Product Description
New steel billet performance camshaft for carbureted or fuel injected engines (intake or exhaust)
FIAT 124 Spider, Spider 2000 and Pininfarina - 1966-1985 - Carbureted only
FIAT 124 Sport Coupe - 1967-1975
FIAT 124 Sport Coupe - 1967-1975
- 285 degree duration and 68 degrees of overlap at running clearances
- 9.8mm lift
- Cam timing is 34-72 72-34, lobe centers at 109 degrees
- Lash clearance: Intake 0.20mm (0.008"), exhaust 0.25mm (0.010")
- Can be used on the intake or exhaust side
- Ground in the U.S. from European made blanks
- Increased compression ratio recommended (around 9.8:1 is best)
- Sold individually
This is a mid range camshaft that will increase performance throughout the rpm range - It has a stronger top end than the 284 camshaft - Not recommended for fuel injected engines
Not for use on emission controlled motor vehicles
