Auto Ricambi

Brake Light Switch Pad - Sport Coupe

Parking brake light switch padFIAT 124 Sport Coupe - 1967-1975 Located at the hand brake lever Used with switch BR7-040

Brake Compensator or Pressure Regulator

Brake compensator or pressure regulatorFIAT 124 Spider, Spider 2000 and Pininfarina 1966-1985FIAT 124 Sport Coupe - 1967-1975Located on the right side above the rear axle and is used to control the...

Brake Compensator or Regulator Boot

    Brake pressure regulator or compensator rubber bootFIAT 124 Spider, Sport Coupe, Spider 2000 and Pininfarina 1966-1985

Brake Compensator Linkage Kit - Save 10%

Brake compensator or pressure regulator linkage and bushing kitFIAT 124 Spider, Sport Coupe, Spider 2000 and Pininfarina 1966-1985 Save over 10%

Brake Compensator Linkage Rod Bushing

    Brake compensator linkage rod bushingFIAT 124 Spider, Sport Coupe, Spider 2000 and Pininfarina - 1966-1985 Located where the compensator linkage connects to the rear axle When...

Brake Compensator Linkage Bushing at Body

Brake compensator or pressure regulator linkage bushing at bodyFIAT 124 Spider, Spider 2000 and Pininfarina - 1966-1985FIAT 124 Sport Coupe - 1967-1975 1 required per car

Brake Compensator Bushing to Body Bracket

Brake compensator or pressure regulator bushing to body bracketFIAT 124 Spider, Spider 2000 and Pininfarina - 1966-1985FIAT 124 Sport Coupe - 1967-1975  

Brake Compensator Linkage

Brake compensator or pressure regulator linkage FIAT 124 Spider, Sport Coupe, Spider 2000 and Pininfarina - 1966-1985   Connects the rod to the rear axle   For the bushings in the...

Compensator Bushing Rod Sleeve

Brake compensator or pressure regulator linkage rod bushing inner sleeve or dowelFIAT 124 Spider, Spider 2000 and Pininfarina - 1966-1985FIAT 124 Sport Coupe - 1967-1975 2 required per car

Brake Compensator Linkage Rod Plate

Brake compensator or pressure regulator linkage rod plateFIAT 124 Spider, Sport Coupe, Spider 2000 and Pininfarina 1966-1985

Brake Compensator Linkage Rod Spacer

Brake compensator or pressure regulator linkage rod spacerFIAT 124 Spider, Spider 2000 and Pininfarina - 1966-1985FIAT 124 Sport Coupe - 1967-1975 Located inside the compensator  

Brake Compensator Linkage Rod - NOS

Brake compensator linkage rod - NOSFIAT 124 Spider, Spider 2000 and Pininfarina - 1966-1985FIAT 124 Sport Coupe - 1967-1975 Sometimes missing or damaged, the brake pressure regulator actuating rod is...

Brake Fluid Reservoir - 1966-69

Brake fluid reservoirFIAT 124 Spider, Sport Coupe and Sedan - 1966-1969   This is for the single circuit systems only   Also fits FIAT 500, 600, 850 and other FIAT

Clutch and or Brake Fluid Reservoir

Clutch or brake fluid reservoirFIAT and Bertone X1/9 - 1974-1988Lancia Scorpion, Montecarlo - 1976-1977   On the X1/9, this reservoir is used for the clutch fluid or 2 of these can be adapted to...

Front Wheel Bearing - 1979-88

Front wheel bearing FIAT and Bertone X1/9 - 1979-1988  

SKF Rear Wheel Bearing - 1979-88

Rear wheel bearing FIAT and Bertone X1/9 - 1979-1988Lancia Scorpion - 1976-1977 This is a premium SKF bearing

Rear Wheel Bearing Retainer - 1979-88

Rear wheel bearing retainer FIAT and Bertone X1/9 - 1979-1988Lancia Scorpion - 1976-1977  

Brake Fluid Reservoir - 1971-72

  Brake fluid reservoirFIAT 124 Spider and Sport Coupe 1971-1972 Features angled ports just like found originally on your 124 - unlike those available elsewhere

Brake Fluid Reservoir - 1977-85

Brake fluid reservoir FIAT 124 Spider, Spider 2000 and Pininfarina - 1977-1985 Can also be used on 1971-1976 models with the stock bracket and on 1968-70 with modifications to the bracket...

