Mechanical

FIAT Billet Oil Filler Cap

Billet oil filler cap - FIATFIAT 124 Spider, Spider 2000 and Pininfarina - 1966-1985FIAT 124 Sport Coupe - 1967-1975FIAT and Bertone X1/9 - 1974-1988Lancia Scorpion - 1976-1977   Supplied with new seal - an excellent engine bay upgrade    

High Performance Oil Filter

High-performance TECNECO oil filterFIAT 124 Spider, Spider 2000 and Pininfarina - 1977-1985   For cars with the alternator on the driver's side   With internal check valve TECNECO filters have been independently tested and are the highest...

Electric Water Pump Kit

Electric water pump kitFIAT 124 Spider, Sport Coupe, Spider 2000, Pininfarina - 1966-1985 This electric water pump kit eliminates the need for a mechanical water pump. The kit contains all parts needed to convert a Fiat twin cam engine to an electric...

Water Pump Block-off Kit

Water pump block-off kit FIAT 124 Spider, Sport Coupe, Spider 2000, Pininfarina - 1966-1985 This is an optional item to be used with our electric pater pump kit CO5-700  This kit eliminates the original mechanical water pump when...

High Performance Timing Belt - 1971-78

High performance timing belt FIAT 124 Spider - 1971-1978 (1592, 1608 and 1756cc)FIAT 124 Sport Coupe - 1971-1975 (1592, 1608 and 1756cc)   This performance 1 inch (25.4mm) wide timing belt will install the same as a standard belt and provides extra...

High Performance Timing Belt - 1979-85

High performance timing belt FIAT 124 Spider 2000 and Pininfarina - 1979-1985 (1995cc)   This performance 1 inch (25.4mm) wide timing belt will install the same as a standard belt and provides extra strength and security for higher rpm motors. A...

Performance Connecting Rod Bearings - 1976-85

Ultra high-performance Glyco connecting rod bearing set - Choose sizeFIAT 124 Spider, Spider 2000 and Pininfarina - 1976-1985   These bearings feature no oil holes as they are not needed (They were eliminated on the later versions of these...

High Performance Main Bearing Set - 1973-85

Ultra high performance Glyco main bearing set - Standard SizeFIAT 124 Spider, Spider 2000 and Pininfarina - 1973-1985 (1592, 1756 and 1995cc)FIAT 124 Sport Coupe - 1973-1975 (1592, 1756cc) Approved for use in Auto Ricambi performance engines

Pauter Chrome Moly Connecting Rod Set - 1756cc

  Set of 4 Pauter 4340 chrome moly connecting rods FIAT 124 Spider - 1974-1978 (1756cc)   Unique single rib design E- 4340 chrome-moly forged rod.  Overall, the clean, windage-reducing configuration combined with the strength of the...

Pauter Chrome Moly Connecting Rod Set - 1995cc

Set of 4 Pauter 4340 chrome moly connecting rods FIAT Spider 2000 and Pininfarina - 1979-1985 (1995cc)     Unique single rib design E- 4340 chrome-moly forged rod.  Overall, the clean, windage-reducing configuration combined with the...

Auto Ricambi Special Forged Connecting Rod Set - 1995cc

Set of 4 Auto Ricambi Special forged 4340 steel connecting rods FIAT Spider 2000 and Pininfarina - 1979-1985 (1995cc)   Forged 4340 steel for the highest strength and durability H-beam conrods Designed and processed by CNC machines Big and small...

Degree Wheel

Timing degree wheel FIAT 124 Spider, Spider 2000 and Pininfarina - 1966-1985FIAT 124 Sport Coupe - 1967-1975   This is an all steel degree wheel, 10" (25cm) diameter with three adapters to fit various size crankshafts Mandatory when installing...

Performance Adjustable Cam Gear Set

High performance adjustable aluminum cam gear (pulley) pair FIAT 124 Spider, Spider 2000 and Pininfarina - 1966-1985FIAT 124 Sport Coupe - 1967-1975   Allows one to dial in cam timing perfectly Available in black or red, choose your color when...

