New Products

Brake Light Switch

Brake light switchFIAT 124 Spider, Spider 2000 and Pininfarina - 1966-1985FIAT 124 Sport Coupe - 1967-1975FIAT and Bertone X1/9 - 1974-1988 Located at the brake pedal

Brake Light Switch - Heavy Duty

Brake light switch - metalFIAT 124 Spider, Spider 2000 and Pininfarina - 1966-1985FIAT 124 Sport Coupe - 1967-1975FIAT and Bertone X1/9 - 1974-1988 Located at the brake pedal Improved metal construction

Warning / Reflective Safety Triangle

Safety Triangle FIATs All   Required in Europe and not a bad idea to have in the USA   Supplied with case

Parking Brake Switch - Spider

Parking (emergency) brake switchFIAT 124 Spider, Spider 2000 and Pininfarina - 1968-1985 Located at the parking brake lever Button portion is 15mm long For surround (or pad) see BR7-057 For the shorter 10mm version, which fits the 124 Sport Coupe and...

Parking Brake Switch - Sport Coupe and X1/9

Parking (emergency) brake switchFIAT 124 Sport Coupe - 1967-1975FIAT and Bertone X1/9 - 1974-1988 Located at the parking brake lever Button portion is 10mm long For Sport Coupe surround (or pad) see BR7-056 For the longer 15mm version, which fits the...

Performance Coolant System Air Bleed Tee

Performance aluminum coolant air bleed T-fitting FIAT 124 Spider, Spider 2000 and Pininfarina - 1966-1985 FIAT 124 Sport Coupe - 1967-1975   Installs at the highest point of the long heater hose A simple and effective way to remove the air trapped...

Front Caliper Piston - 48mm

Front brake caliper pistonFIAT 124 Spider, Spider 2000 and Pininfarina - 1966-1985 (except 1985 1/2)FIAT 124 Sport Coupe - 1967-1975FIAT and Bertone X1/9 - 1974-1988   Stainless front caliper piston - 48mm (1 7/8") bore   For the caliper...

Rear Caliper Piston - 34mm

Rear brake caliper pistonFIAT 124 Spider, Spider 2000 and Pininfarina - 1966-1985FIAT 124 Sport Coupe - 1967-1975FIAT and Bertone X1/9 - 1974-1988   Stainless rear caliper piston - 34mm (1 3/8") bore   For the caliper rebuild kit, see BR1-060

Scorpion Rear Caliper Piston - 38mm

Rear brake caliper pistonLancia Scorpion or Beta Montecarlo   This piston will NOT FIAT 124 Spider/FIAT X1/9 rear calipers unless they have been upgraded to the calipers with 38mm pistons, as found on the Lancia Scorpions.   Stainless rear...

High Performance Racing Clutch Kit

High-performance racing clutch kit with puck-style discFIAT 124 Spider, Spider 2000 and Pininfarina - 1971-1985 (1608, 1592, 1756 and 1995cc)FIAT 124 Sport Coupe - 1971-1975 (1608, 1592 and 1756) Original Valeo pressure plate with extra straps added Has...

High Performance Road Clutch Kit

High-performance road clutch kitFIAT 124 Spider, Spider 2000 and Pininfarina - 1971-1985 (1608, 1592, 1756 and 1995cc)FIAT 124 Sport Coupe - 1971-1975 (1608, 1592 and 1756) Original Valeo pressure plate with extra straps added Has been re-heat treated...

Differential Ring and Pinion - 1969-78 (4.3:1 Ratio)

Differential ring gear and pinionFIAT 124 Spider and Sport Coupe 1969 to early 1978 Original 4.3:1 gear ratio which came in Spiders from 1971 to 1978 For front-loading differentials only

Battery Hold Down Bracket - 1983-85

Battery hold-down bracketFIAT Pininfarina Spider - 1983-1985 OEM Original FIAT

Plastic Hold Down Nut - NOS

Plastic hold down nut - NOS FIAT 124 Spider and Spider 2000 - 1974-1982 FIAT 124 Sport Coupe - 1974-1975 FIAT and Bertone X1/9 - 1974-1988   NOS - New Old Stock battery cover down nuts, found in the trunk of your Spider or X1/9 Also used to hold...

Plastic Hold Down Nut

Plastic hold down nut FIAT 124 Spider and Spider 2000 - 1974-1982 FIAT 124 Sport Coupe - 1974-1975 FIAT and Bertone X1/9 - 1974-1988   These faithful reproductions are used to hold the battery cover down in the trunk of your Spider & X1/9 Also...

124 Sedan/Wagon Starter

Remanufactured starter FIAT 124 Sedan and Wagon 1966-1973 Like all of our products, these units carry a 6-month warranty This product requires a refundable $99.99 starter core chargeSend us your like rebuildable core for a refundSee our Terms and...

