Gaskets and Seals

Complete Gasket Set - 1966-72

Complete engine gasket setFIAT 124 Spider and Sport Coupe 1966-1972 (1438 and 1608cc) Includes: All gaskets for the the entire engine 2 crank, 2 cam and auxiliary shaft seals 8 valve seals Both manifold gaskets Manufactured in Italy to the highest...

Complete Gasket Set - 1973

Complete engine gasket setFIAT 124 Spider and Sport Coupe 1973 (1592cc) Includes: All gaskets for the the entire engine 2 crank, 2 cam and auxiliary shaft seals 8 valve seals Both manifold gaskets Does not include distributor gasket - if required...

Complete Gasket Set - 1974-76

      Complete engine gasket setFIAT 124 Spider and Sport Coupe 1974-1976 (1756cc) 70mm ID rear crank seal and straight side oil pan gasket (the holes on the exhaust side are straight in a line) Includes: All gaskets for the the...

Complete Gasket Set - 1976-78

      Complete engine gasket setFIAT 124 Spider and Sport Coupe 1976-1978 (1756cc) Supplied with both 70 and 74mm ID rear crank seals, and an oil pan gasket with 2 offset holes on the exhaust side (later type). Includes: All...

Complete Gasket Set - 1979-80 Carbureted

      Complete engine gasket setFIAT 124 Spider 2000 1979-1980 (carbureted 1995cc) Includes: All gaskets for the the entire engine 2 crank, 2 cam and auxiliary shaft seals 8 valve seals Both manifold gaskets Does not include...

Complete Gasket Set - 1980-85 Fuel Injected

      Complete engine gasket setFIAT 124 Spider 2000 and Pininfarina 1980-1985 (with Bosch fuel injection 1995cc) Includes: All gaskets for the the entire engine 2 crank, 2 cam and auxiliary shaft seals 8 valve seals Intake plenum...

Complete Gasket Set - 1438cc OHV

  Complete engine gasket setFIAT 124 Sedan and Wagon 1968-1973 with 1438cc OHV Includes: All gaskets and seals for the the entire engine All seals including valve seals Both manifold gaskets Manufactured in Italy to the highest standards...

Cylinder Head Gasket Set - 1973

Cylinder head gasket setFIAT 124 Spider and Sport Coupe 1973 (1592cc)  Includes: All gaskets for the the cylinder head 2 cam and 8 valve seals Both manifold gaskets Does not include distributor gasket - if required see GA1-449 Manufactured in...

Cylinder Head Gasket Set - 1974-78

Cylinder head gasket setFIAT 124 Spider and Sport Coupe - 1974-1978 (1756cc) Includes: All gaskets for the the cylinder head 2 cam seals 8 valve seals Both manifold gaskets Does not include distributor gasket - if required see GA1-449 Manufactured...

Cylinder Head Gasket Set - 1979-80 Carbureted

Cylinder head gasket setFIAT 124 Spider 2000 1979-1980 (carbureted 1995cc) Includes: All gaskets for the the cylinder head 2 cam seals 8 valve seals Both manifold gaskets Does not include distributor gasket - if required see GA1-449 Manufactured...

Cylinder Head Gasket Set - 1980-85 - Fuel Injected

Cylinder head gasket setFIAT Spider 2000 and Pininfarina - 1980-1985 (with Bosch fuel injection 1995cc)  Includes: All gaskets for the the cylinder head 2 cam and 8 valve seals Also includes the intake plenum Both manifold gaskets Does not include...

Cylinder Head Gasket - 1974-85

      Cylinder head to block gasketFIAT 124, Sport Coupe, Spider 2000, Pininfarina and 1974-1985 (1756cc and 1995cc) Manufactured in Italy to the highest standards and specifically for your Fiat 124  

Cylinder Head Gasket - Thick - 1974-85

      Cylinder head to block gasket - 1.9mm thickFIAT 124 Spider, Sport Coupe, Spider 2000, Pininfarina 1974-1985 (1756cc and 1995cc) Lowers compression ratio by approximately 0.3 points If the compression ratio is 10:1 with the...

Cylinder Head Gasket - Thin for higher compression - 1974-85

Cylinder head gasket - 1.2mm thickFIAT 124 Spider, Sport Coupe, Spider 2000, Pininfarina - 1974-1985 (1756cc and 1995cc) Increases compression ratio by approximately 0.2 points (If the compression ratio is 8:1 with the stock gasket it will be...

US Made MLS Head Gasket - 1974-85 - 1.5mm - 86mm

Head gasket by Cleveland Gaskets (manufactured by Cometic in the USA) High-Performance multi-layer steel (MLS) design FIAT 124 Spider, Spider 2000 and Pininfarina - 1974-1985 (1756 and 1995cc)FIAT 124 Sport Coupe - 1974-1975 (1756cc)   1.5mm thick,...

