Product Description
Stainless Steel Abarth style header - Inspired by those used on the World Rally Championship 124 Spider CSA, but with a modified downpipe to fit the Spider 2000.
FIAT Spider 2000 and Pininfarina - 1980-1985
Made for the fuel-injected FIAT 124 Spiders, but can be adapted to the 1979-1980 carbureted Spider 2000 if the converter flange from the OE pipe is reused.
Designed to enhance performance at both mid-range and top-end
- Three-piece header with 50mm (~2") OD outlet
- Stainless steel construction
- The two upper halves and the down pipe bolt together to ensure a leak-free fit - unlike headers with slip-joints
- Two donut gaskets and six bolts are included to connect the downpipe to the upper pipes
- Connects to stock 4-bolt flange converter or test pipe via the included 4-bolt flange - This can be left off if one is fabricating a custom exhaust
- Don't forget to purchase the required exhaust manifold gasket GA4-425
- For exhaust nuts, use our part number EX0-011 (5 needed); for replacement donut gaskets, use our part number GA4-481.
- This header features a bung for an oxygen sensor - if a sensor is not used, please add plug EX5-444 and washer EX5-445 to close the hole.
The design of this header is based on those installed on the 124 Spider Abarth Rally. Our design features header pipes are aligned with the ports and angled very slightly. This a much better design than others that have pipes coming out of the head at an angle and thereby creating a sharp turn for the exhaust gases, thus restricting flow.
Not for pollution-controlled motor vehicles - This may not be legal in some areas; please check your local regulations.
Download
Installation instructions
Product Videos
Custom Field
Note Performance products are designed for off-road use only. Not legal for use on vehicles equipped with emission-controls.