Auto Ricambi Special Forged Connecting Rod Set - 1995cc

Set of 4 Auto Ricambi Special forged 4340 steel connecting rods FIAT Spider 2000 and Pininfarina - 1979-1985 (1995cc)   Forged 4340 steel for the highest strength and durability H-beam conrods Designed and processed by CNC machines Big and small...

Oversize Cast Iron Valve Guide - 1966-78

Stock cast iron valve guide - 0.05mm oversize FIAT 124 Spider - 1966-1978 FIAT 124 Sport Coupe - 1967-1975   These guides have an outside diameter of 15.05mm Up to engine no. 0554875 Sold individually Note: Late 1978 cylinder heads used 14mm...

Oil Pan Guard L-bracket

Oil pan guard L-bracketFIAT 124 Spider, Spider 2000 and Pininfarina - 1966-1985FIAT 124 Sport Coupe - 1967-1975  Two needed to install the oil pan guard on a 1966-1978 FIAT 124 Bolts not included

Oil Filter Housing - early

Oil filter housingFIAT 124 Spider, Spider 2000 and Pininfarina - 1966 to early 1977 FIAT 124 Sport Coupe - 1967-1975   Used on 124s with the alternator on the passenger side   Must also install LU0-400-Z to use both sending units

Oil Gauge Sending Unit - OEM

Oil pressure gauge sending unit - Original Equipment ManufacturerFIAT 124 Spider, Spider 2000 and Pininfarina - 1966-1982 FIAT 124 Sport Coupe - 1967-1975 FIAT and Bertone X1/9 - 1974-1978   Controls the gauge level indicator   OEM Original...

Oil Gauge Sending Unit - 1983-85

Oil pressure level sending unitFIAT Spider Pininfarina - 1983-1985FIAT X1/9 - 1974-1978 Controls the gauge level - Sender with wire pigtail

Oil Gauge Sending Unit - 1983-85 OEM

Oil pressure level sending unitFIAT Spider Pininfarina - 1983-1985FIAT X1/9 - 1974-1978 Controls the gauge level - Sender with wire pigtail OEM Original Veglia Borletti - NOS New Old Stock

Auxiliary Shaft Seal Cover

Auxiliary shaft seal cover FIAT 124 Spider, Sport Coupe, Spider 2000 and Pininfarina - 1966-1985  

3 Bolt Flange

3-bolt flange - located at catalytic converterFIAT 124 and Spider 2000  1975-1979 California models  1979-1980 49-state carbureted models Exhaust pipe flange to connect to the catalytic converter  

4 Bolt Flange

4-bolt flange - located at converterFIAT Spider 2000 and Pininfarina - 1980-1985 (with fuel injection) Four-bolt exhaust pipe flange to connect to the catalytic converter  

Pininfarina Vent Window Seal - 1983-85

Triangle door window seal (left or right)Pininfarina Spider - 1983-1985 Fits either side Sold individually  

Hood Insulation Pad Clip - Coupe

Hood insulation pad or liner clipFIAT 124 Sport Coupe - 1967-1975   Used to secure the under-hood insulation liner on your Sport Coupe 21 clips required per car

Body Clip for Cable or Hose

Body clipFIAT 124 Spider, Spider 2000 and Pininfarina - 1966-1985FIAT 124 Sport Coupe - 1967-1975FIAT and Bertone X1/9 - 1974-1988 Commonly used on hood release cables and windshield washer hoses

Top Frame Velcro

Convertible top frame velcroFIAT 124 Spider, Spider 2000 and Pininfarina - 1966-1985 Located at the rear of the top frame 2 required per car

Convertible Top Catch Set - 1966-78

Chrome convertible top catch set FIAT 124 Spider - 1966-1978 Located on the windshield frame Catches have 5mm visor pins  

Convertible Top Catch Set - 1979-85

Chrome convertible top catch set FIAT Spider 2000 and Pininfarina - 1979-1985   Located on windshield frame Catches have 8mm visor pins  

Exterior Mirror Pair - 1979-82

Exterior rearview mirror pairFIAT Spider 2000 - 1979-1982 Reproduction of the 1981-1982 style mirrors Will also fit 1979-1980 Spiders The distance between the mounting holes is approximately 2.3" (59mm) Not adjustable remotely

Hood Spring Support Bracket - 1979-85

Hood spring support bracket FIAT Spider 2000 and Pininfarina - 1979-1985   Located at the top of the radiator support   Sold individually - 4 required per car   For the plastic bushing, use part RE9-507

Hood Spring Bushing - Spider 2000

Hood spring plastic bushing FIAT Spider 2000, Pininfarina - 1979-1985   These are the plastic bushings for the brackets that hold the hood spring to the radiator support   Sold individually - 4 required per car   For the steel...

