Hardware

Crankshaft Nut - 1971-83

Crankshaft Nut - 38 mmFIAT 124 Spider, Spider 2000 and Pininfarina - 1971-1983FIAT 124 Sport Coupe - 1971-1975

Crankshaft Bolt - 1983-85

Crankshaft pulley boltFIAT Pininfarina Spider - 1983-1985 Left hand thread

Cylinder Head Bolts Set - SAVE 10%

    Cylinder head bolts set of 10FIAT 124 Spider, Sport Coupe, Spider 2000 and Pininfarina - 1966-1985 Each engine requires 10 bolts - sold as a set Add new OEM head bolt washers EN5-466-Z  

Cylinder Head Bolt

Cylinder head boltFIAT 124 Spider, Sport Coupe, Spider 2000 and Pininfarina - 1966-1985 Each engine requires 10 bolts

Cylinder Head Bolt Washer - OEM Original

    Cylinder head bolt washerFIAT 124 Spider, Sport Coupe, Spider 2000 and Pininfarina 1966-1985 Each engine requires 10 bolts OEM Original Fiat part   Approved for use in Auto Ricambi performance engines

Ribe Cylinder Head Bolt Set

Cylinder head bolt set (ten bolts) FIAT 124 Spider, Spider 2000 and Pininfarina - 1966-1985 FIAT 124 Sport Coupe - 1967-1975   As found on the Pininfarina & Volumex Spider   Complete set of 10 Ribe head bolts   Ribe 12 tool required,...

Cylinder Head Bolt Tool - Ribe 12

  Cylinder head bolt toolFor use with FIAT 124 Spider, Sport Coupe, Spider 2000 and Pininfarina 1966-1985 For use with our EN5-468 Ribe 12 Head Bolt Kit Durable and made in the USA  

Exhaust Manifold Long Stud

Exhaust manifold long stud FIAT 124 Spider, Spider 2000 and Pininfarina - 1966-1985FIAT 124 Sport Coupe - 1967-1975 Approximately 55mm (2.16") long - The short threaded portion is 15mm long Normally used for the center stud, as it needs to accommodate...

Thread Insert - 8x1.25 Inside Thread

Thread insert - 8 x 1.25mm inside threads - 12 x 1.25mm outside threads - 15mm long Used to repair stripped holes, especially in cylinder heads  

Thread Insert - 6x1.0 Inside Threads

Thread insert - 6 x 1.0mm inside threads - 10 x 1.25mm outside threads - 14mm long Used to repair stripped holes, especially in cylinder heads    

Repair Stud - 8x1.25 to 10x1.50

Repair stud to replace 8mm studs   The threads on one side are 8 x 1.25mm, on the other 10 x 1.50mm   Total length 45mm, the 8mm diameter portion is 29mm long   Especially useful for repairing stripped cylinder head studs, just drill...

Oxygen Sensor Hole Plug

Oxygen sensor hole (bung) plug FIAT Spider 2000 and Pininfarina - 1979-1985   Used on our EX5-430 header when an oxygen sensor is not used Requires washer EX5-445

Exhaust Manifold Stud

    Exhaust manifold stud FIAT 124 Spider, Sport Coupe, Spider 2000 and Pininfarina - 1966-1985 Approximately 40mm (1.57") long

Oxygen Sensor Hole Plug Washer

Oxygen sensor hole plug copper washer FIAT Spider 2000 and Pininfarina - 1979-1985   Used on our EX5-430 header when an oxygen sensor is not used or for carbureted applications Used with plug EX5-444

Test Pipe Bolt

Bolt for test pipe or catalytic converterFIAT 124 Spider, Sport Coupe, Spider 2000 and Pininfarina Bolt for connecting the test pipe or catalytic converter to the downpipe and center muffler Need 8 bolts per car For the nuts use part EX4-062, for...

