Engine

Aluminum flywheel - 1979-88

Aluminum flywheelFIAT and Bertone X1/9 - 1979-1988 (1498cc) Reduces rotating mass - Total weight 7.95 lbs (3.6kg)

Aluminum flywheel - 1974-78

Aluminum flywheelFIAT X1/9 - 1974-1978 (1290cc) Special order item, allow 6 to 8 weeks for delivery  

Bell Housing to Block Dowel

      Bell housing to block alignment dowel FIAT 124 Spider, Spider 2000 and Pininfarina 1966-1985 FIAT 124 Sport Coupe FIAT and Bertone X1/9 2 required per motor Sold each

Timing Belt - 1974-78

Premium Dayco timing beltFIAT X1/9 - 1974-1978 (1290cc) Premium Dayco timing belt - Don't trust your motor to "no name" belts sold elsewhere. A good timing belt is very important to the life of an engine - Don't take a chance on an no-brand belt or one...

Timing Belt - 1979-88

Premium timing beltFIAT X1/9 and Bertone - 1979-1988 (1498cc) Premium Dayco or Gates timing belt - Don't trust your motor to "no name" belts sold elsewhere. A good timing belt is very important to the life of an engine - Don't take a chance on an...

Connecting Rod Bearing Set - 1498cc

Connecting rod bearing set FIAT X1/9 and Bertone - 1979-1988 (1498cc) Select desired size

Main Bearing Set - 1438, 1608 and 1290, 1498cc

Main bearing set FIAT 124 Spider - 1966-1973 (1438 and 1608cc)FIAT 124 Sport Coupe - 1967-1973 (1438 and 1608cc)FIAT and Bertone X1/9 - 1974-1988 (1290 and 1498cc)   Select desired size

Thrust Washer Set - Early

Thrust washer pairFIAT 124 Spider - 1966-1973 (1438 and 1608cc)FIAT 124 Sport Coupe - 1967-1973 (1438 and 1608cc)FIAT and Bertone X1/9 - 1974-1988   Choose Standard or Oversized option

Timing Belt Tensioner Bearing - 1498cc

Timing belt tensioner bearingFIAT and Bertone X1/9 - 1979-1988 (1498cc)   The tensioner bearing should be replaced at the same time as the timing belt.   Auto Ricambi tensioner bearings are imported directly from Italy.   Be wary of lesser...

Timing Belt Tensioner Bearing - 1290cc

Timing belt tensioner bearingFIAT X1/9 - 1974-1978 (1290cc)   The tensioner bearing should be replaced at the same time as the timing belt   Auto Ricambi tensioner bearings are imported directly from Italy   Be wary of lesser-quality...

Piston Pin

Piston or wrist pinFIAT 124 Spider, Spider 2000 and Pininfarina 1971-1985FIAT 124 Sport Coupe - 1971-1975FIAT and Bertone X1/9 - 1974-1988    

Piston Set - 1300cc and 1500cc

Premium piston setFIAT X1/9 and Bertone - 1974-1988   Stock type cast pistons Choose between 86.4 or 87mm diameters Standard size for 1300cc is 86.0mm, for 1500cc is 86.4mm Small valve cutouts result in a small compression increase on 1500cc...

Crankshaft Timing Belt Gear - 3mm flange

Crankshaft timing belt gear with a 3mm flange FIAT 124 Spider, Spider 2000 and Pininfarina - 1977 (from engine # 0430996) to 1985 FIAT X1/9 - 1974-1978   Replace if you see any signs of wear   Steel gear, as original  

Exhaust Valve - SOHC 1290cc

Exhaust valve FIAT X1/9 - 1974-1978 (1290cc)   31mm diameter head  

Exhaust Valve - SOHC 1498cc

Exhaust valve FIAT and Bertone X1/9 - 1979-1988 (1498cc)   33mm diameter head    

Intake Valve - SOHC

Intake valve FIAT and Bertone X1/9 - 1974-1988 (1290 and 1498cc)   36mm head diameter  

Steel Valve Guide - 1974-76 - 1290cc

Steel valve guide - 15mm OD FIAT X1/9 - 1974-1976 (1290cc)   15mm outside diameter, 46.5mm total length  

Adjustable Cam Gear - 1974-78

High-performance adjustable aluminum cam pulleys Allison PerformanceFIAT X1/9 - 1974-1978 (1290cc)   Allows cam timing to be dialed in perfectly Includes a degree scale for precise adjustment Features rear timing belt guard Lightweight...

Adjustable Cam Gear - 1979-88

High-performance adjustable aluminum cam pulleys Allison Performance FIAT and Bertone X1/9 - 1979-1988 (1498cc)   Allows cam timing to be dialed in perfectly Includes a degree scale for precise adjustment Lightweight design

Valve Shim Kit

Valve shim set FIAT 124 Spider, Spider 2000 and Pininfarina - 1966-1985FIAT 124 Sport Coupe - 1967-1975FIAT and Bertone X1/9 - 1974-1988   Our Italian manufactured valve clearance adjusting shim kit comes complete with: Hard plastic case with...