Aluminum Crank Pulley - 1971 to early 1977

Aluminum crankshaft pulley FIAT 124 Spider - 1971 to early 1977 (1608cc and early 1756cc engines) FIAT 124 Sport Coupe - 1971-1975 (1608cc and early 1756cc engines)   Center ID is 29mm Engines with alternator on the exhaust side Lighter than...

Aluminum Crank Pulley - late 1978 to 1985

Race proven Allison performance aluminum crankshaft pulley FIAT 124 Spider, Spider 2000 and Pininfarina - late 1977 to 1985 (late 1756cc and 1995cc)   Almost 4 pounds lighter than the stock cast iron version Looks great installed! For cars with the...

Aluminum Water Pump Pulley - 1970-72

Aluminum water pump pulley FIAT 124 Spider - 1970-1972 (1438 and 1608cc)FIAT 124 Sport Coupe - 1970-1972 (1438 and 1608cc)This beautiful titanium color anodized pulley is a great replacement for a broken part, or just use to dress up the engine...

Aluminum Water Pump Pulley - 1973-77

Aluminum water pump pulley FIAT 124 Spider - 1973 to early 1977FIAT 124 Sport Coupe - 1973-1975   This pulley fits 1592cc and 1756cc engines with alternator on the exhaust side   This beautiful titanium color anodized pulley is a great...

Aluminum Water Pump Pulley - 1977-85

Aluminum water pump pulley FIAT 124 Spider, Spider 2000 and Pininfarina - mid 1977 to 1985   This pulley fits late 1756cc engines with alternator on left (driver's) side and all 1995cc engines This beautiful titanium color anodized pulley is a...

Performance Aluminum Flywheel - 1971-78

Performance lightweight aluminum flywheel FIAT 124 Spider - 1971 to early 1978 (1608, 1592 and 1756cc)FIAT 124 Sport Coupe - 1971 -1975 (1608, 1592 and 1756cc)   This flywheel allows the engine to rev much faster due to its low weight Weighs...

Performance Aluminum Flywheel - 1978-85

  Performance lightweight aluminum flywheel FIAT 124 Spider, Spider 2000 and Pininfarina - late 1978-1985 (1756 and 1995cc)    This flywheel allows the engine to rev much faster due to its low weight Weighs only 8.5 lbs (3.9kg)...

US Made MLS Head Gasket - 1974-85 - 1.5mm - 86mm

Head gasket by Cleveland Gaskets (manufactured by Cometic in the USA) High-Performance multi-layer steel (MLS) design FIAT 124 Spider, Spider 2000 and Pininfarina - 1974-1985 (1756 and 1995cc)FIAT 124 Sport Coupe - 1974-1975 (1756cc)   1.5mm thick,...

Performance Valve Seal Set

High performance valve guide seal setFIAT 124 Spider, Spider 2000 and Pininfarina - 1966-1985FIAT 124 Sport Coupe - 1967-1975FIAT and Bertone X1/9 - 1974-1988   A complete set of 8 Viton seals manufactured by Goetze

High Performance Cylinder Head - 1756cc

  High performance 1756cc cylinder headFIAT 124 Spider and Sport Coupe 1974-1978 (1756cc) This Auto Ricambi cylinder head has CNC Ported intake and exhaust ports 4 large stainless steel 43mm intake valves 4 large stainless steel 37.5mm exhaust...

Reher-Morrison High Performance Cylinder Head - 1995cc

Reher-Morrison High performance 1995cc cylinder headFIAT Spider 2000 and Pininfarina 1980-1985 - with Fuel Injection (See Note below)   This Auto Ricambi cylinder head features the following: Machined and assembled by the famed engine...

High Performance Cylinder Head - 1995cc

High performance 1995cc cylinder headFIAT Spider 2000 and Pininfarina 1980-1985 - with Fuel Injection (See Note below) This Auto Ricambi cylinder head has CNC Ported intake and exhaust 4 large stainless steel 43mm intake valves 4 large...

