Auto Ricambi

Down Pipe - 1980-85 with Fuel Injection

Exhaust downpipeFIAT Spider 2000 and Pininfarina 1980-1985 with fuel injection  Extends from exhaust manifold to catalytic converter For Spiders with rack and pinion steering...

Down Pipe - Pininfarina 1985 1/2 only

Exhaust downpipeFIAT Pininfarina 1985 1/2 only (with rack and pinion steering) Extends from the exhaust manifold to the catalytic converter For Spiders without rack and pinion steering, see...

Turbo Exhaust Manifold

Turbo exhaust manifoldFiat 124 Spider, Spider 2000, Pininfarina - 1968-1985 FIAT 124 Sport Coupe - 1967-1975   Cast iron exhaust manifold to be used for mounting a Garrett T3 turbo - Will not...

Exhaust Manifold - 1968-78

  New 2 outlet exhaust manifold Fiat 124 Sport Coupe and Spider - 1966-1974   Use down pipe EX5-470 or EX5-474 depending on engine and gasket GA4-473   Can be used to upgrade...

Exhaust Manifold - 1980-85 EFI

New 2-outlet exhaust manifold Fiat Spider 2000 and Pininfarina - 1980-1985 (with Bosch injection) Use down pipe EX5-480 or EX5-487 , depending on steering

Exhaust Manifold Long Stud

Exhaust manifold long stud FIAT 124 Spider, Spider 2000 and Pininfarina - 1966-1985FIAT 124 Sport Coupe - 1967-1975 Approximately 55mm (2.16") long - The short threaded portion is 15mm long Normally...

Exhaust Manifold Stud

    Exhaust manifold stud FIAT 124 Spider, Sport Coupe, Spider 2000 and Pininfarina - 1966-1985 Approximately 40mm (1.57") long

Oxygen Sensor Hole Plug

Oxygen sensor hole (bung) plug FIAT Spider 2000 and Pininfarina - 1979-1985   Used on our EX5-430 header when an oxygen sensor is not used Requires washer EX5-445

Repair Stud - 8x1.25 to 10x1.50

Repair stud to replace 8mm studs   The threads on one side are 8 x 1.25mm, on the other 10 x 1.50mm   Total length 45mm, the 8mm diameter portion is 29mm long   Especially useful...

Thread Insert - 6x1.0 Inside Threads

Thread insert - 6 x 1.0mm inside threads - 10 x 1.25mm outside threads - 14mm long Used to repair stripped holes, especially in cylinder heads    

Thread Insert - 8x1.25 Inside Thread

Thread insert - 8 x 1.25mm inside threads - 12 x 1.25mm outside threads - 15mm long Used to repair stripped holes, especially in cylinder heads  

Oxygen Sensor Hole Plug Washer

Oxygen sensor hole plug copper washer FIAT Spider 2000 and Pininfarina - 1979-1985   Used on our EX5-430 header when an oxygen sensor is not used or for carbureted applications Used...

Catalytic Converter - 1974-80

3-bolt style catalytic converterFIAT 124 Spider and Spider 2000 1974-1980 (carbureted federal models) NOT LEGAL for use or sale in California, Colorado, New York or Maine For the flange gaskets use...

Catalytic Converter 1980-85 - 49 States

4-bolt catalytic converterFIAT Spider 2000 and Pininfarina 1980-1985 (fuel injected 49-state models) Flanges do not use a gasket For California models see EX6-468 Use two of...

Catalytic Converter - 1980-85 California

4-bolt catalytic converter (California CARB compliant)FIAT Spider 2000 and Pininfarina - 1980-1985 (fuel injected) For 49-state models see EX6-467 Use two of these springs for hangers:...

Test Pipe - 1975-80 - 3 bolt

3-bolt test pipeFIAT 124 and Spider 20001975-1979 California models1979-1980 49-state carbureted models Bolts in place of the catalytic converter for testing purposes Fits 1979-80 (Carb) for...

