Auto Ricambi

Cylinder Head Bolt Washer

Cylinder head bolt washerFIAT 124 Spider, Spider 2000 - 1966-1982FIAT 124 Sport Coupe - 1967-1975FIAT and Bertone X1/9 - 1980-1988   Each 124 engine requires 10 washers 10mm nominal inside...

Ribe Cylinder Head Bolt Set

Cylinder head bolt set (ten bolts) FIAT 124 Spider, Spider 2000 and Pininfarina - 1966-1985 FIAT 124 Sport Coupe - 1967-1975   As found on the Pininfarina & Volumex Spider   Complete...

Cylinder Head Bolt Tool - Ribe 12

  Cylinder head bolt toolFor use with FIAT 124 Spider, Sport Coupe, Spider 2000 and Pininfarina 1966-1985 For use with our EN5-468 Ribe 12 Head Bolt Kit Durable and made in the...

Center Muffler - Spider 1966-78

  Center muffler with two resonators FIAT 124 Spider 1966-1978 (without catalytic converter) For 1974-1978 California models with a catalytic converter use EX7-483 Use clamp...

Performance Center Muffler - Spider 1966-78

      Large diameter center muffler with one resonatorFIAT 124 Spider 1966-1978 (without catalytic converter) Featuring a 50mm (~2") diameter - this is an easy way to improve the...

Center Muffler - 1974-80 - Carbureted with Catalytic Converter

Center muffler or resonatorFIAT Spider 2000 1979-1980 (carbureted)FIAT 124 Spider 1974-1978 (California models with catalytic converter) 3 bolt flange

Center Muffler - 1980-85 with Fuel Injected

Center muffler or resonatorFIAT Spider 2000 and Pininfarina 1980-1985 (fuel injected) 4 bolt flange

Center Muffler - Sport Coupe 1967-75

Center muffler or resonatorFIAT 124 Sport Coupe 1967-1975 (except California models with converter)

Performance Center Muffler - Sport Coupe 1967-75

Performance center muffler with one resonatorFIAT 124 Sport Coupe 1967-1975 (except California models with converter) These 50mm (~2") diameter resonators were originally on the European version of...

Rear Muffler - Spider 1966-78

Rear muffler with small chrome tip FIAT 124 Spider 1966-1978 Add hangers EX4-459 and hanger brackets EX4-457 if needed (two per muffler)  

Performance Rear Muffler - Spider 1966-85

Performance rear muffler FIAT 124 Spider, Spider 2000 and Pininfarina - 1966-1985 This 50mm (~2") pipe diameter is an inexpensive way to upgrade to a straight-through performance muffler For use...

Bolt-on Chrome Tip for Rear Muffler

Bolt-on chrome tip for rear mufflersFIAT 124 Spider, Spider 2000 and Pininfarina - 1966-1985   This tip was designed for our EX8-427-Z and EX8-428 rear mufflers The muffler's outlet pipe must...

Rear Muffler - Spider 1979-85

Rear mufflerFIAT Spider 2000 and Pininfarina - 1979-1985    This muffler no longer requires the additional metal muffler hanger brackets For rubber muffler hangers use EX4-459...

Rear Muffler - Sport Coupe 1967-75

Rear mufflerFIAT 124 Sport Coupe 1967-1975  

Performance Rear Muffler - Sport Coupe 1967-75

Performance rear muffler FIAT 124 Sport Coupe 1967-1975 This 50mm (~2") pipe diameter rear muffler is an inexpensive way to upgrade to a straight-through performance muffler For use with...

Rear and Center Muffler Kit - Spider 1966-78

Rear and center mufflers with clampFIAT 124 Spider 1966-1978 (except models with catalytic converter) Kit includes: EX7-423 center muffler with two resonators EX8-427 rear muffler with single chrome...

Rear and Center Muffler Kit - Spider 1979-80

Rear and center mufflers with clampFIAT Spider 2000 - 1979-1980 - Carbureted Kit includes: EX7-483 center muffler (three bolt flange) EX8-428 rear muffler EX4-035 clamp Add hangers EX4-459 if...

