Performance Reground Intake Camshaft

Product Description

• 40/80 intake reground camshaft
• 10.1mm lift, 240 degrees duration at .050" (1.25mm) clearance
• Lash clearance 0.012" (0.30mm)
• This cam has no provision for a distributor drive gear - Intake only
• Sold individually 

This is a mid-range camshaft that will increase performance throughout the rpm range.  It is mild enough to be used on fuel injected vehicles.  As with any performance cam, it works best with an increase in compression ratio.

Reground cams have a slightly smaller base circle than stock - top hat shims CH9-600 may have to be used to obtain correct valve clearance.

If out of stock, the exhaust camshaft CH2-047 may be used - it is identical to the intake camshaft in profile and timing.

Not for use on emission controlled motor vehicles.