Clutch and Flywheel

Clutch Kit - 1966-71 - Original Equipment VALEO

OEM factory original Valeo clutch kit FIAT 124 Spider and Sport Coupe - 1966-1971 (1438cc only)   This clutch kit is manufactured by Valeo your Fiat's OEM factory original supplier and contains.  Not just like the original... this IS...

Clutch Kit - 1971-85 - Original Equipment VALEO

OEM factory original Valeo clutch kit FIAT 124 Spider, Spider 2000 and Pininfarina - 1971-1985 (1608, 1592, 1756, and 1995cc)FIAT 124 Sport Coupe - 1971-1975 (1608, 1592 and 1756cc)   This clutch kit is manufactured by Valeo, your Fiat's OEM...

High Performance Racing Clutch Kit

High-performance racing clutch kit with puck-style discFIAT 124 Spider, Spider 2000 and Pininfarina - 1971-1985 (1608, 1592, 1756 and 1995cc)FIAT 124 Sport Coupe - 1971-1975 (1608, 1592 and 1756) Original Valeo pressure plate with extra straps added Has...

High Performance Road Clutch Kit

High-performance road clutch kitFIAT 124 Spider, Spider 2000 and Pininfarina - 1971-1985 (1608, 1592, 1756 and 1995cc)FIAT 124 Sport Coupe - 1971-1975 (1608, 1592 and 1756) Original Valeo pressure plate with extra straps added Has been re-heat treated...

Clutch Release Bearing

Clutch release bearingFIAT 124 Spider, Spider 2000 and Pininfarina - 1966-1985 FIAT 124 Sport Coupe - 1967-1975   All metal construction

Clutch Alignment Tool - 124

Clutch alignment toolFIAT 124 Spider, Spider 2000 and Pininfarina - 1966-1985FIAT 124 Sport Coupe - 1967-1975 Used to hold the disc centered on the flywheel during installaion of a new clucth

Clutch Pedal

Clutch pedalFIAT 124 Spider, Spider 2000 and Pininfarina - 1966-1985FIAT 124 Sport Coupe - 1967-1975  

Clutch and Brake Pedal Bushing

Clutch and or brake pedal bushingFIAT 124 Spider, Sport Coupe, Spider 2000 and Pininfarina - 1966-1985   Requires 2 bushings per pedal   Sold individually

Clutch Pedal Helper Spring

Clutch pedal helper springFIAT 124 Spider, Spider 2000 and Pininfarina - 1966-1985FIAT 124 Sport Coupe - 1967-1975    

Clutch Cable Return Spring and Hook

Clutch cable return spring & hook (at transmission) FIAT 124 Spider, Spider 2000 and Pininfarina - 1966-1985 FIAT 124 Sport Coupe - 1967-1975   This updated version combines the original hook and spring into on unit.  

Clutch Fork Lever

Clutch fork or release bearing actuating leverFIAT 124 Spider, Spider 2000 and Pininfarina - 1966-1985FIAT 124 Sport Coupe - 1967-1975 Replace at any signs of wear  

Transmission Clutch Fork Boot

Transmission clutch fork bootFIAT 124 Spider, Sport Coupe, Spider 2000 and Pininfarina - 1966-1985 This boot is located on the side of the transmission where the clutch actuating lever passes into the transmission - it is designed to prevent debris from...

Clutch Cable Adjusting Nut

  Clutch cable adjusting nutFIAT 124 Spider, Sport Coupe, Spider 2000 and Pininfarina 1966-1985 This nut is located on the end of the clutch cable at the transmission

Clutch Fork Pivot Bolt

Clutch release bearing actuating fork pivot boltFIAT 124 Spider, Spider 2000 and Pininfarina 1966-1985FIAT 124 Sport Coupe - 1967-1975    

Bell Housing to Block Dowel

      Bell housing to block alignment dowel FIAT 124 Spider, Spider 2000 and Pininfarina 1966-1985 FIAT 124 Sport Coupe FIAT and Bertone X1/9 2 required per motor Sold each

Pilot Shaft Bearing - 1966-83

Pilot shaft bearingFIAT 124 Spider, Spider 2000 and Pininfarina - 1966 through 09/1983 - with 5-speed transmissionFIAT 124 Sport Coupe - 1967-1975 Located in the rear of the crankshaft It is good idea to replace this 35mm OD bearing at the same time as...

Pilot Shaft Bearing - 1983-85

Pilot shaft bearing09/1983-1985 Pininfarina Spider with 5-speed transmission Located in the rear of the crankshaft - its a good idea to replace this 32mm OD bearing at the same time as the clutch

Performance Aluminum Flywheel - 1971-78

Performance lightweight aluminum flywheel FIAT 124 Spider - 1971 to early 1978 (1608, 1592 and 1756cc)FIAT 124 Sport Coupe - 1971 -1975 (1608, 1592 and 1756cc)   This flywheel allows the engine to rev much faster due to its low weight Weighs...

Performance Aluminum Flywheel - 1978-85

  Performance lightweight aluminum flywheel FIAT 124 Spider, Spider 2000 and Pininfarina - late 1978-1985 (1756 and 1995cc)    This flywheel allows the engine to rev much faster due to its low weight Weighs only 8.5 lbs (3.9kg)...

Lightweight Steel Billet Performance Flywheel - 10mm

Ultra high performance new steel billet lightweight flywheel by HelixFIAT 124 Spider and Spider Coupe - 1971-1978 (to engine number 0430996) 12.3lbs overall weight 10mm diameter bolt holes Approved for use in Auto Ricambi performance engines

Lightweight Steel Billet Performance Flywheel - 12mm

Ultra high performance new steel billet lightweight flywheel by HelixFIAT 124 Spider, Spider 2000 and Pininfarina - 1978-1985 (after engine number 0430996) 12.3lbs overall weight 12mm diameter bolt holes Approved for use in Auto Ricambi...

Ring Gear for Flywheel - 1971-85

Flywheel ring gear FIAT 124 Spider, Sport Coupe, Spider 2000 and Pininfarina - 1971-1985 (1608, 1756, 1995cc)   This new ring-gear has 134 teeth  

Ring Gear for Flywheel - 1966-70

Flywheel ring gear FIAT 124 Spider, Sport Coupe - 1966-1970 (1438cc)   This new ring-gear has 129 teeth  

Flywheel Dowel Pin

Flywheel dowel pin - manual transmissionFIAT 124 Spider, Spider 2000 and Pininfarina - 1966-1985FIAT 124 Sport Coupe - 1967-1975FIAT and Bertone X1/9 - 1974-1988 Positions pressure plate on flywheel 3 required per fly wheel Sold individually