Product Description
Colombo and Bariani 294 performance camshaft
FIAT 124 Spider, Spider 2000 and Pininfarina - 1966-1980 - Carbureted
FIAT 124 Sport Coupe - 1967-1975
FIAT 124 Spider, Spider 2000 and Pininfarina - 1966-1980 - Carbureted
FIAT 124 Sport Coupe - 1967-1975
This is a NEW cam, not reground, not welded, but made by Colombo and Bariani in Italy from NEW billet stock!
- Hardness has been independently tested
- 294 degree duration
- 10.3mm lift
- Very powerful fast road cam with timing 42-72 72-42
- Other modifications are necessary to get the most benefit from performance camshafts, we recommend a minimum of 9.8:1 compression ratio
- Can be used just on the intake side, or for the largest power increase, on both the intake and the exhaust
- All cams come with the distributor drive gear and can be used on either the intake or exhaust side
- Camshaft pulley bolt torque is 87 ft-lb (118Nm)
Not for use on emission controlled motor vehicles