Valve Shims

Valve shim - Choose sizes neededFIAT 124 Spider, Spider 2000 and Pininfarina - 1966-1985FIAT 124 Sport Coupe - 1967-1975FIAT and Bertone X1/9 - 1974-1988 Keep your 124 Spider running smoothly by regularly checking the valve adjustments   Please...

Top Hat Shim or Lash Cap

Top hat shim FIAT 124 Spider, Spider 2000 and Pininfarina - 1966-1985FIAT 124 Sport Coupe - 1967-1975FIAT and Bertone X1/9 - 1974-1988   This shim is used when valve clearance is too large to take up with the regular shims, which usually occurs when...

Tappet - Cam Follower

Shim bucket (Tappet or cam follower) FIAT 124 Spider, Spider 2000 and Pininfarina - 1966-1985FIAT 124 Sport Coupe - 1967-1975FIAT and Bertone X1/9 - 1974-1988  

Stock Cast Iron Valve Guide - 1978-85

Stock cast iron valve guide FIAT 124 Spider, Spider 2000 and Pininfarina - 1978-1985FIAT and Bertone X1/9 - 1979-1988 (3mm shorter than stock)   These guides have an outside diameter of 14mm For 124s: from engine no. 0554875 Sold...

Performance Bronze Valve Guide - 1978-85

High Performance bronze valve guide FIAT 124 Spider, Spider 2000 and Pininfarina - 1978-1985 FIAT and Bertone X1/9 - 1979-1988 (3mm shorter than stock)   These performance bronze guides have an outside diameter of 14mm For Spiders, from...

Valve Spring Keeper

Valve spring keeperFIAT 124 Spider, Spider 2000 and Pininfarina - 1966-1985FIAT 124 Sport Coupe - 1967-1975FIAT and Bertone X1/9 - 1974-1988   2 required per valve or 16 per engine   Sold individually  

Non Magnetic Oil Drain Plug

Non-magnetic oil drain plugFIAT 124 Spider, Spider 2000 and Pininfarina - 1966-1985FIAT 124 Sport Coupe - 1967-1975FIAT and Bertone X1/9 - 1974-1988 (Transmission only) Requires a 12mm allen wrench - our part number LU0-001 Also fits transmission and...

Magnetic Oil Drain Plug

Magnetic oil drain plugFIAT 124 Spider, Spider 2000 and Pininfarina - 1966-1985FIAT 124 Sport Coupe - 1967-1975FIAT and Bertone X1/9 - 1974-1988 (Transmission only) Requires a 17mm wrench Also fits transmissions and differentials Does not fit the new...

Oil Drain Plug Bolt Allen Wrench

Oil drain plug allen wrenchFIAT 124 Spider, Spider 2000 and Pininfarina - 1966-1985FIAT 124 Sport Coupe - 1967-1975 FIAT and Bertone X1/9 - 1974-1988   Tool handle length may vary Note: this tool does not work on the drain plugs installed in the new...

Oil Pump

Oil pumpFIAT X1/9 and Bertone - 1974-1988

Oil Pump Drive Gear Bushing

Oil pump drive gear bushingFIAT 124 Spider, Spider 2000 and Pininfarina - 1966-1985FIAT Sport Coupe - 1967-1975FIAT and Bertone X1/9 - 1974-1988 Presses into the engine block and holds the oil pump drive gear

High Performance Oil Sending Unit Adaptor

  Oil sender T bolt and banjo doublerFIAT 124 Spider, Spider 2000 and Pininfarina - 1966-1985 FIAT 124 Sport Coupe - 1967-1975 FIAT and Bertone X1/9 - 1974-1988   Allows the use of 2 senders when only one port is available

Flame Trap

Flame trap or spark arrestorFIAT 124 Spider, Spider 2000 and Pininfarina - 1966-1985FIAT 124 Sport Coupe - 1967-1975FIAT and Bertone X1/9 - 1974-1988 Installs in the air cleaner end of the long crankcase breather / ventilation hose

Oil Filler Cap

Oil filler capFIAT 124 Spider, Spider 2000 and Pininfarina - 1966-1985FIAT 124 Sport Coupe - 1967-1975FIAT and Bertone X1/9 - 1974-1988 Supplied complete with new seal

Oil Filler Cap Gasket

Oil filler cap rubber gasketFIAT 124 Spider, Spider 2000 and Pininfarina - 1966-1985FIAT 124 Sport Coupe - 1967-75FIAT and Bertone X1/9 - 1974-1988 Manufactured in Italy to the highest standards by Athena, specifically for your Fiat  