Intake Manifold Gasket - 1966-85 (except 1979-80 carbureted)

      Intake manifold to cylinder head gasketFIAT 124 Spider, Sport Coupe, Spider 2000 and Pininfarina 1966-1985 (except 1979-1980 carbureted) Manufactured in Italy to the highest standards and specifically for your Fiat 124

Intake Manifold Gasket - 1979-80 Carbureted

Intake manifold to cylinder head gasketFIAT Spider 2000 - 1979-1980 (carbureted) Manufactured in Italy to the highest standards and specifically for your Fiat 124

Exhaust Manifold Gasket - 1979-1980 Carbureted Only

      Exhaust manifold to cylinder head gasketFIAT Spider 2000 1979-1980 (carbureted only) Manufactured in Italy to the highest standards and specifically for your Fiat 124

Exhaust Manifold Gasket - 1966-85 (except 1979-80 carbureted)

Exhaust manifold gasketFIAT 124 Spider, Spider 2000 and Pininfarina 1966-1985 (except 1979-1980 carbureted)FIAT 124 Sport Coupe - 1967-1975 Manufactured in Italy to the highest standards and specifically for your Fiat 124

Fuel Pump Gasket

Fuel pump to block gasketFIAT 124 Spider, Sport Coupe and Spider 2000 - 1966-1980 Also work for the fuel pump block off plate Sold individually - 2 required for the fuel pump Manufactured in Italy to the highest standards and specifically for your...

Thermostat Housing to Head Seal

Thermostat housing or water outlet to head sealing gasket FIAT 124 Spider, Spider 2000 and Pininfarina - 1966-1985 FIAT 124 Sport Coupe - 1967-1975   Cars with in head thermostat (1966-70 and 1973-1974) require 2 gaskets   Manufactured in Italy...

Paper Thermostat Housing to Head Gasket

Coolant thermostat housing or water outlet to head paper gasketFIAT 124 Spider, Sport Coupe, Spider 2000 and Pininfarina - 1966-1985

Coolant T Outlet Gasket

      Coolant Tee housing gasketFIAT 124 Spider, Sport Coupe, Spider 2000 and Pininfarina - 1971-1985  A must for every timing belt replacement Manufactured in Italy to the highest standards and specifically for your Fiat 124

Water Pump Gasket - 1966-72

Water pump to block gasketFIAT 124 Spider and Sport Coupe - 1966-1972 (1438, 1608cc) Manufactured in Italy to the highest standards and specifically for your Fiat 124

Water Pump Gasket - 1973-85

Water pump to block gasketFIAT 124 Spider, Spider 2000 and Pininfarina - 1973-1985 (1592, 1756, 1995cc) Manufactured in Italy to the highest standards and specifically for your Fiat 124

Water Pump to Heater Tube Gasket

Water pump to heater tubeFIAT 124 Spider, Sport Coupe, Spider 2000 and Pininfarina - 1966-1985 Manufactured in Italy to the highest standards and specifically for your Fiat 124

Front Crankshaft Seal Holder Gasket

Front crankshaft seal holder to block gasketFIAT 124 Spider, Sport Coupe and Spider 2000 and Pininfarina - 1966-1985 Manufactured in Italy to the highest standards and specifically for your Fiat 124

Auxiliary Shaft Seal Holder Gasket

Auxiliary shaft seal holder to block gasketFIAT 124 Spider, Sport Coupe and Spider 2000 and Pininfarina - 1966-1985 Manufactured in Italy to the highest standards and specifically for your Fiat 124

Rear Crankshaft Seal Cover Gasket

Rear seal cover to block gasketFIAT 124 Spider, Sport Coupe and Spider 2000 and Pininfarina 1966-1985 Manufactured in Italy to the highest standards and specifically for your Fiat 124

Rear Coolant Gallery Cover Gasket - 1966-78

Rear coolant gallery cover to block gasketFIAT 124 Spider and Sport Coupe - 1966-1978 (1438, 1592, 1608, and 1756cc) Manufactured in Italy to the highest standards and specifically for your Fiat 124

Rear Coolant Galley Cover Gasket - 1979-85

Rear coolant gallery cover to block gasketFIAT Spider 2000 and Pininfarina - 1979-1985 (19995cc) Manufactured in Italy to the highest standards and specifically for your Fiat 124

Cam or Valve Cover Gasket

Cam box cover or valve cover gasketFIAT 124 Spider and Spider 2000 and Pininfarina - 1966-1985 FIAT 124 Sport Coupe - 1967-1975 Excellent quality rubberized cork NOT the old cork gaksets of yore, these work very well Sold individually Manufactured in...