Stock Camshaft - New

Stock camshaft for carbureted or fuel injected engines FIAT 124 Spider, Spider 2000 and Pininfarina - 1966-1985FIAT 124 Sport Coupe - 1967-1975   Intake or exhaust Has distributor drive gear Ground in the U.S. from European made blanks Sold...

Performance Colombo & Bariani 282 Camshaft

Colombo and Bariani 282 performance camshaftFIAT 124 Spider, Spider 2000 and Pininfarina - 1966-1980 - CarburetedFIAT 124 Sport Coupe - 1967-1975 This is a NEW cam, not reground, not welded, but made by Colombo and Bariani in Italy from NEW billet...

Performance Colombo & Bariani 294 Camshaft

Colombo and Bariani 294 performance camshaftFIAT 124 Spider, Spider 2000 and Pininfarina - 1966-1980 - CarburetedFIAT 124 Sport Coupe - 1967-1975   This is a NEW cam, not reground, not welded, but made by Colombo and Bariani in Italy from NEW billet...

274 Camshaft for Fuel Injected Engines

New steel billet performance cam shaft for fuel injected engines (intake or exhaust) Fiat Spider 2000 and Pininfarina - 1980-1985   282 degree duration and 66 degrees of overlap at running clearance 240 degrees of duration at .050" (1.25mm)...

284 High-Performance Camshaft

New steel billet performance camshaft for carbureted or fuel injected engines (intake or exhaust) Fiat 124 Spider, Sport Coupe, Spider 2000 and Pininfarina - 1966-1985FIAT 124 Sport Coupe - 1967-1975   288 degree duration and 72 degrees of overlap...

285 High-Performance Camshaft

New steel billet performance camshaft for carbureted or fuel injected engines (intake or exhaust) FIAT 124 Spider, Spider 2000 and Pininfarina - 1966-1985 - Carbureted onlyFIAT 124 Sport Coupe - 1967-1975   298 degree duration and 68 degrees of...

410 Autocross Camshaft

New steel billet performance camshaft for highly tuned street or autocross cars (intake or exhaust) FIAT 124 Spider, Spider 2000 and Pininfarina - 1966-1985 - CarburetedFIAT 124 Sport Coupe - 1967-1975   304 degrees duration and 88 degrees of...

430 Race Camshaft

Performance camshaft for highly tuned autocross or full race cars FIAT 124 Spider, Spider 2000 and Pininfarina - 1966-1985 - CarburetedFIAT 124 Sport Coupe - 1967-1975   New steel billet camshaft 294 degree duration at running clearances 10.9mm...

Performance Reground Intake Camshaft

Reground intake side performance camshaft Fiat 124 Spider, Spider 2000 and Pininfarina - 1966-1985FIAT 124 Sport Coupe - 1967-1975   40/80 intake reground camshaft 10.1mm lift, 240 degrees duration at .050" (1.25mm) clearance Lash...

Performance Reground Exhaust Camshaft

Reground exhaust side performance camshaft Fiat 124 Spider, Spider 2000 and Pininfarina - 1966-1985FIAT 124 Sport Coupe - 1967-1975   40/80 exhaust reground camshaft 10.1 lift, 240' duration at .050" (1.25mm) clearance Lash clearance 0...

Billet Camshaft Blank

Semi-finished camshaft blank   European manufacture Made from SAE 8620 steel Sold individually  

Cylinder Head Air Injection Plug Set

Cylinder head air injection plug setFIAT 124 Spider 1974-1978 (1756cc) Plugs the four holes left when removing the air injection manifold Not for use on pollution controlled motor vehicles.

FIAT Valve Cover Hold Down Set

Custom billet valve cover hold down bolt set with FIAT engraved on the top FIAT 124 Spider, Sport Coupe, Spider 2000 and Pininfarina - 1966-1985   Supplied with gaskets and a wrench to prevent over tightening

Red Valve Cover Hold Down Bolt Set

Custom billet valve cover hold down bolt set with red FIAT text on the topFIAT 124 Spider, Sport Coupe, Spider 2000 and Pininfarina 1966-1985 Enhance the looks of the engine compartment with these custom knobs! Add four gaskets if needed, our part...

