New Products

Indoor Car Cover with FIAT Logo

Red indoor car cover with FIAT logoFIAT 124 Spider, Spider 2000 and Pininfarina - 1966-1985 Perfect to protect the car while being stored indoors Complete with nice carrying tote Note: Logo not shown in pictures, but wreath FIAT logo is on the front of...

Bertone Replacement Emblem

Bertone replacement emblem decal (metal domed decal)Bertone X1/9 - 1983-1988 This metal domed decal is a great and cost-effective way to update your old, faded Bertone emblems The original plastic base from the car must be reused Easy-to-follow...

Performance Coolant System Air Bleed Tee

Performance aluminum coolant air bleed T-fitting FIAT 124 Spider, Spider 2000 and Pininfarina - 1966-1985 FIAT 124 Sport Coupe - 1967-1975   Installs at the highest point of the long heater hose A simple and effective way to remove the air trapped...

Turbo Decal Kit - 1981-82

Turbo decal kit - OEM StyleFIAT Spider 2000 Turbo - 1981-1982 (with Legends Industries turbo) Finally, a faithful and accurate reproduction of the Legend Industries complete turbo stripe kit. Choose from three available stock colors. This kit also...

Fine Thread Brake Line Nut

Fine-thread metal brake line nutFIAT 124 Spider, Spider 2000 and Pininfarina - 1966-1985FIAT 124 Sport Coupe - 1967-1975   ONLY fits the brake junction box under the master cylinder on 1966-1977 124s and Volumex master cylinders  

Brake Light Switch Pad

Parking brake light switch padFIAT 124 Spider, Spider 2000 and Pininfarina - 1970-1985 Located at the hand brake lever

Parking Brake Cable Heat Shield

Parking or hand brake cable heat shieldFIAT 124 Spider, Spider 2000 and Pininfarina - 1966-1985FIAT 124 Sport Coupe - 1967-1975 Used on the passenger side of the parking brake cable to prevent exhaust heat damage

Radiator Fan Switch Washer

Radiator fan switch sealing washerFIAT 124 Spider, Spider 2000 and Pininfarina - 1966-1985FIAT 124 Sport Coupe - 1967-1975FIAT and Bertone X1/9 - 1974-1988 If you remove and reinstall your radiator fan switch this should be replaced

High Performance Racing Clutch Kit

High-performance racing clutch kit with puck-style discFIAT 124 Spider, Spider 2000 and Pininfarina - 1971-1985 (1608, 1592, 1756 and 1995cc)FIAT 124 Sport Coupe - 1971-1975 (1608, 1592 and 1756) Original Valeo pressure plate with extra straps added Has...

High Performance Road Clutch Kit

High-performance road clutch kitFIAT 124 Spider, Spider 2000 and Pininfarina - 1971-1985 (1608, 1592, 1756 and 1995cc)FIAT 124 Sport Coupe - 1971-1975 (1608, 1592 and 1756) Original Valeo pressure plate with extra straps added Has been re-heat treated...

Differential Ring and Pinion - 1969-78 (4.3:1 Ratio)

Differential ring gear and pinionFIAT 124 Spider and Sport Coupe 1969 to early 1978 Original 4.3:1 gear ratio which came in Spiders from 1971 to 1978 For front-loading differentials only

Battery Hold Down Bracket - 1983-85

Battery hold-down bracketFIAT Pininfarina Spider - 1983-1985 OEM Original FIAT

Plastic Hold Down Nut - NOS

Plastic hold down nut - NOS FIAT 124 Spider and Spider 2000 - 1974-1982 FIAT 124 Sport Coupe - 1974-1975 FIAT and Bertone X1/9 - 1974-1988   NOS - New Old Stock battery cover down nuts, found in the trunk of your Spider or X1/9 Also used to hold...

Plastic Hold Down Nut

Plastic hold down nut FIAT 124 Spider and Spider 2000 - 1974-1982 FIAT 124 Sport Coupe - 1974-1975 FIAT and Bertone X1/9 - 1974-1988   These faithful reproductions are used to hold the battery cover down in the trunk of your Spider & X1/9 Also...

Bluetooth, MP3 Compact Receiver

Compact bluetooth MP3 FM radioFIAT 124 Spider, Spider 2000 and Pininfarina - 1968-1985FIAT 124 Sport Coupe - 1968-1975FIAT and Bertone X1/9 - 1974-1988 This compact radio is desinged to fit in the dash and center console of your classic - unlike larger...

Auto Ricambi Special Forged Connecting Rod Set - 1995cc

Set of 4 Auto Ricambi Special forged 4340 steel connecting rods FIAT Spider 2000 and Pininfarina - 1979-1985 (1995cc)   Forged 4340 steel for the highest strength and durability H-beam conrods Designed and processed by CNC machines Big and small...