Cam Box to Head Gasket

Cam box to cylinder headFIAT 124 Spider, Sport Coupe and Spider 2000 and Pininfarina 1966-1985Gaskets are sold individually Manufactured in Italy to the highest standards and specifically for your Fiat 124  

Cam Box Housing Rear Cover Gasket

Cam housing rear cover gasketFIAT 124 Spider, Sport Coupe and Spider 2000 and Pininfarina - 1966-1985 Sold individually Manufactured in Italy to the highest standards and specifically for your Fiat 124

Cam Cover Sealing Washer

      Cam or valve cover hold down bolt sealing washerFIAT 124 Spider, Sport Coupe, Spider 2000 and Pininfarina - 1966-1985 This little item can make all of the difference for keeping your cam/valve cover from leaking oil. These...

Oil Vapor Separator Gasket

Oil vapor separator to block gasketFIAT 124 Spider, Sport Coupe and Spider 2000 and Pininfarina - 1966-1985 Manufactured in Italy to the highest standards and specifically for your Fiat 124

Oil Pump Gasket - 1966-76

Oil pump to block gasketFIAT 124 Spider - 1966-1976 to engine number 0572366FIAT 124 Sport Coupe - 1967-1975 to engine number 0572366 Manufactured in Italy to the highest standards and specifically for your Fiat 124

Oil Pump Gasket - 1976-85

Oil pump to block gasketFIAT 124 Spider, Spider 2000 and Pininfarina - 1976-1985 (late 1756 and 1995cc all)From engine number 0572366 Manufactured in Italy to the highest standards and specifically for your Fiat 124

Oil Pan Gasket - 1973-76

    Oil pan gasket - made from rubberized corkFIAT 124 Spider and Sport Coupe 1973-1976 (1592 and early 1756cc to engine Number 0430995) All the bolts on the exhaust side are in a straight line - For engines with 2 offset bolts use part...

Oil Pan Gasket - 1966-73

Oil pan gasketFIAT 124 Spider and Sport Coupe 1966-1973 (1197, 1438 and 1608cc) Manufactured in Italy to the highest standards and specifically for your Fiat 124

Oil Pan Gasket - 1976-85

Oil pan gasketFIAT 124 Spider, Spider 2000 and Pininfarina 1976-1985 (very late 1975 from engine Number 0430996-on) 2 off-set bolts on the exhaust side. Manufactured in Italy to the highest standards and specifically for your Fiat 124

Oil Filter Housing Gasket - 1966-77

Oil filter housing to block gasketFIAT 124 Spider and Sport Coupe - 1966-1977 (1438, 1608, 1592 and early 1756cc) Manufactured in Italy to the highest standards and specifically for your Fiat 124 NOTE: To engine number #572366

Oil Filter Housing Gasket - 1978-85

Oil filter housing to block gasketFIAT Spider 2000 and Pininfarina 1978-1985 (late 1756 and 1995cc) Manufactured in Italy to the highest standards and specifically for your Fiat 124 NOTE: From engine number #572366

Throttle Heater Gasket - 1980-85

Throttle heater gasketFIAT Spider 2000 and Pininfarina with Fuel injection - 04/1980-1985 Made to the highest standards and specifically for your engine  

Intake Plenum Gasket

Intake plenum box gasketFIAT Spider 2000 and Pininfarina 1980-1985 (with Bosch fuel injection) Manufactured in Italy to the highest standards and specifically for your Fiat 124

Cam and Auxiliary Shaft Oil Seal

Cam and auxiliary shaft oil sealFIAT 124 Spider, Spider 2000 and Pininfarina - 1966-1985FIAT 124 Sport Coupe - 1967-1975FIAT and Bertone X1/9 - 1974-1988  

Rear Crankshaft Seal - 1976-85

      Rear crank shaft oil sealFIAT 124 Spider, Spider 2000 and Pininfarina - 1976-1985 74mm ID Fits from engine number 430595 onward

Rear Crankshaft Seal - 1966-76

Rear crank shaft oil seal FIAT 124 Spider and Sport Coupe - 1966-1976 70mm ID Fits to engine number 430594

Performance Valve Seal Set

High performance valve guide seal setFIAT 124 Spider, Spider 2000 and Pininfarina - 1966-1985FIAT 124 Sport Coupe - 1967-1975FIAT and Bertone X1/9 - 1974-1988   A complete set of 8 Viton seals manufactured by Goetze

Centrifugal Oil Filter Cover O-Ring - 1438cc

Centrifugal oil filter cover O-RingFIAT 124 Spider and Sport Coupe - 1966-1970 (1438cc)

Distributor Oil Seal

SKF distributor oil sealFIAT 124 Spider, Sport Coupe, Spider 2000 and Pininfarina - 1971-1985 For cam box mounted distributors For distributor bearings, see BG4-450 Note: Removing the distributor gear can be quite a chore.. instead of doing the repair,...

Distributor Base Gasket

Distributor base gasket FIAT 124 Spider, Spider 2000 and Pininfarina - 1966-1985 FIAT Sport Coupe - 1967-1975 FIAT and Bertone X1/9 - 1974-1988   Also fits the distributor hole cover on the left front of the twin-cam engine block