Rear and Center Muffler Kit - Spider 1980-85

Rear and center mufflers with clampFIAT Spider 2000, Pininfarina - 1980-1985 - with fuel injection Kit includes: EX7-425 center muffler (with four bolt flange) EX8-428 rear muffler EX4-035...

Performance Rear and Center Muffler Kit - Spider 1966-78

High-performance rear and center mufflers with clampFIAT 124 Spider - 1966-1978 (except models with catalytic converter) Kit includes: EX7-423-Z 50mm (2") center muffler with one resonator EX8-427-Z...

Abarth Style Stainless Steel Header - 1971-78

    Stainless steel Abarth style header - inspired by those used on the World Rally Championship 124 Spider CSAFIAT 124 Spider and Sport Coupe - 1600 & 1800 - 1971-1978 (without...

Abarth Style Stainless Steel Header - 1979-85

Stainless Steel Abarth style header - Inspired by those used on the World Rally Championship 124 Spider CSA, but with a modified downpipe to fit the Spider 2000. FIAT Spider 2000 and Pininfarina -...

Down Pipe - 1966-72

      Exhaust downpipeFIAT 124 Spider and Sport Coupe 1966-1972 (1438 and 1608cc) Extends from the exhaust manifold to center muffler For the downpipe holder bracket, use part EX4-015

Sedan Down Pipe - 1966-73

Exhaust downpipeFIAT 124 Sedan and Wagon 1966-1973 (1197 and 1438cc OHV) Extends from the exhaust manifold to center muffler For the downpipe gasket, use part 9GA474

Down Pipe - 1973-74

      Exhaust downpipeFIAT 124 Spider and Sport Coupe 1973-1974 (1592 and 1756cc) Will fit 1975-78 Spiders is a dual outlet manifold is used EX5-412 Extends from the exhaust manifold...

Down pipe - Spider 1974-80 - Carbureted with Converter

Exhaust downpipeFIAT Spider and Sport Coupe 1974-1980 (carbureted models with catalytic converter) Single pipe, connects to single outlet exhaust manifold and has 3-bolt flange to connect to the...

Down Pipe - 1980-85 with Fuel Injection

Exhaust downpipeFIAT Spider 2000 and Pininfarina 1980-1985 with fuel injection  Extends from exhaust manifold to catalytic converter For Spiders with rack and pinion steering...

Down Pipe - Pininfarina 1985 1/2 only

Exhaust downpipeFIAT Pininfarina 1985 1/2 only (with rack and pinion steering) Extends from the exhaust manifold to the catalytic converter For Spiders without rack and pinion steering, see...

Turbo Exhaust Manifold

Turbo exhaust manifoldFiat 124 Spider, Spider 2000, Pininfarina - 1968-1985 FIAT 124 Sport Coupe - 1967-1975   Cast iron exhaust manifold to be used for mounting a Garrett T3 turbo - Will not...

Exhaust Manifold - 1968-78

  New 2 outlet exhaust manifold Fiat 124 Sport Coupe and Spider - 1966-1974   Use down pipe EX5-470 or EX5-474 depending on engine and gasket GA4-473   Can be used to upgrade...

Exhaust Manifold - 1980-85 EFI

New 2-outlet exhaust manifold Fiat Spider 2000 and Pininfarina - 1980-1985 (with Bosch injection)   Use down pipe EX5-480 or EX5-487 , depending on steering Use downpipe gaskets...

Exhaust Manifold Long Stud

Exhaust manifold long stud FIAT 124 Spider, Spider 2000 and Pininfarina - 1966-1985FIAT 124 Sport Coupe - 1967-1975 Approximately 55mm (2.16") long - The short threaded portion is 15mm long Normally...

Exhaust Manifold Stud

    Exhaust manifold stud FIAT 124 Spider, Sport Coupe, Spider 2000 and Pininfarina - 1966-1985 Approximately 40mm (1.57") long

Oxygen Sensor Hole Plug

Oxygen sensor hole (bung) plug FIAT Spider 2000 and Pininfarina - 1979-1985   Used on our EX5-430 header when an oxygen sensor is not used Requires washer EX5-445

Repair Stud - 8x1.25 to 10x1.50

Repair stud to replace 8mm studs   The threads on one side are 8 x 1.25mm, on the other 10 x 1.50mm   Total length 45mm, the 8mm diameter portion is 29mm long   Especially useful...