Oversize Cast Iron Valve Guide - 1966-78

Stock cast iron valve guide - 0.05mm oversize FIAT 124 Spider - 1966-1978 FIAT 124 Sport Coupe - 1967-1975   These guides have an outside diameter of 15.05mm Up to engine no. 0554875 Sold individually Note: Late 1978 cylinder heads used 14mm...

Oversize Performance Bronze Valve Guide - 1966-78

Oversize high performance bronze valve guide FIAT 124 Spider and Sport Coupe - 1966-1978   These oversized bronze guides have an outside diameter of 15.12mm outer diameter  - 0.12mm (0.005") oversize  Sold...

Oil Gauge Sending Unit - OEM

Oil pressure gauge sending unit - Original Equipment ManufacturerFIAT 124 Spider, Spider 2000 and Pininfarina - 1966-1982 FIAT 124 Sport Coupe - 1967-1975 FIAT and Bertone X1/9 - 1974-1978   Controls the gauge level indicator   OEM Original...

Oil Gauge Sending Unit - 1983-85

Oil pressure level sending unitFIAT Spider Pininfarina - 1983-1985FIAT X1/9 - 1974-1978 Controls the gauge level - Sender with wire pigtail

Oil Gauge Sending Unit - 1983-85 OEM

Oil pressure level sending unitFIAT Spider Pininfarina - 1983-1985FIAT X1/9 - 1974-1978 Controls the gauge level - Sender with wire pigtail OEM Original Veglia Borletti - NOS New Old Stock

Auxiliary Shaft Seal Cover

Auxiliary shaft seal cover FIAT 124 Spider, Sport Coupe, Spider 2000 and Pininfarina - 1966-1985  

Exhaust Manifold - 1968-78

  New 2 outlet exhaust manifold Fiat 124 Sport Coupe and Spider - 1966-1974   Use down pipe EX5-470 or EX5-474 depending on engine and gasket GA4-473   Can be used to upgrade 1975-1978 Spider to a two outlet manifold - Use down...

Exhaust Manifold - 1980-85 EFI

New 2-outlet exhaust manifold Fiat Spider 2000 and Pininfarina - 1980-1985 (with Bosch injection) Use down pipe EX5-480 or EX5-487 , depending on steering

3 Bolt Flange

3-bolt flange - located at catalytic converterFIAT 124 and Spider 2000  1975-1979 California models  1979-1980 49-state carbureted models Exhaust pipe flange to connect to the catalytic converter  

4 Bolt Flange

4-bolt flange - located at converterFIAT Spider 2000 and Pininfarina - 1980-1985 (with fuel injection) Four-bolt exhaust pipe flange to connect to the catalytic converter  

Hood Insulation Pad Clip - Coupe

Hood insulation pad or liner clipFIAT 124 Sport Coupe - 1967-1975   Used to secure the under-hood insulation liner on your Sport Coupe 21 clips required per car

Body Clip for Cable or Hose

Body clipFIAT 124 Spider, Spider 2000 and Pininfarina - 1966-1985FIAT 124 Sport Coupe - 1967-1975FIAT and Bertone X1/9 - 1974-1988 Commonly used on hood release cables and windshield washer hoses

Top Frame Velcro

Convertible top frame velcroFIAT 124 Spider, Spider 2000 and Pininfarina - 1966-1985 Located at the rear of the top frame 2 required per car

Convertible Top Catch Set - 1966-78

Chrome convertible top catch set FIAT 124 Spider - 1966-1978 Located on the windshield frame Catches have 5mm visor pins  

Convertible Top Catch Set - 1979-85

Chrome convertible top catch set FIAT Spider 2000 and Pininfarina - 1979-1985   Located on windshield frame Catches have 8mm visor pins  

Plastic Rear Deck Chrome Trim Set - 1983-85

Rear deck chromed plastic trim strip setFIAT Pininfarina Spider - 1983-1985   A faithfully reproduced pair of chromed plastic trim strips Can be added to earlier Spiders to cover the body seam

Fuel Filler Door Chrome Handle

Fuel lid or gas filler door chrome handleFIAT 124 Spider, Spider 2000 and Pininfarina - 1966-1985  

Hood Spring Support Bracket - 1979-85

Hood spring support bracket FIAT Spider 2000 and Pininfarina - 1979-1985   Located at the top of the radiator support   Sold individually - 4 required per car   For the plastic bushing, use part RE9-507

Hood Spring Bushing - Spider 2000

Hood spring plastic bushing FIAT Spider 2000, Pininfarina - 1979-1985   These are the plastic bushings for the brackets that hold the hood spring to the radiator support   Sold individually - 4 required per car   For the steel...

