Cables and Hardware

Engine Cover Cable

Engine cover cableFIAT and Bertone X1/9 - 1974-1988 1430/1180mm long

Speedometer Cable - 1979-88

Speedometer cableFIAT and Bertone X1/9 - 1979-1988 With clip-on speedometer connection

Speedometer Cable

Speedometer cableFIAT X1/9 - 1974-1978 Also fits 1979-1980 FIAT X1/9s with threaded speedometer connection One-piece cable

Parking Brake Cable

Parking brake cableFIAT and Bertone X1/9 - 1974-1988 Need two per car

Short Accelerator Cable - 1980-on with Fuel Injection

Short accelerator cableFIAT and Bertone X1/9 - 1980-1988 (with Bosch fuel injection)  

Accelerator Cable - 1979-88

Accelerator cableFIAT and Bertone X1/9 - 1979-1988 1930/880mm long

Accelerator Cable - 1974-78

Accelerator cableFIAT X1/9 - 1974-1978 1980/720mm long

Front trunk Cable - 1979-88

Front trunk cableFIAT and Bertone X1/9 - 1979-1988   910/725mm long

Rear Trunk Cable

Rear trunk cableFIAT and Bertone X1/9 - 1974-1988 1820/1700mm long

Accelerator Metal Cable Clip - 1966-80 - NOS

Accelerator linkage and throttle cable end metal clip - NOS FIAT 124 Spider and Spider 2000 - 1966-1980FIAT 124 Sport Coupe - 1967-1974FIAT and Bertone X1/9 - 1974-1988   Holds a cable end or rod end onto the ball stud   NOS (New Old...

Accelerator Plastic Cable Clip - 1966-80

Accelerator cable end plastic clip FIAT 124 Spider, Spider 2000 - 1966-1980 (carbureted) FIAT 124 Sport Coupe - 1967-1975 FIAT and Bertone X1/9 - 1974-1988   Replaces the original metal two piece socket and clip   For the metal version, see...

Accelerator Linkage 3-Piece Rod End - 1966-80

Accelerator linkage 3-piece rod end FIAT 124 Spider and Spider 2000 - 1966-1980 (carbureted) FIAT 124 Sport Coupe - 1967-1975 FIAT and Bertone X1/9 - 1974-1988   Replaces the original metal two piece socket and clip Three piece construction: ball,...

Accelerator Linkage Rod End - 1966-80

Accelerator linkage rod endFIAT 124 Spider and Spider 2000 - 1966-1980 (carbureted)FIAT 124 Sport Coupe - 1967-1975FIAT and Bertone X1/9 - 1974-1980 (carbureted)   Replaces the original metal two piece socket and clipM5x0.80 threads

Ball End - Carburetor Accelerator Linkage

Carburetor accelerator linkage ball and socket endFIAT 124 Spider, Spider 2000 and Pininfarina - 1966-1985FIAT 124 Sport Coupe - 1967-1975FIAT and Bertone X1/9 - 1974-1988 Fits all standard FIAT linkage rods and is ideal for performance modifications 5mm...

Accelerator Linkage Ball End - 6mm

Carburetor accelerator linkage ball and socket end   Ideal for making custom throttle linkages, hood or trunk props   6 x 1.00mm thread - Larger than stock FIAT throttle linkages

Cable Linkage Adaptor

Accelerator cable to carburetor linkage adaptor   Ideal for performance modifications

Universal Spring for Accelerator Linkages

Universal spring for accelerator linkages   Total length is 51mm (~2") For the holder use sku CA0-135

Barrel Nut - Accelerator Cable

Accelerator cable barrel nut Installs on cable and can be locked in place with a set screw Ideal for linkage modifications

Spring Holder for Accelerator Linkages

Universal spring holder for accelerator linkages   Center to center between the holes is 42mm (~1-5/8") 8mm hole bolts to one of the carburetor studs, while the smaller hole is for the spring For the spring, use sku CA0-120

Parking Brake Cable - Lancia Scorpion

Parking or hand brake cableLancia Scorpion (Montecarlo) - 1976-1977 Check out our video on how to install the parking brake cable  

Body Clip for Cable or Hose

Body clipFIAT 124 Spider, Spider 2000 and Pininfarina - 1966-1985FIAT 124 Sport Coupe - 1967-1975FIAT and Bertone X1/9 - 1974-1988 Commonly used on hood release cables and windshield washer hoses

Ball Stud for Carburetor Linkage

Carburetor linkage ball studFIAT 124 Spider and Spider - 2000 1966-1980 (carbureted)FIAT 124 Sport Coupe - 1967-1975FIAT and Bertone X1/9 - 1974-1988   M5 threads  Clip CA0-680 clips onto this to attach a cable or rod For the nut use our part...