Frame Rail Repair Section

Front frame rail/box section repair section FIAT 124 Spider, Spider 2000 and Pininfarina - 1966-1985 FIAT 124 Sport Coupe - 1967-1975   More sturdy than original Features larger / improved 12mm cross member studs  May require modification to...

Rear Side Marker Lens - Auto Ricambi Special - 1971-85

Replacement red rear side marker lens - Auto Ricambi SpecialFIAT 124 Spider, Spider 2000 and Pininfarina - 1971-1985FIAT 124 Sport Coupe - 1971-1975FIAT and Bertone X1/9 - 1974-1988 NOTE - may require trimming small tab

Air Cleaner Housing Clip - with Fuel Injection

Air filter (or cleaner) housing clipFIAT Spider 2000 and Pininfarina 1980-1985 (with Bosch fuel injection) Need four per housing Sold individually

Fuel Pump Pre-Filter - with Fuel Injection

Screen type pre-filter for the fuel pump FIAT 124 Spider 2000 and Pininfarina - 1980-1985 (with Bosch fuel injection)FIAT and Bertone X1/9 - 1980-1988 (with Bosch fuel injection)   Protects against comtaminants or debris damaging the fuel...

Weber Carburetor Replacement Kit

Carburetor replacement kit with Weber 32/36DFEV carburetor FIAT 124 Spider and Spider 2000 - 1968-1980 (carbureted) FIAT 124 Sport Coupe - 1967-1975   A great bolt-on upgrade for a stock Spider or a modified engine Supplied with Genuide Weber...

Power Valve Diaphragm - 1979-80

Power valve diaphragm FIAT Spider 2000 - 1979-1980 (carbureted)   Fits Weber 28/32 ADHA carburetor  

Fuel Injection Fuel Pump Connector

Fuel injection fuel pump electrical connectorFIAT Spider 2000 and Pininfarina - 1980-1985 (with Bosch fuel injection)FIAT and Bertone X1/9 - 1980-88 (with Bosch fuel injection) Female connector for the positive terminal of the original style fuel pumps...

Air Conditioning Fast Idle Solenoid

Fast idle solenoid for air-conditioned FIATSFIAT Spider 2000 and Pininfarina - 1980-1985 (with Bosch fuel injection) FIAT X1/9 and Bertone - 1980-1988 (with Bosch fuel injection) Also fits other AC equipped models OEM Original Equipment - accept no...

Steel Intake Plenum Heater Cover - 1980-85

Stock style steel intake / throttle heater coverFIAT Spider 2000 and Pininfarina - 04/1980-1985 (with Bosch fuel injection)   Original style yellow zinc plated steel cover   Note: Add the required gasket GA1-490 to your...

Heavy Duty Transmission Pan Gasket

Heavy duty transmission pan gasket (5-speed transmission) FIAT 124 Spider, Spider 2000 and Pininfarina - 1966-1985 FIAT 124 Sport Coupe - 1967-1975   Made of flexible rubber    

Distributor Cap - 1971-73 - 1608cc

Ignition distributor cap - NOSFIAT 124 Spider - 1971-1973 with 1608cc engineFIAT 124 Sport Coupe - 1971-1973 with 1608cc engine For distributors with single points and 55mm center electrode depth New Old Stock items are parts that we have limited and...

Distributor Cap & Rotor Kit - 1979-85 - Save 30%

Auto Ricambi Special distributor cap & rotor kitFIAT Spider 2000 and Pininfarina - 1979-1985 (with Magneti Marelli electronic ignition) Now with all brass electrodes  Save 30% on this kit   

Ignition Rotor - 1973-78

Ignition rotor FIAT 124 Spider - 1973-1978 (1592 and 1756cc)FIAT 124 Sport Coupe - 1973-1975    

Ignition Rotor - 1979-85 - NOS

Ignition rotor - OEMFIAT Spider 2000 and Pininfarina - 1979-1985 OEM Original - MAKO a licensed subsidiary of Magneti Marelli

Vacuum Advance Module

Distributor vacuum advance unit for the original Marelli distributorFIAT Spider 2000 and Pininfarina 1979-1985 Original Magneti Marelli licensed vacuum advance    

Vacuum Advance Module - NOS

Distributor vacuum advance unit for the original Marelli distributor - NOSFIAT Spider 2000 and Pininfarina - 1979-1985 These are NOS - New Old Stock - with some shelf wear & blemishes They have been tested and are 100% functional at almost 1/2 the...

Ballast Resistor - 1.6 Ohm

Ballast Resistor - 1.6 Ohm   Universal applications