3 Bolt Flange

3-bolt flange - located at catalytic converterFIAT 124 and Spider 2000  1975-1979 California models  1979-1980 49-state carbureted models Exhaust pipe flange to connect to the catalytic...

Air pump - Fiat 124 -1974-80

Air or smog pumpFIAT 124 Spider, Spider 2000 - 1974-1980FIAT 124 Sport Coupe - 1974-1975 This product requires a refundable $99.99 core chargeSend us your like rebuildable core for a refundAll cores...

Test Pipe - 1980-85 - 4 bolt

4-bolt test pipeFIAT Spider 2000 and Pininfarina 1980-1985 (with fuel injection) Bolts in place of the catalytic converter for testing purposes Not legal for use on pollution-controlled motor...

4 Bolt Flange

4-bolt flange - located at converterFIAT Spider 2000 and Pininfarina - 1980-1985 (with fuel injection) Four-bolt exhaust pipe flange to connect to the catalytic converter  

Test Pipe Bolt

Bolt for test pipe or catalytic converterFIAT 124 Spider, Sport Coupe, Spider 2000 and Pininfarina Bolt for connecting the test pipe or catalytic converter to the downpipe and center muffler Need 8...

Muffler Hanger

Rear muffler hanger FIAT 124 Spider, Spider 2000 and Pininfarina - 1966-1985FIAT 124 Sport Coupe - 1967-1975   Stop the rattling with our quality OE style rear exhaust hanger Each muffler...

Muffler Hanger Bolt

Rear muffler hanger bolt FIAT 124, Spider 2000 and Pininfarina - 1966-1985   Attaches rubber muffler hanger to the bracket Four bolts needed per car For the nut, use part number...

Muffler Hanger Bracket

Rear muffler hanger metal bracket FIAT 124 Spider, Spider 2000 and Pininfarina - 1966-1985FIAT 124 Sport Coupe - 1967-1975   This piece attaches the rubber hanger (EX4-459) to the muffler Two...

Catalytic Converter Spring

Catalytic converter mounting springFIAT 124 Spider, Sport Coupe, Spider 2000 and Pininfarina 1975-1985 Two required per converter

Hanger for ANSA Rear Muffler

ANSA recommended hanger for use with EX8-428-Z High-Performance muffler This hanger hooks onto an exhaust clamp, so clamp EX4-035 needs to be ordered as well This will add years of enjoyment to...

Sedan Muffler Hanger

Rear muffler hanger FIAT 124 Sedan and Wagon - 1966-1974  

Muffler Clamp - 1966-78

  Exhaust clampFIAT 124 Spider and Sport Coupe 1966-1978 with stock type mufflers Used at the junction of the center and rear mufflers

Muffler Clamp - 1979-85

    Exhaust clampFIAT Spider 2000, Pininfarina Spider 1979-1985 with stock type mufflers Used at the junction of the center and rear mufflers Also works for the front junction of...

Muffler clamp for EX8-427-Z muffler

Exhaust Clamp for EX8-427-Z rear muffler (only)FIAT 124 Spider, Sport Coupe, Spider 2000 and Pininfarina 1966-1985 This clamp will not fit any of our other mufflers Used at the junction of the center...

Downpipe Clamp - 1975-80

  Exhaust clamp set for single down pipe exhaust systemFIAT 124 Spider, Sport Coupe and Spider 2000 1975-1980 Complete with hardware Clamps the down pipe to the exhaust manifold

8 x 1.25mm Nut

    8x1.25mm nut - 13mm head FIAT 124 Spider, Sport Coupe, Spider 2000 and Pininfarina - 1966-1985   Found in various applications   For the 8mm lock washer use our part...

Front Exhaust Bracket - 1966-78

    Front exhaust bracketFIAT 124 Spider and Sport Coupe - 1966-1978 (except 1975-on California models equipped with catalytic converter)   Attaches to the rear of the transmission and...