Thread Insert - 6x1.0 Inside Threads

Thread insert - 6 x 1.0mm inside threads - 10 x 1.25mm outside threads - 14mm long Used to repair stripped holes, especially in cylinder heads    

Thread Insert - 8x1.25 Inside Thread

Thread insert - 8 x 1.25mm inside threads - 12 x 1.25mm outside threads - 15mm long Used to repair stripped holes, especially in cylinder heads  

Oxygen Sensor Hole Plug Washer

Oxygen sensor hole plug copper washer FIAT Spider 2000 and Pininfarina - 1979-1985   Used on our EX5-430 header when an oxygen sensor is not used or for carbureted applications Used...

Catalytic Converter - 1974-80

3-bolt style catalytic converterFIAT 124 Spider and Spider 2000 1974-1980 (carbureted federal models) NOT LEGAL for use or sale in California, Colorado, New York or Maine For the flange gaskets use...

Catalytic Converter 1980-85 - 49 States

4-bolt catalytic converterFIAT Spider 2000 and Pininfarina 1980-1985 (fuel injected 49-state models) Flanges do not use a gasket For California models see EX6-468 Use two of...

Catalytic Converter - 1980-85 California

4-bolt catalytic converter (California CARB compliant)FIAT Spider 2000 and Pininfarina - 1980-1985 (fuel injected) For 49-state models see EX6-467 Use two of these springs for hangers:...

Test Pipe - 1975-80 - 3 bolt

3-bolt test pipeFIAT 124 and Spider 20001975-1979 California models1979-1980 49-state carbureted models Bolts in place of the catalytic converter for testing purposes Fits 1979-80 (Carb) for...

3 Bolt Flange

3-bolt flange - located at catalytic converterFIAT 124 and Spider 2000  1975-1979 California models  1979-1980 49-state carbureted models Exhaust pipe flange to connect to the catalytic...

Air pump - Fiat 124 -1974-80

Air or smog pumpFIAT 124 Spider, Spider 2000 - 1974-1980FIAT 124 Sport Coupe - 1974-1975 This product requires a refundable $99.99 core chargeSend us your like rebuildable core for a refundAll cores...

Test Pipe - 1980-85 - 4 bolt

4-bolt test pipeFIAT Spider 2000 and Pininfarina 1980-1985 (with fuel injection) Bolts in place of the catalytic converter for testing purposes Not legal for use on pollution-controlled motor...

4 Bolt Flange

4-bolt flange - located at converterFIAT Spider 2000 and Pininfarina - 1980-1985 (with fuel injection) Four-bolt exhaust pipe flange to connect to the catalytic converter  

Test Pipe Bolt

Bolt for test pipe or catalytic converterFIAT 124 Spider, Sport Coupe, Spider 2000 and Pininfarina Bolt for connecting the test pipe or catalytic converter to the downpipe and center muffler Need 8...

Muffler Hanger

Rear muffler hanger FIAT 124 Spider, Spider 2000 and Pininfarina - 1966-1985FIAT 124 Sport Coupe - 1967-1975   Stop the rattling with our quality OE style rear exhaust hanger Each muffler...

Muffler Hanger Bolt

Rear muffler hanger bolt FIAT 124, Spider 2000 and Pininfarina - 1966-1985   Attaches rubber muffler hanger to the bracket Four bolts needed per car For the nut, use part number...

Muffler Hanger Bracket

Rear muffler hanger metal bracket FIAT 124 Spider, Spider 2000 and Pininfarina - 1966-1985FIAT 124 Sport Coupe - 1967-1975   This piece attaches the rubber hanger (EX4-459) to the muffler Two...

Catalytic Converter Spring

Catalytic converter mounting springFIAT 124 Spider, Sport Coupe, Spider 2000 and Pininfarina 1975-1985 Two required per converter

Hanger for ANSA Rear Muffler

ANSA recommended hanger for use with EX8-428-Z High-Performance muffler This hanger hooks onto an exhaust clamp, so clamp EX4-035 needs to be ordered as well This will add years of enjoyment to...

Sedan Muffler Hanger

Rear muffler hanger FIAT 124 Sedan and Wagon - 1966-1974