ABARTH Valve Cover Hold Down Set

Custom billet valve cover hold down set with ABARTH engraved on the top FIAT 124 Spider, Sport Coupe, Spider 2000 and Pininfarina - 1966-1985   Enhance the looks of the engine compartment with these custom knobs!   Add four gaskets if...

Valve Cover Bolt Tool

Custom billet valve cover bolt tool FIAT 124 Spider, Sport Coupe, Spider 2000 and Pininfarina - 1966-1985   Wrench for our custom billet valve cover bolts - 19mm   Does not fit stock valve cover bolts  

Blank Valve Cover Bolt Set

Custom billet valve cover hold down bolt set  FIAT 124 Spider, Sport Coupe, Spider 2000 and Pininfarina - 1966-1985   Enhance the looks of the engine compartment with these custom knobs!   Add four gaskets if needed, our part number...

Top Hat Shim or Lash Cap

Top hat shim FIAT 124 Spider, Spider 2000 and Pininfarina - 1966-1985FIAT 124 Sport Coupe - 1967-1975FIAT and Bertone X1/9 - 1974-1988   This shim is used when valve clearance is too large to take up with the regular shims, which usually occurs when...

AR Special High Performance Intake Valve Set

Auto Ricambi Special high-performance stainless steel intake valve set FIAT 124 Spider, Sport Coupe, Spider 2000, and Pininfarina 1966-1985   The Auto Ricambi stainless steel intake valves were specifically designed to accommodate performance...

AR Special High Performance Exhaust Valve Set

Auto Ricambi Special high-performance stainless steel exhaust valve set FIAT 124 Spider, Sport Coupe, Spider 2000, and Pininfarina 1966-1985   The Auto Ricambi stainless steel exhaust valves were specifically designed to accommodate performance...

High Performance Exhaust Valve - 37.5mm

High performance stainless steel exhaust valve FIAT 124 Spider, Sport Coupe, Spider 2000 and Pininfarina 1966-1985   Our Auto Ricambi stainless steel exhaust valves were specifically designed to accommodate performance camshafts and have been...

High Performance Intake Valve - 43mm

High performance stainless steel intake valve FIAT 124 Spider, Sport Coupe, Spider 2000 and Pininfarina 1966-1985   Our Auto Ricambi stainless steel intake valves were specifically designed to accommodate performance camshafts and have been race...

High Performance Intake Valve - 43.5mm

  High performance stainless steel intake valveFIAT 124 Spider, Sport Coupe, Spider 2000 and Pininfarina 1966-1985 Our Auto Ricambi stainless steel intake valves were specifically designed to accommodate performance cam shafts.  And have...

Performance Bronze Valve Guide - 1966-78

High performance bronze valve guideFIAT 124 Spider and Sport Coupe - 1966-1978   These performance bronze guides have an outside diameter of 15mm Up to engine no. 0554875 Sold individually   Note: Late 1978 cylinder heads used 14mm...

Oversize Performance Bronze Valve Guide - 1966-78

Oversize high performance bronze valve guide FIAT 124 Spider and Sport Coupe - 1966-1978   These oversized bronze guides have an outside diameter of 15.12mm outer diameter  - 0.12mm (0.005") oversize  Sold...

Oil Pan Guard - 1979-85

Oil pan guardFIAT 124 Spider and Pininfarina - 1979-1985 Protects the oil pan from damage which can be caused by 'bottoming out'. This rugged sump guard can prevent hundreds of dollars in costly repairs. A must for those who really like to drive their...

Oil Pan with Factory Baffles - 1979-85

Original style oil pan with baffles FIAT Spider 2000 and Pininfarina - 1979-1985 (1995cc)   Why settle for cheap reproductions when you can have a pan with OEM Fiat style baffles - These baffles are critical for preventing oil starvation during...