Tools

New Tool Kit

  Brand new tool box complete with all correct toolsFIAT 124 Spider, Spider 2000 and Pininfarina - 1966-1985FIAT 124 Sport Coupe - 1967-1975FIAT and Bertone X1/9 - 1974-1988 Ideal for concours restoration - very limited supply    

Clutch Alignment Tool

      Clutch alignment toolFIAT 124 Spider, Sport Coupe, Spider 2000 and Pininfarina 1966-1985

Valve Cover Bolt Tool

Custom billet valve cover bolt tool FIAT 124 Spider, Sport Coupe, Spider 2000 and Pininfarina - 1966-1985   Wrench for our custom billet valve cover bolts - 19mm   Does not fit stock valve cover bolts  

Valve Stem Height Tool

Valve stem height tool FIAT 124 Spider, Spider 2000 and Pininfarina - 1966-1985FIAT 124 Sport Coupe - 1967-1975   This tool is used to check that the valves are at the correct height after a valve job - If height exceed gauge, valve stem must be...

Valve Adjusting Tool

Valve shim adjusting toolFIAT 124 Spider, Spider 2000 and Pininfarina - 1966-1985FIAT 124 Sport Coupe - 1967-1975   This tool is used to hold down the shim bucket while the shim is replaced   Works even for the hard to reach #4 exhaust valve...

Valve Adjusting Tool - OEM ORIGINAL

    Valve shim adjusting toolFIAT 124 Spider, Sport Coupe, Spider 2000 and Pininfarina - 1966-1985   This tool is used to hold down the valve bucket while the shim is replaced   This is an OEM original FIAT factory tool

Oil Drain Plug Bolt Allen Wrench

Oil drain plug allen wrenchFIAT 124 Spider, Spider 2000 and Pininfarina - 1966-1985FIAT 124 Sport Coupe - 1967-1975 FIAT and Bertone X1/9 - 1974-1988   Tool handle length may vary Note: this tool does not work on the drain plugs installed in the new...

Cylinder Head Bolt Tool - Ribe 12

  Cylinder head bolt toolFor use with FIAT 124 Spider, Sport Coupe, Spider 2000 and Pininfarina 1966-1985 For use with our EN5-468 Ribe 12 Head Bolt Kit Durable and made in the USA  

Carburetor Synchronizer Tool

Carburetor synchronizer toolFIAT 124 Spider, Spider 2000 and Pininfarina - 1966-1980 (with IDF carburetors)FIAT 124 Sport Coupe - 1967-1975 (with IDF carburetors)FIAT and Bertone X1/9 - 1974-1980 (with DCNF or DCOE carburetors) A must for properly...

Front Control Arm Bushing Tool

    Front control arm bushing toolFIAT 124 Spider, Sport Coupe, Spider 2000 and Pininfarina - 1966-1985 Used to remove and replace both upper and lower front control arm bushings   See instructions here.

Rear Trailing Arm Bushing Sleeve Tool - 1968-78

    Rear trailing arm bushing sleeve tool FIAT 124 Spider, Sport Coupe, Spider 2000 and Pininfarina - 1968-1978 Used to install the sleeves into new hour glass style SU2-472 rear trailing arm bushings

Tie Rod End Removal Tool

Tie rod end removal toolFIAT 124 Spider, Spider 2000 and Pininfarina - 1966-1985FIAT 124 Sport Coupe - 1967-1975FIAT and Bertone X1/9 - 1974-1988

Spring Compressor

Spring compressor FIAT 124 Spider, Spider 2000, Pininfarina - 1966-1985FIAT Sport Coupe - 1967-1975   Single unit - can be used to replace front springs on the FIAT 124   Note: Compressed springs store a huge amount of energy!  If a...