Silicone Oil Filler Cap Gasket

Silicone oil filler cap sealFIAT 124 Spider, Spider 2000 and Pininfarina - 1966-1985FIAT 124 Sport Coupe - 1967-75FIAT and Bertone X1/9 - 1974-1988Manufactured in Italy to the highest standards by Athena, specifically for your Fiat

Oil Temperature Sending Unit

Oil temperature sending unit for Veglia gaugesFIAT 124 Spider, Spider 2000 and Pininfarina - 1966-1985FIAT 124 Sport Coupe - 1967-1975FIAT and Bertone X1/9 - 1974-1988 Has 14x1.5mm threads, same as the oil pressure senders  

Oil Pressure Light Sending Unit

Oil pressure light sending unit (switch)FIAT 124 Spider, Spider 2000 and Pininfarina - 1966-1985FIAT 124 Sport Coupe - 1967-1975FIAT and Bertone X1/9 - 1974-1988 Controls the low pressure warning light For the gauge level sending unit, use LU8-047

Oil Pressure Gauge Sending Unit Boot

Oil pressure gauge sending unit bootFIAT 124 Spider, Spider 2000 and Pininfarina - 1966-1985FIAT 124 Sport Coupe - 1967-1975FIAT and Bertone X1/9 - 1974-1988   Fits the oil pressure senders   Correct color    

Oil Gauge Sending Unit

Oil pressure gauge sending unitFIAT 124 Spider, Spider 2000 and Pininfarina - 1966-1985 FIAT 124 Sport Coupe - 1967-1975 FIAT and Bertone X1/9 - 1974-1978   Controls the gauge level indicator   For the light sending unit LU8-007

Oil Gauge Sending Unit - OEM

Oil pressure gauge sending unit - Original Equipment ManufacturerFIAT 124 Spider, Spider 2000 and Pininfarina - 1966-1982 FIAT 124 Sport Coupe - 1967-1975 FIAT and Bertone X1/9 - 1974-1978   Controls the gauge level indicator   OEM Original...

Oil Gauge Sending Unit - 1983-85

Oil pressure level sending unitFIAT Spider Pininfarina - 1983-1985FIAT X1/9 - 1974-1978 Controls the gauge level - Sender with wire pigtail

Oil Gauge Sending Unit - 1983-85 OEM

Oil pressure level sending unitFIAT Spider Pininfarina - 1983-1985FIAT X1/9 - 1974-1978 Controls the gauge level - Sender with wire pigtail OEM Original Veglia Borletti - NOS New Old Stock

Crank Shaft Galley Plug - 10mm

Engine crank shaft oil galley plugFIAT 124 Spider, Spider 2000 and Pininfarina - 1966-1985FIAT 124 Sport Coupe - 1967-1975FIAT and Bertone X1/9 - 1974-1988 10mm   Four required per crankshaft

Valve Spring Set

Standard valve spring setFIAT 124 Spider, Spider 2000 and Pininfarina - 1966-1985FIAT 124 Sport Coupe - 1967-1975FIAT and Bertone X1/9 - 1974-1988It is recommended that the valve springs be replaced during an engine rebuild

Isky High Performance Valve Springs

High performance Iskenderian valve spring setFIAT 124 Spider, Spider 2000 and Pininfarina - 1966-1985FIAT 124 Sport Coupe - 1967-1975FIAT and Bertone X1/9 - 1974-1988 Specially engineered for high RPM street or race motors to avoid coil bind and...

14-Bolt Head Gasket

14-Bolt head gasket FIAT and Bertone X1/9 - 1974-1988   87.0mm bore diameter   1.80mm thick Manufactured in Italy to the highest standards by Athena, specifically for your Fiat

10-Bolt Head Gasket

10-Bolt head gasket FIAT X1/9 - 1974-1982   87.0mm bore diameter   1.4mm thick Manufactured in Italy to the highest standards by Athena, specifically for your Fiat

Valve Guide Seal

Valve guide sealFIAT 124 Spider, Spider 2000 and Pininfarina - 1966-1985FIAT 124 Sport Coupe - 1967-1975FIAT and Bertone X1/9 - 1974-1988 Sold individually

Crankshaft Front Seal

Front crank shaft oil sealFIAT 124 Spider, Spider 2000 and Pininfarina - 1966-1985FIAT 124 Sport Coupe - 1967-1975FIAT and Bertone X1/9 - 1974-1988 Manufactured in Italy to the highest standards by Athena, specifically for your Fiat

Lower Transaxle Mount

Lower transmission or transaxle mountFIAT X1/9 - 1975-1980   Intended for 1975-80 models but can be used on later X1/9s and Bertone - For later models there is no provision for attachement of the exhaust system