8 x 1.25mm Nut

    8x1.25mm nut - 13mm head FIAT 124 Spider, Sport Coupe, Spider 2000 and Pininfarina - 1966-1985   Found in various applications   For the 8mm lock washer use our part EN8-411    

Converter Nut Locking Plate - 1980-85

OEM exhaust nut locking plateFIAT Spider 2000 and Pininfarina - 1980-1985 Located at either end of the catalytic converter  

Hood Insulation Pad Clip - Coupe

Hood insulation pad or liner clipFIAT 124 Sport Coupe - 1967-1975   Used to secure the under-hood insulation liner on your Sport Coupe 21 clips required per car

Expansion Body Clip for License Plate

Expansion Body clip for license plate, door sill and hood trimFIAT 124 Spider, Spider 2000 and Pininfarina - 1966-1985FIAT 124 Sport Coupe - 1967-1975 Used to mount license plate, door sill and hood trim and installs in the square holes in the body Sold...

Convertible Top Frame Bolt - 10mm Hex

Convertible top frame boltFIAT 124 Spider, Spider 2000 and Pininfarina - 1966-1985 The main pivot bolt, works for both upper or lower - located close to the door jamb 10mm shank 8mm threads 6 point hex head  Uses 17mm wrench

Convertible Top Frame Bolt - 10mm Slotted

Convertible top slotted frame boltFIAT 124 Spider, Spider 2000 and Pininfarina - 1966-1985 Slotted bolt 10mm shank, 6mm long 8mm thread, 13mm long

Convertible Top Frame Bolt - 8mm Slotted

Convertible top slotted frame boltFIAT 124 Spider, Spider 2000 and Pininfarina - 1966-1985 Slotted bolt 8mm shank, 9mm long 6mm thread, 9mm long

Convertible Top Frame Bolt - 8mm

Convertible top frame boltFIAT 124 Spider, Spider 2000 and Pininfarina - 1966-1985 Holds the round bow that goes across above the occupant's head 8mm shank that is 4mm long M6 threads, which are 6mm long

Convertible Top Latch Screw

Convertible top latch screwFIAT 124 Spider, Spider 2000 and Pininfarina - 1966-1985 Fastens convertible top latch to the front bow of the convertible top frame Need four per car Sold individually

Plastic Screw Clip

Plastic screw clips or screw receiver FIAT 124 Spider, Sport Coupe, Spider 2000 and Pininfarina - 1970-1985 Various uses - Screw hole is 3mm in diameter

Lower Grill Mounting Assembly

Front lower grill mount & clip assemblyFIAT 124 Spider, Spider 2000 and Pininfarina - 1973-1985   2 required per grill

Front Turn Signal Bolt - 1975-on

Turn Signal BoltFIAT 124 Spider, Spider 2000 and Pininfarina - 1975-1985FIAT and Bertone X1/9 - 1976-1988 Located in the front turn signal housing, the male part holds the turn signal to the bumper, the female part holds the lens screw 2 required per...

6x1.00mm nut

6x1.00mm Nut - Various usesFIAT 124 Spider, Sport Coupe, Spider 2000 and Pininfarina - 1966-1985 FIAT 124 Sport Coupe - 1967-1975FIAT and Bertone X1/9 - 1974-1988    

6x1.00mm Wingnut

6x1.00mm Wing nut - various usesFIAT 124 Spider, Sport Coupe, Spider 2000 and Pininfarina - 1966-1985 FIAT 124 Sport Coupe - 1967-1975FIAT and Bertone X1/9 - 1974-1988 Commonly found on air cleaner assemblies and battery hold down brackets    

6mm Lock Washer

  6mm Lock WasherFIAT 124 Spider, Spider 2000 and Pininfarina 1968-1985 Various applications

NOS exhaust manifold EGR banjo bolt - 1974-78

NOS exhaust manifold EGR banjo boltFIAT 124 Spider - 1974-1978FIAT 124 Sport Coupe - 1974-1975 M16x30mm banjo bolt

Air Cleaner Stud and Nut

Air cleaner to carburetor stud and nutFIAT 124 Spider, Sport Coupe and Spider - 2000 1966-1980 (carbureted) M5 35mm overall length with the threaded portion at 22mm

Air Cleaner Repair Stud and Nut

Air cleaner to carburetor repair stud and nutFIAT 124 Spider, Sport Coupe and Spider 2000 - 1966-1980 (carbureted) Repair stud with both M5 and M6 threads 35mm overall length with the threaded portion at 22mm

Nut for Ball Stud

Nut for carburetor linkage stud FIAT 124 Spider, Sport Coupe and Spider 2000 - 1966-1980 (carbureted)   M5 threads