Wheel Bearing - 1974-78

Wheel bearing FIAT X1/9 - 1974-1978 - front and rear Lancia Scorpion (Montecarlo) - 1976-1977 - front only    

Brake Fluid Reservoir Retainer Clip - 1977-85

Brake fluid reservoir retainer clip FIAT 124 Spider and 2000 Spider - 1977-1985   These clips hold the brake reservoir to the mounting bracket   2 required per car    

Wheel Bearing Retainer - 1976-78

Wheel bearing retainer FIAT X1/9 - 1976-1978 - front and rear Lancia Scorpion (Montecarlo) - 1976-1977 - front only    

OEM Type Brake Fluid Reservoir Cap - Early

Brake fluid reservoir cap without electrical connectionsFIAT 124 Spider - 1966 to early 1977FIAT 124 Sport Coupe - 1967-1975FIAT X1/9 - 1974-1977Original style    

Brake Fluid Reservoir Cap - Late

Brake fluid reservoir cap with electrical contactsFIAT 124, Spider 2000 and Pininfarina - 1977-1985FIAT and Bertone X1/9 - 1977-1988

Brake Reservoir Cap Electric Contact Cover

Rubber cover for the electrical contacts on the brake fluid reservoir capFIAT 124, Spider 2000 and Pininfarina - 1977-1985  

Brake Fluid Reservoir Cap Insert - 1966-77

Brake fluid reservoir cap rubber insertFIAT 124 Spider - 1966-1977FIAT 124 Sport Coupe - 1967-1975 This fits the style cap which does not have electrical connections Seals cap and expands as brake...

Brake Fluid Hose - 1966-77

Brake fluid reservoir to master cylinder hoseFIAT 124 Spider, Sport Coupe - 1966 to middle of 1977 4mm ID braided hose Sold in approx. 27in (68.5cm) lengths Use clamps FI0-002 (need 4)

Braided Brake Fluid Hose - 1977-85

Braided brake fluid reservoir to master cylinder hoseFIAT 124 Spider, Spider 2000 and Pininfarina - mid 1977-1985 7.5mm ID braided hose, specifically designed for brake fluid use Sold by the foot...

Clamp for Brake Fluid Hose

Clamp for BR4-089 brake fluid hoseFIAT 124 Spider, Sport Coupe, Spider 2000 and Pininfarina - 1966-1985   12-14mm range Four required per car  For hose BR4-084 use clamp FI0-002

Speed Bleeder Bag and Hose Kit

Speed bleeder bag and hose kitFIAT 124 Spider, Spider 2000 and Pininfarina - 1966-1985FIAT 124 Sport Coupe - 1967-1975FIAT and Bertone X1/9 - 1974-1988 Used to collect spent brake fluid while...

Brake Booster Hose - Cloth Covered

Brake servo or booster hose FIAT 124 Spider, Sport Coupe, Spider 2000 and Pininfarina 1966-1985 Heavy-duty reinforced 12mm ID cloth braid covered - just like original Also works for the auxiliary...

Brake Booster Hose

Premium brake servo or booster hose FIAT 124 Spider, Sport Coupe, Spider 2000 and Pininfarina - 1966-1985   Sold by the foot, 30cm   Heavy-duty 15/32 (12mm) ID - manufactured by...

Accelerator Cable - 1975-77

Accelerator cableFIAT 124 Spider and Sport Coupe 1975 to early 1977 Attaches to drum on carburetor (to engine Number 572367)

Accelerator Cable - 1977-80 Carbureted

Accelerator cableFIAT 124 Spider and Spider 2000 - 1977-1980 Attaches to bell crank linkage on cam tower (from engine Number 572367)  

Accelerator Cable - 1980-85 Injected

Accelerator cableFIAT Spider 2000 and Pininfarina 1980-1985 with Bosch fuel Injection

Accelerator Cable for IDF conversion 1966-85

Accelerator cable with built-in return spring for IDF conversionsFIAT 124 Spider, Sport Coupe 1966-1985 On 1975-1985 Spiders, these will work with the stock gas pedal, but the rubber bumper on the...

