Tools

New Tool Kit

  Brand new tool box complete with all correct toolsFIAT 124 Spider, Spider 2000 and Pininfarina - 1966-1985FIAT 124 Sport Coupe - 1967-1975FIAT and Bertone X1/9 - 1974-1988 Ideal for concours restoration - very limited supply    

Warning / Reflective Safety Triangle

Safety Triangle FIATs All   Required in Europe and not a bad idea to have in the USA   Supplied with case

Clutch Alignment Tool - 124

Clutch alignment toolFIAT 124 Spider, Spider 2000 and Pininfarina - 1966-1985FIAT 124 Sport Coupe - 1967-1975 Used to hold the disc centered on the flywheel during installaion of a new clucth

Valve Cover Bolt Tool

Custom billet valve cover bolt tool FIAT 124 Spider, Sport Coupe, Spider 2000 and Pininfarina - 1966-1985   Wrench for our custom billet valve cover bolts - 19mm   Does not fit stock valve cover bolts  

Valve Stem Height Tool

Valve stem height tool FIAT 124 Spider, Spider 2000 and Pininfarina - 1966-1985FIAT 124 Sport Coupe - 1967-1975   This tool is used to check that the valves are at the correct height after a valve job - If height exceed gauge, valve stem must be...

Valve Adjusting Tool

Valve shim adjusting toolFIAT 124 Spider, Spider 2000 and Pininfarina - 1966-1985FIAT 124 Sport Coupe - 1967-1975   This tool is used to hold down the shim bucket while the shim is replaced   Works even for the hard to reach #4 exhaust valve...

Valve Adjusting Tool - OEM ORIGINAL

    Valve shim adjusting toolFIAT 124 Spider, Sport Coupe, Spider 2000 and Pininfarina - 1966-1985   This tool is used to hold down the valve bucket while the shim is replaced   This is an OEM original FIAT factory tool

Oil Pan Guard L-bracket

Oil pan guard L-bracketFIAT 124 Spider, Spider 2000 and Pininfarina - 1966-1985FIAT 124 Sport Coupe - 1967-1975  Two needed to install the oil pan guard on a 1966-1978 FIAT 124 Bolts not included

Oil Drain Plug Bolt Allen Wrench

Oil drain plug allen wrenchFIAT 124 Spider, Spider 2000 and Pininfarina - 1966-1985FIAT 124 Sport Coupe - 1967-1975 FIAT and Bertone X1/9 - 1974-1988   Tool handle length may vary Note: this tool does not work on the drain plugs installed in the new...

Cylinder Head Bolt Tool - Ribe 12

  Cylinder head bolt toolFor use with FIAT 124 Spider, Sport Coupe, Spider 2000 and Pininfarina 1966-1985 For use with our EN5-468 Ribe 12 Head Bolt Kit Durable and made in the USA  

Carburetor Synchronizer Tool

Carburetor synchronizer toolFIAT 124 Spider, Spider 2000 and Pininfarina - 1966-1980 (with IDF carburetors)FIAT 124 Sport Coupe - 1967-1975 (with IDF carburetors)FIAT and Bertone X1/9 - 1974-1980 (with DCNF or DCOE carburetors) A must for properly...

Front Control Arm Bushing Tool

    Front control arm bushing toolFIAT 124 Spider, Sport Coupe, Spider 2000 and Pininfarina - 1966-1985 Used to remove and replace both upper and lower front control arm bushings   See instructions here.

Rear Trailing Arm Bushing Sleeve Tool - 1968-78

    Rear trailing arm bushing sleeve tool FIAT 124 Spider, Sport Coupe, Spider 2000 and Pininfarina - 1968-1978 Used to install the sleeves into new hour glass style SU2-472 rear trailing arm bushings

Tie Rod End Removal Tool

Tie rod end removal toolFIAT 124 Spider, Spider 2000 and Pininfarina - 1966-1985FIAT 124 Sport Coupe - 1967-1975FIAT and Bertone X1/9 - 1974-1988

Spring Compressor

Spring compressor FIAT 124 Spider, Spider 2000, Pininfarina - 1966-1985FIAT Sport Coupe - 1967-1975   Single unit - can be used to replace front springs on the FIAT 124   Note: Compressed springs store a huge amount of energy!  If a...