Master Cylinder Boosters and Regulators

Brake Master Cylinder - 1966-67

Brake master cylinderFIAT 124 Spider, Sport Coupe 1966-1967 For single circuit brake system only    

Brake Master Cylinder - 1968 to late 1977

Brake master cylinder FIAT 124 Spider - 1968 to late 1977 FIAT 124 Sport Coupe - 1968-1975   Master cylinders include 4mm plastic spouts - verify size before ordering   For the brake booster, order sku BR8-490    

Brake Master Cylinder - late 1977on

Brake master cylinder FIAT 124 Spider, Spider 2000 and Pininfarina - late 1977-1985   Master cylinders include 7mm plastic spouts - verify size before ordering   For the brake booster, order sku BR8-490    

Brake Master Cylinder - Volumex

Brake master cylinderFIAT 124 Spider 1984-1985 Volumex  This Italian made brake master cylinder only fits FIAT 124 Volumex models  

Brake Master Cylinder Spout - 1966-77

Brake master cylinder inlet spoutFIAT 124 Spider and Sport Coupe - 1966 to early 1977 For 4mm ID hose

Brake Master Cylinder Spout - 1977-85

Brake master cylinder inlet spoutFIAT 124 Spider, Spider 2000 and Pininfarina - mid 1977-1985 For 7mm ID hose Note: angle may vary from picture

Brake Booster - Auto Ricambi Special

New brake servo FIAT 124, Spider, Sport Coupe, Spider 2000 and Pininfarina - 1966-1985 Auto Ricambi had these brake boosters specially manufactured to the highest possible standard. Our booster will restore braking confidence and ensure years of...

Performance Master Cylinder and Booster

Upgraded High Performance brake master cylinder and booster assemblyFIAT 124 Spider, Spider 2000 and Pininfarina - 1966-1985FIAT 124 Sport Coupe - 1967-1975   As originally used on the supercharged Volumex Spiders - A larger booster and larger...

Brake Booster Check Valve - 1976-85

Brake booster plastic check valveFIAT 124 Spider, Spider 2000 and Pininfarina 1976-1985 Fitted to the booster using rubber grommet as original

Brake Booster Check Valve Grommet - 1976-85

Brake booster check valve rubber grommetFIAT 124 Spider, Spider 2000 and Pininfarina - 1976-1985 Used to secure the check valve to the booster

Brake Booster Check Valve - 1966-75

Brake booster banjo check valveFIAT 124 Spider and Sport Coupe 1966-1975

Brake Booster and Vacuum Hose Fitting in Manifold

Brake booster hose and vacuum line fitting in intake manifoldFIAT 124 Spider, Sport Coupe, Spider 2000 and Pininfarina 1966-1985 This fitting has one port for the brake booster hose and another for a small vacuum hose  

Brake Booster Hose Fitting in Manifold

Brake booster hose fitting in intake manifold FIAT 124 Spider, Sport Coupe, Spider 2000 and Pininfarina - 1966-1985 This fitting has straight threads, and will need thread locker (lock-tite) to seal and keep in place  

Brake Fluid Low Pressure Indicator - 1968-76

Brake fluid low pressure indicator block FIAT 124 Spider and Sport Coupe 1966 to early 1976   Up to Spares Number 1448208 in mid-1976   Not for vehicles with higher spares numbers (late 1976 and 1977)

Brake Compensator or Pressure Regulator

Brake compensator or pressure regulatorFIAT 124 Spider, Spider 2000 and Pininfarina 1966-1985FIAT 124 Sport Coupe - 1967-1975Located on the right side above the rear axle and used to control the brake pressure to the rear brakes Don't forget to replace...

Brake Compensator or Regulator Boot

    Brake pressure regulator or compensator rubber bootFIAT 124 Spider, Sport Coupe, Spider 2000 and Pininfarina 1966-1985

Brake Compensator Linkage Kit - Save 10%

Brake compensator or pressure regulator linkage and bushing kitFIAT 124 Spider, Sport Coupe, Spider 2000 and Pininfarina 1966-1985 Save over 10%

Brake Compensator Linkage Rod Bushing

    Brake compensator linkage rod bushingFIAT 124 Spider, Sport Coupe, Spider 2000 and Pininfarina - 1966-1985 Located where the compensator linkage connects to the rear axle When servicing brake components, don't take short cuts. Renewing...

Brake Compensator Linkage Bushing at Body

Brake compensator or pressure regulator linkage bushing at bodyFIAT 124 Spider, Spider 2000 and Pininfarina - 1966-1985FIAT 124 Sport Coupe - 1967-1975 1 required per car

Brake Compensator Bushing to Body Bracket

Brake compensator or pressure regulator bushing to body bracketFIAT 124 Spider, Spider 2000 and Pininfarina - 1966-1985FIAT 124 Sport Coupe - 1967-1975  

Brake Compensator Linkage

Brake compensator or pressure regulator linkage FIAT 124 Spider, Sport Coupe, Spider 2000 and Pininfarina - 1966-1985   Connects the rod to the rear axle   For the bushings in the ends, use our part BR0-479  

Compensator Bushing Rod Sleeve

Brake compensator or pressure regulator linkage rod bushing inner sleeve or dowelFIAT 124 Spider, Spider 2000 and Pininfarina - 1966-1985FIAT 124 Sport Coupe - 1967-1975 2 required per car

Brake Compensator Linkage Rod Plate

Brake compensator or pressure regulator linkage rod plateFIAT 124 Spider, Sport Coupe, Spider 2000 and Pininfarina 1966-1985

Brake Compensator Linkage Rod Spacer

Brake compensator or pressure regulator linkage rod spacerFIAT 124 Spider, Spider 2000 and Pininfarina - 1966-1985FIAT 124 Sport Coupe - 1967-1975 Located inside the compensator  

Brake Compensator Linkage Rod - NOS

Brake compensator linkage rod - NOSFIAT 124 Spider, Spider 2000 and Pininfarina - 1966-1985FIAT 124 Sport Coupe - 1967-1975 Sometimes missing or damaged, the brake pressure regulator actuating rod is an often overlooked part of a full brake service. OEM...

Brake Booster Hose - Cloth Covered

Brake servo or booster hose FIAT 124 Spider, Sport Coupe, Spider 2000 and Pininfarina 1966-1985 Heavy-duty reinforced 12mm ID cloth braid covered - just like originalAlso works for the auxiliary air valve Select the quantity that equals the number...

Brake Booster Hose

Premium brake servo or booster hose FIAT 124 Spider, Sport Coupe, Spider 2000 and Pininfarina - 1966-1985   Sold by the foot, 30cm   Heavy-duty 15/32 (12mm) ID - manufactured by Gates Also works for the auxiliary air valve...