Front Exhaust Bracket - 1979-85

Front exhaust bracketFIAT Spider 2000 and Pininfarina 1979-1985 with 5-speed transmission Also fits 1975-on California models with catalytic converter Attaches to the transmission bellhousing

Front Exhaust Bracket - 1985 1/2

Front exhaust bracketFIAT Pininfarina Spider 1985 1/2 only - with rack and pinion steering   Attaches to the bellhousing  

Exhaust Nut Locking Plate - 1966-79

OEM exhaust nut locking plate at manifoldFIAT 124 and Spider 2000 - 1966-1979FIAT Sport Coupe - 1967-1975 Located where exhaust mandifold meets the down pipe    

Converter Nut Locking Plate - 1980-85

OEM exhaust nut locking plateFIAT Spider 2000 and Pininfarina - 1980-1985 Located at either end of the catalytic converter  

Red Enamel Bronze Wreath Emblem

Red enamel bronze wreath FIAT emblemFIAT 124 Spider - 1966-1974 (can be fitted to all years) FIAT 124 Sport Coupe  - 1967-1972FIAT X1/9 - 1974-1982   Brighten your classic Fiat's...

NOS Original Wreath Emblem

OEM original FIAT wreath emblem FIAT 124 Spider and Spider 2000 - 1975-1982FIAT X1/9 - 1974-1982   OEM Original new old stock (NOS) emblem The badge securely mounts with two emblem clips...

Sport Coupe Emblem - 1973-75 - NOS

Sport Coupe FIAT wreath emblem - NOSFIAT 124 Sport Coupe - 1973-1975   Original 72mm emblem (about 3") The rear mounting stud location is offset (see photo) These are New Old Stock (~50 yrs...

Hood or Trunk Emblem Gasket

Hood or trunk emblem rubber base gasket FIAT 124 Spider - 1966-1974  Located under the front and the trunk emblem Can be used on all years Sold individually

Front Emblem Surround - 1970-74

Front chrome emblem surroundFIAT 124 Spider - 1970 to early 1974 Attaches to the front grille

Front Emblem Surround Gasket - 1970-74

Front chrome emblem surround gasketFIAT 124 Spider - 1970 to early 1974 Fits between emblem and surround OEM New Old Stock

Pininfarina Front Emblem - 1983-84

Pininfarina front emblemFIAT Pininfarina Spider - 1983-1984

Pininfarina Front Emblem - 1984-85

      Pininfarina front emblemFIAT Pininfarina Spider - 1984-1985 This is an original metal emblem with the Pininfarina Script

Pininfarina Azzurra Rear Emblem - 1983-85

Pininfarina rear emblem - Azzurra sailboat FIAT Pininfarina Spider - 1983-1985   Located on the trunk

Side Emblem - 1966-74

Pininfarina side emblemFIAT 124 Spider - 1966-1974 Bolt on style Excellent attention to detail Also fits all 124 Spiders and Spider 2000's through 1982

Side Emblem - 1975-82

Pininfarina side emblemFIAT 124 Spider and Spider 2000 - 1975-1982 This exact reproduction is a long-lasting enamel on metal emblem, not a cheap plastic one. Press-on installation, using two OEM...

Rubber Side Emblem Gasket

Pininfarina molded rubber side emblem gasket FIAT Spider 2000 - 1979-1982   Exactly like original - a nice addition to early Spiders   Fits all years  

Pininfarina Side Emblem - 1983-85

Pininfarina side emblemFIAT Pininfarina Spider - 1984-1985 Script style Pininfarina emblem Can also be used on 1983 Pininfarina Spiders  

Spidereuropa Dash Plaque

Spidereuropa badge (dash plaque)FIAT Pininfarina Spider - 1983-1985 "Spider Pininfarina" badge, original on the European versions of the Spider (Spider Europa)  

124 Sport Rear Emblem - 1966-72

      Chrome metal '124 Sport' rear emblemFIAT 124 Spider - 1966-1972