Strut Top Mount Kit

Strut Top Mount Kit FIAT 500 2-door models - 2012-2019    

Nolathane Axle Pivot Bushing Kit

Nolathane rear axle pivot bushing kit Fiat 500 - 2012-2019 all 2-door models   Upgrading to Nolathane's superior formulation bushings will result in better road feel and precision

Nolathane Control Arm Front Bushing Pair

Nolathane front control arm front bushing pair Fiat 500 - 2012-2019 all 2-door models   Upgrading to Nolathane's superior formulation bushings will result in a better steering feel and...

Nolathane Control Arm Rear Bushing Pair

Nolathane front control arm rear bushing pair Fiat 500 - 2012-2019 all 2-door models   Upgrading to Nolathane's superior formulation bushings will result in better steering feel and...

Rear Bump Stop Pair - 2012-2019

  FIAT 500 Rear bump stop pair 2012-2019 Fiat 500 2-Door models   Two bump stops included  

Rear Upper Spring Isolator - 2012-2019

  Rear upper spring isolator 2012-2019 Fiat 500 2-Door models   Located between the rear spring and the body   Sold individually  

Ball Joint

FIAT 500 Ball Joint - Left or right Fiat 500 non-turbo 2-door models - 2013-2019   Does not fit Abarth, or any models with cast steel control arms    

Right Front Control Arm - Non-Turbo

Right front control arm - Non-turbo FIAT 500 2-door models, 2013-2019    Passenger side - This is a stamped steel arm          

Left Front Control Arm - Non-Turbo

Left front control arm - Non-turbo FIAT 500 2-door models, 2013-2019   Driver's side - This is a stamped steel arm        

Right Tie Rod End Pair

FIAT 500 Right tie rod end pair - Must be used together, cannot be used with original tie rods Fiat 500 2-door models, 2012-2019    Passenger side        

Left Tie Rod End Pair

FIAT 500 Left tie rod end pair - Must be used together, cannot be used with original tie rods Fiat 500 2-door models, 2012-2019    Driver side      

Inner Tie Rod End - 2012-19

FIAT 500 Inner tie rod end - left or right Fiat 500 2-door models, 2012-2019    Sold individually          

Outer Tie Rod End - 2012-19

Outer tie rod end - left or right FIAT 500 2-door models, 2012-2019    Sold individually          

500 Steering Rack boot - 2012-19

Steering rack boot Fiat 500 2-door models, 2012-2019    Sold individually          

2017-20 FIAT 124 Spider 73/54mm Wheel centering ring

73/54mm Wheel centering ring2017-2020 FIAT 124 Spider For Enkei RPF1 and other wheels    

2017-20 FIAT 124 Spider 72/54mm Wheel centering ring

      72/54mm Wheel centering ringFIAT 124 Spider - 2017-2020 For Enkei TS-10 and EDR9 wheels

Mahogany Radio Console Wood - 2-hole

  African mahogany radio console wood - 2-hole typeFIAT Spider 2000 - 1979-1980 Option to go with the African Mahogany dash wood set Grain or color may not be an exact match with the rest of...

Mahogany Radio Console Wood - 3-hole

  African mahogany radio console wood - 3-hole typeFIAT Spider 2000 with Fuel Injection - 1980 -1982 Option to go with the African Mahogany dash wood set Grain or color may not be an exact match...

Black Walnut Radio Console Wood - 2-hole

Black walnut radio console wood - 2-hole typeFIAT Spider 2000 - 1979-1980 This is an option to go with the African Mahogany dash wood set Grain or color may not be an exact match with the rest of...

Black Walnut Radio Console Wood - 3-hole

  Black Walnut radio console wood - 3-hole typeFIAT Spider 2000 with Fuel Injection- 1980-1982 Option to go with the African Mahogany dash wood set Grain or color may not be an exact match with...

Cluster shaft - 1979-80

Cluster shaftFIAT X1/9 - 1979 to 11/1980 production date With keyed 5th gear - Toothcount: 12/17/22/47 (not counting the reverse gear) Be sure to check the toothcount against your shaft before...

1-2 OEM Slider Hub - 1974-88

1-2 slider hubFIAT and Bertone X1/9 - 1974-1988 This is the part that the synchronizer sleeve for first and second gears rides on OEM - Original FIAT part  

1-2 Synchro Ring - 1974-88

1-2 synchro ringFIAT and Bertone X1/9 - 1974-1988 This is the synchronizer ring for first or second gear Need one synchro ring per gear

1-2-Reverse Synchro Sleeve - 1974-77

1-2-Reverse synchro sleeve FIAT and Bertone X1/9 - 1974-1977 Synchronizer sleeve for first and second gear which also incorporates the reverse gear Please check thickness to ensure this is the...

1-2-Reverse Synchro Sleeve - 1977-88

1-2-Reverse synchro sleeveFIAT and Bertone X1/9 - 1977-1988 This is the synchronizer sleeve for first and second gear which also incorporates the reverse gear Please check thickness to ensure this is...

1/2 Shift Fork - 1978-88

1/2 Shift forkFIAT and Bertone X1/9 - 1978 to 1988  

1st Gear -1984-88

Transmission first gear Bertone X1/9 - From VIN 0145857 (1984) to 1988 45 teeth

Reverse Idler Gear -1974-84

Transmission reverse idler gear FIAT & Bertone X1/9 - 1974-1984 to VIN #149269 31 teeth 16mm Inside diameter

2nd Gear - 1977-88

Transmission second gear FIAT and Bertone X1/9 - 1977-1988 38 teeth  

3-4 OEM Slider Hub - 1978-88

3-4 slider hubFIAT and Bertone X1/9 - 1978-1988 This is the part that the synchronizer sleeve for third and forth gears slides on OEM - Original FIAT part  

3/4 Shift Fork - 1974-88

3/4 Shift forkFIAT and Bertone X1/9 - From VIN 78919 to 1988    

3rd Gear - 1978-80

Transmission 3rd gear FIAT and Bertone X1/9 - 1978-1980 32 teeth - Always check tooth count before ordering  

3rd Gear - 1981-84

Transmission third gear FIAT and Bertone X1/9 - from VIN 147744 (1981) to 1984 57 teeth - Always check toothcount before ordering  

4th Gear -1974-78

Transmission fourth gear FIAT X1/9 - From VIN ending in 78918 in 1976 to 1978 47 teeth For four-speed transmissions

4th Gear -1979-80

Transmission fourth gear FIAT X1/9 - 1979-1980 49 teeth - Always check toothcount before ordering For five-speed transmissions