Trunk Lid Support Rod

Trunk lid prop rod assemblyFIAT 124 Spider - 1966-1978 Spring included  

Tail Light Assembly Pair - 1979-85 SAVE 20%

New pair of taillight assembliesy including gaskets (no circuit boards)FIAT Spider 2000 and Pininfarina - 1979-1985   Or order as a complete kit with LED compatible circuit boards included RS7-483-KIT and save even more!!

Complete Tail Light Assembly Kit - 1979-85 - SAVE!!

Taillight assembly pair with gaskets and LED compatible PC boardsFIAT Spider 2000 and Pininfarina - 1979-1985   An Auto Ricambi exclusive!   Instructions

License Plate Light Pair - 1975-85

Driver and passenger (left and right) side license plate light assembly setFIAT 124 Spider, Spider 2000 and Pininfarina - 1975-1985 These faithful, high-quality chrome metal reproductions also include lenses and rubber gaskets but do not come with the...

Fuel Pump Pre-Filter - with Fuel Injection

Screen type pre-filter for the fuel pump FIAT 124 Spider 2000 and Pininfarina - 1980-1985 (with Bosch fuel injection)FIAT and Bertone X1/9 - 1980-1988 (with Bosch fuel injection)   Protects against comtaminants or debris damaging the fuel...

Power Valve Diaphragm - 1979-80

Power valve diaphragm FIAT Spider 2000 - 1979-1980 (carbureted)   Fits Weber 28/32 ADHA carburetor  

EMPI Electric Fuel Pump

EMPI electric fuel pumpFIAT 124 Spider, Spider 2000 - 1966-1980 (carbureted) FIAT 124 Sport Coupe - 1967-1975FIAT and Bertone X1/9 - 1974-1980 (carbureted)   1.5 - 4.0 psi   Supplied with two 5/16" (8mm) barbed hose fittings    

Adjustable Fuel Pressure Regulator - Carbureted

Adjustable fuel pressure regulatorFIAT 124 Spider and Spider 2000 - 1966-1980 (carbureted)FIAT 124 Sport Coupe - 1967-1975FIAT X1/9 - 1974-1980 (carbureted)   The PETROL KING fuel pressure regulator has been designed to improve carburetor supply...

Fuel Injection Fuel Pump Connector

Fuel injection fuel pump electrical connectorFIAT Spider 2000 and Pininfarina - 1980-1985 (with Bosch fuel injection)FIAT and Bertone X1/9 - 1980-88 (with Bosch fuel injection) Female connector for the positive terminal of the original style fuel pumps...

Air Conditioning Fast Idle Solenoid

Fast idle solenoid for air-conditioned FIATSFIAT Spider 2000 and Pininfarina - 1980-1985 (with Bosch fuel injection) FIAT X1/9 and Bertone - 1980-1988 (with Bosch fuel injection) Also fits other AC equipped models OEM Original Equipment - accept no...

Steel Intake Plenum Heater Cover - 1980-85

Stock style steel intake / throttle heater coverFIAT Spider 2000 and Pininfarina - 04/1980-1985 (with Bosch fuel injection)   Original style yellow zinc plated steel cover   Note: Add the required gasket GA1-490 to your...

Heavy Duty Transmission Pan Gasket

Heavy duty transmission pan gasket (5-speed transmission) FIAT 124 Spider, Spider 2000 and Pininfarina - 1966-1985 FIAT 124 Sport Coupe - 1967-1975   Made of flexible rubber    

Distributor Cap & Rotor Kit - 1979-85 - Save 30%

Auto Ricambi Special distributor cap & rotor kitFIAT Spider 2000 and Pininfarina - 1979-1985 (with Magneti Marelli electronic ignition) Now with all brass electrodes  Save 30% on this kit   

Ignition Rotor - 1973-78

Ignition rotor FIAT 124 Spider - 1973-1978 (1592 and 1756cc)FIAT 124 Sport Coupe - 1973-1975    

Ignition Rotor - 1979-85 - NOS

Ignition rotor - OEMFIAT Spider 2000 and Pininfarina - 1979-1985 OEM Original - MAKO a licensed subsidiary of Magneti Marelli

Standard Magnetic Pick Up Coil - 1979-on

Magnetic pick up coilFIAT Spider 2000 and Pininfarina - 1979-1985 This is our standard quality pickup coil   This is an often overlooked part that can fail without warning and may be difficult to source locally, so don't be caught off...

Ignition Control Module - OEM

OEM ignition control moduleFIAT Spider 2000 and Pininfarina - 1979-1985   OEM, Original Equipment Manufacturer - Mako, which is licensed by Magneti Marelli