Bleed Tee Cap Clamp and Misc

Radiator Hose Clamp

Radiator hose clampFIAT 124 Spider, Spider 2000 and Pininfarina - 1966-1985FIAT 124 Sport Coupe - 1967-1975FIAT and Bertone X1/9 - 1974-1988   Hose clamp 13/16in to 1-3/4in (21-45mm) diameter or SAE 20  

High Performance Constant Torque Hose Clamp

High-performance radiator hose clampFIAT 124 Spider, Spider 2000 and Pininfarina - 1966-1985FIAT 124 Sport Coupe - 1967-1975FIAT and Bertone X1/9 - 1974-1988 Constant torque radiator hose clamp - 22-44mm (~7/8"-1-3/4") diameter or SAE 20 Our clamps have...

Coolant System Air Bleed Tee

Coolant air bleed T-fitting FIAT 124 Spider, Spider 2000 and Pininfarina - 1966-1985 FIAT 124 Sport Coupe - 1967-1975   Installs at the highest point of the long heater hose A simple and effective way to remove the air trapped in the cooling...

Performance Coolant System Air Bleed Tee

Performance aluminum coolant air bleed T-fitting FIAT 124 Spider, Spider 2000 and Pininfarina - 1966-1985 FIAT 124 Sport Coupe - 1967-1975   Installs at the highest point of the long heater hose A simple and effective way to remove the air trapped...

Aluminum Radiator Drain Plug

Drain plug for aluminum radiators FIAT 124 Spider, Sport Coupe, Spider 2000 and Pininfarina - 1966-1985   Only fits Auto Ricambi aluminum radiators

Radiator Drain Plug

Plastic radiator drain plugFIAT 124 Spider, Sport Coupe, Spider 2000 and Pininfarina - 1966-1985 Located at the bottom of the radiator of stock copper core radiators

Coolant Tee Outlet with Bleeder

Billet aluminum coolant Tee outletFIAT 124 Spider, 2000 and Pininfarina - 1971-1985   Has an outlet in the middle that can be used for the temp sensor on fuel-injected vehicles or plugged off with plug CO0-057 and washer CO0-058 Supplied with two...

Carbureted Coolant T Outlet - 1971-80

    Coolant Tee outlet124 Spider, Sport Coupe and Spider 2000 - 1971-1980 (carbureted) This style does not have a bleeder hole

Coolant T Outlet

    Coolant T outlet FIAT 124 Spider 2000 and Pininfarina 1980-1985 with Fuel Injection Provision for both outlets just as original - Comes with plug and washer NOTES Can also be used on earlier models by adding an additional coolant T Plug...

Coolant Outlet Long Bolt

Coolant outlet long bolt FIAT 124 Spider, Spider 2000 and Pininfarina - 1966-1985FIAT 124 Sport Coupe - 1967-1975   These are the long bolts that hold the coolant outlet to the cylinder head Two needed per car For the washer, use part number...

Coolant Outlet Short Bolt

Coolant outlet short boltFIAT 124 Spider, Spider 2000 and Pininfarina - 1966-1985FIAT 124 Sport Coupe - 1967-1975 These are the short bolts that hold the coolant outlet to the cylinder head Two needed per car For the washer, use part number FT0-486

Coolant Outlet to Tee Bolt

Coolant outlet to Tee bolt FIAT 124 Spider, Spider 2000 and Pininfarina - 1966-1985FIAT 124 Sport Coupe - 1967-1975   These are the bolts that hold the coolant Tee to the coolant outlet by the timing belt cover Two needed per car For the washer,...

Coolant T Outlet Plug Washer

Coolant T outlet plug washerFIAT Spider 2000 and Pininfarina - 1979-1985Seal the bleed screw to the coolant outlet  

Coolant T Outlet Plug

Coolant T outlet plugFIAT Spider 2000 and Pininfarina 1979-1985 For washer see CO0-058

Heater Hose Clamp

Heater hose clampFIAT 124 Spider, Spider 2000 and Pininfarina - 1966-1985FIAT 124 Sport Coupe - 1967-1975FIAT and Bertone X1/9 - 1974-1988   Hose clamp 9/16 in. - 1-1/16 in (14-27mm) diameter   

Steel Intake Plenum Heater Cover - 1980-85

Stock style steel intake / throttle heater coverFIAT Spider 2000 and Pininfarina - 04/1980-1985 (with Bosch fuel injection)   Original style yellow zinc plated steel cover   Note: Add the required gasket GA1-490 to your...

Intake Plenum Heater Cover - April 1980-85

Billet aluminum intake / throttle heater coverFIAT Spider 2000 and Pininfarina - 04/1980-1985 (with Bosch fuel injection)   While the original steel cover commonly rusts and leaks this aluminum cover will outlast the car.   Supplied...