Choke or Hand Throttle Cable

Choke or hand throttle cableFIAT 124 Spider and Sport Coupe 1966-1978 Original style choke cable can also be used as replacement hand throttle cable if shortened Mounts the same way as the...

Choke Cable Clip

Choke or hand throttle cable clipFIAT 124 Spider and Sport Coupe 1966-1978 Fits the original choke or hand throttle cables and it will also work for our CA1-400 cable.  Holds the cable...

Automatic Kick Down Cable - Carbureted

    Kickdown cableFIAT Spider 2000 - 1979-1980 (automatic transmission and carburetor)

Automatic Kick Down Cable - Injected

Kickdown cableFIAT Spider 2000 and Pininfarina - 1980-1985 (automatic transmission and Bosch fuel injection) An Auto Ricambi Exclusive - Not found anywhere else!

Accelerator Metal Cable Clip - 1966-80 - NOS

Accelerator linkage and throttle cable end metal clip - NOS FIAT 124 Spider and Spider 2000 - 1966-1980FIAT 124 Sport Coupe - 1967-1974FIAT and Bertone X1/9 - 1974-1988   Holds a cable end or...

Accelerator Plastic Cable Clip - 1966-80

Accelerator cable end plastic clip FIAT 124 Spider, Spider 2000 - 1966-1980 (carbureted) FIAT 124 Sport Coupe - 1967-1975 FIAT and Bertone X1/9 - 1974-1988   Replaces the original metal two...

Accelerator Linkage 3-Piece Rod End - 1966-80

Accelerator linkage 3-piece rod end FIAT 124 Spider and Spider 2000 - 1966-1980 (carbureted) FIAT 124 Sport Coupe - 1967-1975 FIAT and Bertone X1/9 - 1974-1988   Replaces the original metal two...

Accelerator Linkage Rod End - 1966-80

Accelerator linkage rod endFIAT 124 Spider and Spider 2000 - 1966-1980 (carbureted)FIAT 124 Sport Coupe - 1967-1975FIAT and Bertone X1/9 - 1974-1980 (carbureted)   Replaces the original metal...

Ball End - Carburetor Accelerator Linkage

Carburetor accelerator linkage ball and socket endFIAT 124 Spider, Spider 2000 and Pininfarina - 1966-1985FIAT 124 Sport Coupe - 1967-1975FIAT and Bertone X1/9 - 1974-1988 Fits all standard FIAT...

Accelerator Linkage Ball End - 6mm

Carburetor accelerator linkage ball and socket end   Ideal for making custom throttle linkages, hood or trunk props   6 x 1.00mm thread - Larger than stock FIAT throttle linkages

Cable Linkage Adaptor

Accelerator cable to carburetor linkage adaptor   Ideal for performance modifications

Ball and Socket End - Carburetor Accelerator Linkage

Carburetor accelerator linkage ball and socket end   Attaches on the end of a cable   Used when converting 1975-1977 124 Spiders to a DFEV or 34ADF carburetor

Accelerator Pedal Return Spring - 1979on

Accelerator pedal return springFIAT Spider 2000 and Pininfarina - 1979-1985  

Barrel Nut - Accelerator Cable

Accelerator cable barrel nut Installs on cable and can be locked in place with a set screw Ideal for linkage modifications

Universal Spring for Accelerator Linkages

Universal spring for accelerator linkages   Total length is 51mm (~2") For the holder use sku CA0-135

Spring Holder for Accelerator Linkages

Universal spring holder for accelerator linkages   Center to center between the holes is 42mm (~1-5/8") 8mm hole bolts to one of the carburetor studs, while the smaller hole is for the...