Carburetor Nut - 11mm hex

  Carburetor hold down nutFiat 124 Spider, Sport Coupe and Spider 2000 1966-1980 (carbureted) 11mm hex - 8x1.25mm thread This nut uses an 11mm wrench or socket to allow easier tightening in an area where clearance is restricted

Allen Hex Plug - 16x1.5mm

Aluminum hex plug - 16 x 1.5mm   Used on some intake manifolds  

Allen Hex Plug - 20x1.5mm

Aluminum hex plug - 20 x 1.5mm   Used on some intake manifolds and cylinder heads  

Allen Hex Plug - 22x1.5mm

Aluminum hex plug - 22 x 1.5mm   Used on some intake manifolds  

Allen Hex Plug - 24x1.5mm

Aluminum hex plug - 24 x 1.5mm   Used on some intake manifolds  

Intake Manifold & Head Hex Plug - 18x1.5mm

Aluminum intake manifold & cylinder head hex plug- 18x1.5mm Intake manifold plug for FIAT 124 Spider and Sport Coupe - 1974-1978Cylinder head port plug for Fiat Spider 2000 - 1979-1980 Carbureted Used to block the intake manifold temperature...

Fuel Sending Unit Nut

Fuel tank sending unit nut FIAT 124 Spider, Spider 2000 and Pininfarina - 1966-1985FIAT 124 Sport Coupe - 1967-1975 FIAT X1/9 - 1974-1980 (carbureted)     Sold individually - Need a total of 6 for each car

Steering Column Cover Screw

Steering column cover screwFIAT 124 Spider, Sport Coupe, Spider 2000 and Pininfarina - 1966-1985 Holds together the two halves of the steering column cover - Spiders use four screws

Door Lock Striker Retaining Screw

Door lock striker retaining screwsFIAT 124 Spider - 1966-1972FIAT and Bertone X1/9 - 1974-1988 These screws hold the door striker to the B pillar

14mm Suspension Nylock Nut

Suspension lock nutFIAT 124 Spider, Spider 2000 and Pininfarina - 1966-1985FIAT 124 Sport Coupe - 1967-1975 Commonly found on upper and lower A-arms and ball joints 14mm Nylock nut

Control Arm Pivot Washer

A-arm or control arm pivot washerFIAT 124 Spider, Spider 2000 and Pininfarina - 1966-1985FIAT 124 Sport Coupe - 1967-1975 Fits both upper and lower control arms

Lower Control Arm Inner Pivot Washer

Lower control arm inner pivot washerFIAT 124 Spider, Sport Coupe, Spider 2000 and Pininfarina - 1966-1985

Steering Wheel Nut

    Steering wheel nutFIAT 124 Spider, Sport Coupe, Spider 2000 and Pininfarina - 1966-1985 Requires a 24mm socket

Short Trailing Arm & Panhard Bolt

    Panhard rod and rear upper trailing arm rear boltFIAT 124 Spider, Sport Coupe, Spider 2000 and Pininfarina - 1966-1985 12x1.25mm threads Only for the right side of the panhard rod on late 1978-1985 Spiders For the nut use SU7-578 For...

Long Trailing Arm Bolt

Rear lower trailing arm boltFIAT 124 Spider, Sport Coupe, Spider 2000 and Pininfarina - 1966-1985 For the front or rear of the long trailing arms - Four total per car 12x1.25mm threads For the nut use SU7-578 For the lock washer use SU7-573

Trailing Arm Lock Washer

  Rear lower trailing arm lock washerFIAT 124 Spider, Sport Coupe, Spider 2000 and Pininfarina - 1966-1985 Located on all the bolts securing the rear trailing arms This washer also fits front lower a-arm to crossmember studs, bell housing to...

Trailing Arm Nut

    Rear trailing arm nutFIAT 124 Spider, Sport Coupe, Spider 2000 and Pininfarina - 1966-1985   Located on all the bolts securing the rear trailing arms   12x1.25mm threads Also fits front lower a-arm to crossmember studs and...

Spindle Nut - Left Front

Left front hub nutFIAT 124 Spider, Spider 2000 and Pininfarina - 1966-1985FIAT 124 Sport Coupe - 1967-1975 Renew these crimp-nuts each time one is removed This nut is also the 124 transmission layshaft nut